Dingin Circular Saw

EISELE VMS 4HYD 440

Kondisi: baru, Saw blade diameter: 315/350 mm Cutting capacity at 90°: round 125 mm Cutting capacity at 90°: square 110 mm Cutting capacity at 90°: flat 160 x 90 mm Cutting capacity at 45°: round 105 mm Cutting capacity at 45°: square 90 mm Cutting capacity at 60°: flat 80 x 100 mm Total power requirement: 1.8/2.5 kW Machine weight: approx. 0.2 t Space requirement: approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For miter cuts to the right and left up to 45°, positive stops at 90° and at 45° left • Suitable for sawing steel, stainless steel, and, with limitations, aluminum profiles Dsdod Iin Tepfx Abhjun • Vise with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Hardened steel cone safety clutch to protect the saw blades • Large heavy-duty cast base plate for maximum stability and low-vibration operation • Two speeds: 30 + 60 rpm • High-performance special gearbox with flexible coupling for heavy-duty use • Automatic blade cooling system • Double-supported saw head • 24 V safety switch integrated into the handle with restart protection • Length stop, assembly tools ATTENTION: Price is WITHOUT saw blade!!!

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Fence travel range at the rear 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 extraction ports (top of hood and bottom). Net weight 600 kg. Dimensions WxDxH 135x140x150 cm. RAL 9007 Grey Aluminium. Turntable made of ground nickel steel. Saw head with recirculating ball guides, designed for high precision, durability, and rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed toward extraction hood. Equipment: • Precision under-table circular saw • Mitre angle adjustment 0º/45º/90º/-45º/-60º, stepless • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! Dujdpfx Abogwt S Tshen Our NC pushing system ensures that your workpieces are positioned at the desired processing point on our UK 600 HA 90°. A gripper clamps the material, and the NC control automatically positions it. Afterwards, clamping and the sawing process are initiated. Positions are pre-programmed into the control system. Once the machine finishes the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired system at our production or demonstration hall at any time. Please feel free to contact us. Plantec Maschinen GmbH

Kondisi: sangat baik (bekas), Single-Sided Destacking Station - Upper traverse horizontally movable by 180° - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Sliding front safety guard Dedpscggy Sefx Abhsun - Separate control cabinet and operator panel - External roller conveyor for stack of sheets from the destacking unit - External powered roller conveyor from destacking unit, also with belt for transferring sheets at 90° - Operating capacity (cycles/min): 12–15 - Sheet thickness (min/max) mm: 10–40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Kondisi: bekas, Tahun pembuatan: 2006, de-2006 Hurco VM1 Vertikal-Bearbeitungszentrum Dsdpfx Aev Suwiobhjun Baujahr: 2006 Technische Daten – Hurco VM1 VMC Allgemeine Angaben Abmessungen Breite: 1.800 mm Abmessungen Tiefe: 1.900 mm Abmessungen Höhe: 2.600 mm Maschinengewicht: 2.700 kg Hauptantrieb Anzahl der Spindeln: 1 Spindeldrehzahlbereich: 40–8.000 1/min Spindelmotorleistung: 11 kW Verfahrwege X-Achse Verfahrweg: 660 mm X-Achse Arbeitsvorschub: 8 m/min X-Achse Eilgang: 20 m/min X-Achse Genauigkeit: 0,005 mm Y-Achse Verfahrweg: 350 mm Y-Achse Arbeitsvorschub: 8 m/min Y-Achse Eilgang: 20 m/min Y-Achse Genauigkeit: 0,005 mm Z-Achse Verfahrweg: 450 mm Z-Achse Arbeitsvorschub: 8 m/min Z-Achse Eilgang: 20 m/min Z-Achse Genauigkeit: 0,005 mm Werkstück Werkstückgewicht: 350 kg Aufspanntisch Außenlänge: 762 mm Außenbreite: 356 mm Lieferung & Aufstellung gegen Aufpreis möglich – bitte Preise anfragen.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Manufacturer: KASTO Model: KASTOtec A4 Year of manufacture: 2001 Specifications Metric US Standard Cutting capacity round 90°: 430 mm Cutting capacity flat 90°: 430 x 430 mm Feed length range: 0 - 600 mm Multi-feed length range: 0 - 9999 mm Minimum cutting length: 35 mm Maximum cutting speed: 12 - 120 m/min Saw blade dimensions: 6830 x 41 x 1.3 mm Motor power: 7.5 kW Dimensions (approximate) Length: 4800 mm Width: 2200 mm Height: 2200 mm Weight: 5200 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, these details do not constitute representations or contractual terms. We recommend verifying all important details. Djdpfx Aju R R Avsbhjun

Kondisi: bekas, 100 m³ buffer tank made of steel, horizontal, mounted in a frame Volume: 100,000 l Dimensions (LxWxH): 15,400 mm x 3,500 mm x 3,500 mm Dujdpfx Ajtv Rp Hebhon Insulation: 100 mm mineral wool, all around Wall construction: insulated walls, painted in RAL 9002 Operating pressure: 3.0 bar Test pressure: 4.5 bar Connections: 1 x manhole for inspection/maintenance 1 x connection nozzle (flow and return (boiler)) 1 x connection nozzle (flow and return (consumer)) 2 x PT 100 temperature sensors

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition Djdpfx Abjd N H A Neheun

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: Dodsdfgg Ijpfx Abhjun A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Dalam kondisi teknis yang baik dan sepenuhnya berfungsi. Tahun pembuatan 2008. Sumbu Y tambahan ±60 mm Kecepatan putar spindel maksimum 3.000 rpm Daya motor spindel 22/18,5 kW Kecepatan maksimum alat penggerak 6.000 rpm - Chuck 300 mm dengan lubang tembus 90 mm, kepala spindel A2-8 - Daya dan torsi meningkat 25/30 kW, 1.000/1.300 Nm - Diameter pembubutan 420-500 mm - Panjang pembubutan 1.250 mm - Sumbu C, alat penggerak - Tailstock NC, sepenuhnya dapat diprogram, motor terpisah Dodpfx Abjxdcigjheun - Daya sumbu Z ditingkatkan - Konveyor serbuk baru

Kondisi: baik (bekas), Tahun pembuatan: 2008, jenis kontrol: Kontrol CNC, jenis aktuasi: hidrolik, gaya penekanan: 300 t, CNC crowning Hydraulic tool clamping Djdpfswrza Ajx Abhsun EFL Easy Form laser measuring & correction system Set tooling Laser safety guard CNC-controlled axes: Y1/Y2/X/R/V axes Max. bending length: 4000 mm Distance between uprights: 3150 mm Max. pressing force: 320 t Clearance between table and ram: 570 mm Max. stroke: 300 mm Table width: 200 mm Frame throat depth: 400 mm Approach speed: 120 mm/min Working speed: 14 mm/min Return speed: 130 mm/min X-axis range: 1000 mm Control unit: CADMAN Power: 42 kW Length: 5800 mm Width: 2300 mm Height: 3800 mm Weight: 23,000 kg