Pers eksentrik - kolom tunggal

EBU 25 SK

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1970, nomor mesin/kendaraan: 5058870, Pressing force: 25 t Throat depth: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 /min Drive motor: 380 V, 1.1 kW Space requirement: 1600 x 850 x 2000 mm Weight: approx. 1450 kg Hedpfxem Uxzue Alasl

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2000, lebar kerja: 3.050 mm, sudut pemotongan (min.): 0,5 °, sudut pemotongan (maks.): 3 °, ketebalan lembaran (maks.): 6 mm, penahan belakang: 750 mm, tegangan masuk: 380 V, berat keseluruhan: 4.500 kg, Gunting hidrolik potong vertikal Merek: HACO Model: TS 306 Penjual: Casanova Tiga fasa 380V Tahun: 2000 Tipe: Potong vertikal (kemiringan pisau) Panjang potong: 3050mm Kapasitas: 6mm Pengaturan sudut potong: 0,5-3 derajat Jumlah penahan: 13 Hsdpfx Alsxgdlneasl Pukulan per menit: 8-14 Lengan siku: 1000mm Batas belakang: 750mm Batas belakang bermotor dengan roda tangan penyesuaian halus Motor: 7,5 kW Berat: 4500kg

Kondisi: baik (bekas), Tahun pembuatan: 2000, lebar meja: 1.000 mm, panjang meja: 1.800 mm, lebar pelat tuas: 600 mm, panjang total: 25.000 mm, lebar total: 27.000 mm, tinggi total: 47.000 mm, berat keseluruhan: 43.000 kg, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Sick photoelectric sensor Separate Rittal control cabinet Hodpfxstiwgij Alaol Side walkways Floor-level installation

Kondisi: baik (bekas), Manufacturer: OMERA Hjdpskvnumsfx Alaol Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1990, nomor mesin/kendaraan: 4ROLL, diameter roller (bawah): 470 mm, diameter rol atas: 470 mm, diameter roll samping: 420 mm, diameter rol: 470 mm, panjang rol: 3.050 mm, lebar kerja: 3.050 mm, tinggi kerja: 1.800 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 45 mm, tebal plat aluminium (maks.): 45 mm, ketebalan pelat tembaga (maks.): 45 mm, berat keseluruhan: 43.000 kg, panjang total: 7.700 mm, lebar total: 2.410 mm, tinggi total: 2.470 mm, daya: 37 kW (50,31 hp), tegangan masuk: 380 V, jenis arus masuk: tiga fasa, panjang kerja: 3.050 mm, Perlengkapan: dokumentasi / manual, henti darurat, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 DESCRIPTION: Four-roll hydraulic plate bending machine with linear guideways and double pinch pre-bending capability. Machine is in good working condition. BENDING CAPACITY: - Plate width: 3,000 mm - Maximum rolling thickness: 40 mm - Pre-bend thickness: 35 mm ROLL DIMENSIONS: - Useful length: 3,050 mm - Diameter of central rolls (upper/lower): 470 mm Hedpfx Aewb Scmslajl - Diameter of side rolls (left/right): 420 mm FEATURES: • Surface hardened 4 rolls for increased strength and durability • Three driven rolls powered by separate hydraulic motors with gearboxes • Conical bending device: side rolls tiltable for cone bending, equipped with contrast pad roller • Hydraulic front drop-end for easy removal of finished shells • Variable working speed for the roll bending, with fast/slow hydraulic rotation • Mobile electric control console on wheels, with centralized commands, joysticks, and 3 digital position readouts • Digital readout for precise positioning and repeatability of bending and pre-bending operations • Hydraulic oil tank capacity: 350 liters; electric power: 37 kW; voltage: 380V / 50 Hz • Machine dimensions: 7,700 x 2,410 x H 2,470 mm; weight: 43,000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical capabilities specified in the manual, on workpieces made of plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical work table allows for easy loading and unloading of workpieces, while minimizing the machine footprint to the necessary minimum. Tool changes are accomplished using a 10-position tool magazine mounted on the side of the unit, which enables a variety of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speeds (m/min): X = 30 Y = 30 Z = 15 Hsdpfx Asmzbr Sjlaol Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp: ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Kondisi: baik (bekas), Brand: Ercolina Model: CE40H3 Year of manufacture: 2006 Hydraulically driven Roller diameter: Ø 165 mm Shaft diameter: Ø 40 mm Tube capacity (thin-walled): Ø 70x1.5mm, minimum bending radius Ø 700 mm Hjdow Hx Tvopfx Alasl Tube capacity (thick-walled): Ø 2" x 3.2 mm, minimum bending radius Ø 450 mm Angle bar capacity: 50x50x6 mm, minimum bending radius Ø 400 mm Flat bar capacity: 50x10 mm, minimum bending radius Ø 250 mm Flat bar capacity (on edge): 100x15 mm, minimum bending radius Ø 250 mm Box section capacity: 50x50x3 mm, minimum bending radius Ø 500 mm Shaft capacity: Ø 35 mm, minimum bending radius Ø 250 mm Motor power: 1.85 kW Bending speed: 10 rpm

Kondisi: bekas, en_001_TechnicalDetails_2024-06-18 Hedevr S Ulspfx Alasl

Kondisi: bekas, nomor mesin/kendaraan: 59062, Rill- und Leimmaschine für Umschläge – Karl Tränklein CGM (b) Creasing & Gluing Machine for Covers, Serial No. 59062/5 Max. working width: 500 mm Online video inspection via Skype video possible. We would be pleased to welcome you for an on-site visit – further machines available in stock. Immediately available – inspection possible at any time. Hjdsh Axd Nspfx Alasl Located in Emskirchen, near Nuremberg – machine can be tested on site.

Kondisi: baru, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Hodpfxsfg Rlce Alajl Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirement approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for series cutting from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle. CNC automatic machine with multiprocessor control and two axes controlled by the latest generation MEP control system, enabling the programming of up to 1000 different cutting programs, each with different cutting lengths and quantities, for the same material thickness.