Circular saw

EISELE VMS IV OS

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Hodpfokfp D Tox Ad Rjr Speed: 17/34 rpm Cutting capacity: Round 90°/45° right, left/30° right: 130/130/105 mm Square 90°/45° right, left/30° right: 120x120/100x100/90x90 mm Rectangular 90°/45° right, left/30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Weight: 460 kg For further technical data, see PDF document. Technical data and dimensions: Subject to change/errors excepted.

Kondisi: baru, Tahun pembuatan: 2025, de Hjdpfx Adsv T Uvzs Rsr

Kondisi: bekas, Tahun pembuatan: 1979, de-sn440-gewicht Hsdpfx Adsf Dwa Us Rjr

Kondisi: bekas, Sheet width 4080 mm Sheet thickness 2.0 mm steel Sheet thickness, stainless steel (Niro): 0.8 mm Sheet thickness, aluminum: 2.5 mm Cutting angle 1.3 degrees Strokes 34 strokes/min Frame clearance 4310 mm Hedpfxjxabc Rs Ad Ror Backgauge – adjustable 15.0 – 750 mm Table height 820 mm Control system: ELGO Motor power 9.0 kW Machine weight approx. 3600 kg Dimensions (L x W x H): 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. 70,000 euros Special price on request The MHSU motorized guillotine shear is based on a torsionally rigid, robust welded construction combined with a dynamic, low-noise, and powerful geared motor. High static and dynamic rigidity is ensured by generously sized main assemblies such as the knife beam, support table, side frames, and main drive unit. The power shear is designed for sheet metal and plastics processing. This shear enables series production of clean, precise cuts with ease. Equipment: - NC heavy-duty electro-motorized guillotine shear (swing cut principle) - with ELGO NC control unit * digital readout for the backgauge * adjustable from the front right * nominal/actual value input * stepless adjustment over the entire traverse range * limit-value protection with limit switch - NC electro-motorized material/backgauge - shatterproof, torsion-free steel welded frame - compact and clear machine design - support table with handholds - 1x hold-down bar - 1x side gauge with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating manual Special accessories included: - Pneumatic sheet metal support for thin sheet cutting

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, SRF Master Illustration on the Left 2 m Extraction Arm Application Area - Low amounts of smoke/dust - Occasional use Benefits - Minimal repositioning of the extraction hood required - Greater flexibility thanks to additional hose connection at the rear Features - Safe operation due to filter monitoring - Extraction hood can be rotated and swivelled 360 degrees - Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation efficiency: >99% Filter material: Fiberglass fleece Hsdpodqzbrjfx Ad Ror Welding fume filter class: W3 Additional filters: Two pre-filters Basic Data Extraction capacity: max. 950 m³/h Extraction arm diameter: Ø 150 mm Extraction arm length: 2 m Extraction connection diameter: Ø 150 mm Power supply: 230 V / 50Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Kondisi: bekas, Tahun pembuatan: 2001, tr-d2fb06f8 Hodpfelug Tuox Ad Ror

Kondisi: baru, Tahun pembuatan: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator is engineered for demanding applications and effectively handles challenging materials that disrupt separation processes in commonly available market separators. SWZ water separators specialize in separating heavy fractions (non-ferrous metals) from plastics and other materials during secondary raw material recycling processes. The SWZ separator is fitted with a four-section copper water system featuring radial nozzles with adjustable linear geometry. The unit incorporates the latest generation divided separation mat. A modern pre-separation and material preparation module ensures rapid recovery and high purity of reclaimed materials (plastics, metals). Why use a water system? Our device utilizes a system inspired by gold recovery technology. Water acts both as a medium and a gentle separating force on materials. Heavier particles are gently washed and separated, ensuring no losses throughout the process. The unique properties of water, combined with our proprietary solutions, outperform traditional air separation technologies. SWZ-type separators are used for: - Separation of heavy and light materials (such as metal granulates contaminated with plastics, film, paper, cotton, fibers) - Cleaning plastics following air (dry) separation processes - Separation of metals in cable and non-ferrous recycling lines The SWZ-700 water separator, equipped with the latest module, achieves rapid processing, offering a high throughput of approximately 1200 kg/h. Operation description: Material enters the separator via the conveyor chute, reaching the module for initial fractionation based on mass and moisture parameters. Some material is separated during this initial stage. In the second module segment, the moisture content of the batch is further adjusted. Material then descends onto the separation table for final fraction sorting. This process yields recoverable materials on both sides of the separator. Construction features: The robust structural frame and inertia drive are constructed of materials selected to resist overload from vibration. The supporting frame offers excellent rigidity for reliable, long-term service. Thanks to the vibration drive design, no soil isolation is required. The separation table features hydraulic adjustment for angle of inclination, as well as a dedicated module for initial pre-fractionation and preparation. The water system includes multiple pressure valves, and its circulation is closed-loop—no continual external water supply is required as the system operates with recirculated water from onboard reservoirs. Hedpfeua Tbwox Ad Ror Our separators are tailored to the specific nature of your material, based on extensive expertise and ongoing laboratory research. Available in various models and sizes, each SWZ-700 separator is custom built to order.

Kondisi: bekas, Tahun pembuatan: 1967, Grinding length 1650 mm Grinding width 700 mm Workpiece height 600 mm Table clamping area 1500 x 500 mm Table speed 0 - 20 m/min Cross feed automatic 0 - 20 mm/stroke Grinding spindle speed 2000 rpm Grinding wheel diameter 300 mm Total power requirement 19 kW Machine weight approx. 5 t Machine dimensions (L x W x H) 5.92 x 3.12 x 2.65 m Accessories: 2 magnetic chucks each 750 x 600 mm, grinding wheel with flange, various grinding wheels and flanges supplied separately, wet grinding unit Hodett S Uaspfx Ad Rer

Kondisi: baru, Tahun pembuatan: 2026, Extremely powerful industrial magnet for iron separation Special price €990 net (Shipping €14.90 net) *You can find the construction lengths in picture 2 The effective surface features a stainless steel end plate (material 1.4301). For installation, there are threaded holes on the rear side. *Handle available upon request The block magnet systems can be used at a maximum operating temperature of up to +100°C. The magnet surface should be cleaned regularly from the collected iron parts. Hedstqfhxjpfx Ad Ror Attraction distances for all types, e.g.: For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, "iron parts jump onto the magnet's gripping surface". Installation example 2: Mounted in a pipeline system with direct contact to the material flow. For high separation reliability, the installation of several block magnets in a cascade arrangement is possible. Installation and safety instructions: When handling, already during unpacking and later during installation, ensure that no loose iron parts, such as tools or screws, are lying nearby. The magnetic force is so strong that painful injuries can occur if fingers are caught between iron parts and the magnet’s active surface. No steel parts should be located within a minimum distance of 400 mm beneath the active surface.

Kondisi: bekas, Tahun pembuatan: 1996, Press capacity 130 t Bending length 3060 mm Hodpfxoxabqbs Ad Rsr Upright distance 2690 mm Throat depth 410 mm Stroke 215 mm Installation height 385 mm Approach speed 200 mm/sec Working speed 1-10 mm/sec Return speed 135 mm/sec Table width 120 mm Table height 1050 mm Tiltable up to +/- 10 mm Operating hours 53,820 h Compressed air 5.0 - 7.0 bar Oil capacity 250 l Operating pressure 340 bar Voltage 400 V Total power requirement 16.0 KVA Machine weight approx. 11,250 kg Dimensions L-W-H 3640 x 2210 x 2375 mm - in inspected condition - Machine video - ?v=23IbxRaZ2KA Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 * swiveling operator panel, front left * 2D graphical programming & product display * Tool & program library * including new TFT-LCD industrial monitor - CNC-controlled axes: Y1 + Y2 / X / R - CNC electro-mechanical / controlled back gauge (X axis) - CNC electro-mechanical / controlled height adjustment (R axis) - Manual adjustment of the 2x back gauge fingers from the front (Z axes) - Manual adjustment of the die shift from the front (I axis) - WILA manual table crowning, incl. analog value display - TRUMPF hydraulic upper tool clamping - TRUMPF manual lower tool clamping - 1x free-moving two-hand / foot control - Rear safety device (sliding door) - Side safety device (swiveling door) - Original operating manual + CE declaration + circuit diagram