Gergaji bundar dingin

EISELE VMS III PV

Kondisi: baik (bekas), Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, Type: VMS III - PV Machine No.: 8518 Year of Manufacture: 1980 Technical Data: Saw motor, 2-stage: 2.0 / 2.6 kW Saw blade: 350 mm 4 cutting speeds: 8.5 / 17 / 34 / 68 rpm Clamping range, flat/round: 200 / 120 mm Feed length, single stroke: 5 - 600 mm Feed length, double stroke: 1200 mm Dsdpfx Aasy Dcmbsqskl

Kondisi: baik (bekas), Tahun pembuatan: 2000,

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0783, Mitre Cold Circular Saw EISELE Model: VMS-III-S-PV Type No.: 430 Machine No.: 0783 Year of manufacture: 1986 Cutting range at 90° (Round): Ø 120 mm Cutting range at 90° (Flat): 150 x 110 mm Cutting range at 45° (Round): Ø 100 mm Cutting range at 45° (Flat): 120 x 100 mm Djdpfx Aot A Ar Sjaqskl Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 2 and 2.6 kW Power supply: 380 Volt, 50 Hz Equipment: - Semi-automatic vertical cold circular saw - Pneumatic quick clamping device for material - Continuously adjustable pneumatic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage on a very robust rectangular guide - Convenient, continuously adjustable stroke setting of the saw unit via clamping lever - Generously dimensioned gearbox - With Eisele rotation compensation for long saw blade service life - Easy saw blade exchange - High productivity with minimal space requirement (less than 1 m²) - Coolant system integrated in the machine base Space required: 1100 x 710 x 1900 mm (L x W x H) Weight: 460 kg The machine can be inspected and tested under power at our facility by appointment. All information is subject to change without notice. Subject to prior sale. The item is sold without any warranty. This exclusion does not apply to damages resulting from gross negligence or intentional misconduct by the seller, nor to injury to life, limb or health.

Kondisi: bekas, Tahun pembuatan: 1989, Saw blade diameter 320 mm Cutting diameter 140 mm Total power requirement 3 kW Machine weight approx. 0.5 t O F F E R Dksdpfx Aaew Dvivsqol We are pleased to offer you, subject to prior sale and errors excepted, the following from stock without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Type VMS III-S-PV Year of manufacture 1989 _____ Max. saw blade Ø 320 mm Cutting capacity: Tubes approx. 130 mm Flat material 200 x 100 / 140 x 100 mm Solid material square 120 mm Note: Smaller cutting dimensions may apply for mitre cuts Up to max. 140 mm Blade stroke manually vertical approx. 200 mm Saw blade speeds 17–34 rpm Saw drive approx. 2 / 2.6 kW Total drive approx. 3 kW – 380 V – 50 Hz Weight approx. 500 kg Accessories/Special equipment: • Saw head adjustable for mitre cuts at 30° / 45° / 90° via scale • Pole-changing three-phase motor with max. 2.6 kW drive • Saw carriage feed manually via long and adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant device with chip tray • Roller conveyor material infeed approx. 2,000 mm • 2 spare saw blades Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice We look forward to your order. We also have further larger EISELE cold circular saws and other (band/frame/cold circular) saws in stock. Further sawing machines available at all times – please enquire with us.

Kondisi: bekas, Tahun pembuatan: 2002, Dimensi pemesinan (diameter alat 25mm): X=3015 mm Y=1483 mm Z=325 mm Maks. pergerakan sumbu: X=3268 mm Y=1483 mm Z=325 mm Kecepatan pemrograman maks.: X/Y = 75 m/menit / Z = 30 m/menit Dudukan alat HSK 63F Unit bor 7964, 14 spindle bor vertikal dengan rasio 32 mm (10 di x / 4 di y) Unit gergaji 7946 3,6 kW, dapat diputar pneumatik 90° Unit frais 7933 9 kW kayu dengan sumbu C Magasin alat (piringan, 6 slot) Panel kontrol manual Perangkat laser (untuk posisi cangkir vakum) Panel kontrol PC dengan monitor 17" Sistem operasi Windows 2000 Perangkat lunak: TwinCAM32 – versi kantor Pompa vakum 100 m³/jam, tipe kering, karpet alas keselamatan selektif (pembagian 3 bidang) Dkodovvi Nbepfx Aaqsl Lokasi penyimpanan: Nattheim

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, kapasitas angkut: 18.000 kg, tinggi angkat: 4.000 mm, pengangkatan bebas: 2.000 mm, jenis bahan bakar: diesel, tipe tiang: dupleks, tinggi konstruksi: 3.695 mm, daya: 168 kW (228,42 hp), lebar kerangka garpu: 2.500 mm, panjang garpu: 2.400 mm, jenis penggerak: Diesel, Heavy-duty forklift – Diesel Load center: 600 mm Fork width: 200 mm Fork thickness: 100 mm Mast type: Duplex Transmission: ZF 3WG171 Condition: New machine Technical condition: New Front tires type: Pneumatic Front tires size: 12.00 x 20 Rear tires type: Pneumatic Rear tires size: 12.00 x 20 Description: Side shifter, fork positioner, KALMAR SV/GV – fork carriage with center level adjustment, width B = 2500 mm, Terminal-West quick-change system for SV/GV fork carriage, additional hydraulic function incl. hoses, Kalmar comfort cabin EGO with air conditioning ECC, fresh air filter, tinted windows, and air-suspended and leather-reinforced driver’s seat Grammer Actimo XL. Radio with DAB+/CD/RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming 12/24V voltage converter incl. 2 x 12V and 2 x 24V sockets Load weight indicator on display Directional control switch on lift hydraulics lever Engine preheater 220 V Accumulator for lift hydraulics Hydraulic oil cooler with fan Mast tilt 14° forward and 10° backward LED beacon, height adjustable Kalmar fork blades, fork length: 2,400 x 200 x 100 mm Dsdsuahtbjpfx Aaqokl Raised air intake for air filter with pre-separator Mudguards on the drive axle, mudguards on the steering axle Anti-slip coating on front wheel covers and tank 2 additional LED headlights on mast below standard headlights 2 additional LED headlights at the front cab corners, forward facing 6 additional LED headlights at the rear cab corners with protective guard Blue Spot, front and rear Automatic central lubrication system on steering axle and fork carriage Sensor-controlled Forrex fire suppression system – automatic and manual activation Fire extinguisher 6 kg (powder) EN3 Rear view camera mounted on cab roof, with color monitor in cab Camera in mast – connected to monitor in cab (in combination with rear view camera) Tire pressure monitoring

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, FAMUP MCP 45 CNC Machining Centre TECHNICAL DATA Axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed Working feed X, Y, Z: 10,000 mm/min Rapid traverse X, Y, Z: 30,000 mm/min Working feed force X, Y: 2,000 N Working feed force Z: 3,300 N Pallet Dimensions: 400 x 300 mm Number of T-slots: 2 T-slot width: 14 mm T-slot spacing: 80 mm Max. table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10,000 rpm Tool Changer Magazine positions: 16 Max. tool diameter: 63 mm Max. tool length: 150 mm Max. tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3,000 kg Dsdpfjq U Rm Hox Aaqskl No guarantee is given for the correctness, completeness or up-to-dateness of the information.

Kondisi: bekas, Tahun pembuatan: 2005, - Fagor 8055 CNC control - Additional tank for through-spindle cooling (15 bar) 400 liters Dkedpfxotvf Hts Aaqsl - Year of manufacture: 2005 Technical specifications: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Max. table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Kondisi: baik (bekas), Tahun pembuatan: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant supply, linear guides, and 30-position tool magazine Table size 2 x 1000 x 450 mm Tool holder DIN 69871 ISO 40 Travel distances X-axis 1100 mm Y-axis 500 mm Dedped I R E Njfx Aaqskl Z-axis 640 mm Spindle speed range 50 – 10,000 rpm Table load capacity 600 kg Feed range X/Y/Z, infinitely variable - 10,000 mm/min Rapid traverse in all axes 30 m/min Drive power 18.5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm Weight approx. 6,700 kg Accessories / Special Features: • CNC path control SIEMENS 840 D • Dual pallet changer • 30-position tool changer • Fully enclosed safety cabin with electrically interlocked doors • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating carriages for uniform absorption of high torques in all directions • Ball screws in all 3 axes • Entire machine bed made from Meehanite cast iron for precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Hinged belt chip conveyor with integrated coolant system • 4th axis preparation • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Tahun pembuatan: 2006, Kondisi: baik (bekas), Fully equipped 5-axis vertical machining center with direct-drive technology. Dkodpfxjpkyn Rs Aaqel Machine fitted with a 30,000 rpm spindle, 60-position tool magazine, and Heidenhain TNC 530 CNC.