4-Achsen-Stabbearbeitungszentrum

Elumatec SBZ 140

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Mesin dalam kondisi sangat baik. Panjang 7,6 meter, memiliki 2 tempat kerja. Garansi hingga 6 bulan dapat diberikan. Kdjdpfx Asyia Ezsl Aet

Tahun pembuatan: 2010, jam operasional: 900 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, PERGERAKAN SUMBU SUMBU X (longitudinal) (mm) 4.300 SUMBU Y (transversal) (mm) 270 Kedjzq Rn Dspfx Al Aodt Meja putar -90°/90° kontinu SPINDEL ELEKTRIK Daya maksimum dalam S1 (kW) 5,5 Kecepatan maksimum (putaran/menit) 20.000 Koneksi alat HSK - 63F MAGAZIN ALAT OTOMATIS Jumlah maksimum alat dalam magasin 8 Diameter maksimum mata pisau yang dapat dimasukkan ke dalam magasin (mm) Ø = 180

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jarak pergerakan sumbu X: 850 mm, jarak gerak sumbu Z: 650 mm, kecepatan spindel (maks.): 24.000 rpm, daya motor spindle: 11.000 W, jumlah sumbu: 4, This 4-axis Elumatec SBZ-140 was manufactured in 2010. With a maximum profile length of 7,600 mm and a Y-axis travel distance of 850 mm, it is suitable for machining aluminium and thin-walled steel profiles. The machine features an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you are looking for high-quality machining capabilities, you should consider the Elumatec SBZ-140 vertical machining centre we are offering for sale. Contact us for further details. Kjdpfx Aljzaq Eis Aedt • Application: Machining of aluminium and thin-walled steel profiles • Operating system: Windows • Machining operations: Milling, drilling, tapping, end machining • Continuous machining range: 0°-180° • Working area: • Max. profile length with end machining: 7,480 mm • Max. profile length without end machining: 7,600 mm • Axis travels: • A-axis rotation: 0°-180° • A-axis programming increment: 0.1° • Axis speeds: • Y-axis: up to 60 m/min • Z-axis: up to 60 m/min • Spindle: air-cooled • Tool magazine: 8 positions, traveling for fast tool changes, expandable system • Machine features: Stationary profile machining, rapid automatic tool changes, suitable for aluminium and thin-walled steel profiles, two machining zones (optional) • Pneumatics: 7 bar required, approx. 180 l/min air consumption (with spray system) • Electrical data: 400 V / 3-phase / 50 Hz, main connection 63 A • Control panel: 15" colour display, USB port, LAN connection Additional equipment • Angle head set (0°, 90°, 180°, 270°) for end machining and twin profiles • Pendulum operation / 2 working zones (optional configuration)

Kondisi: siap digunakan (bekas), Tersedia pusat pemesinan batang CNC 4 sumbu Elumatec. Versi: 6,4m, rentang pergerakan X/Y/Z: 7720mm/845mm/620mm, panjang pemesinan maksimum pada sisi ujung/bukan sisi ujung: 7720mm/7600mm, akurasi pemosisian: +/-0,1mm/m, kecepatan spindel maksimum: 24000 RPM, dudukan alat: HSK-63F, jumlah tempat alat: 8, perangkat penjepit: 8, dimensi mesin X/Y/Z: kira-kira 11250mm/3400mm/2950mm, berat: kira-kira 7400kg, jam operasi menurut sistem perencanaan produksi: kira-kira 42200 jam. Mesin ini tidak memiliki penghitung jam. Dokumentasi tersedia. Pemeriksaan di lokasi dimungkinkan. Kjdsy Aafxepfx Al Ajdt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, SPESIFIKASI LINI Mesin Las 4 Kepala FUSION 4H Unit pelepasan bingkai Modul frais pertama Q-MATIC 1 Koneksi serial antara mesin las dan pembersih Meja pemutar Mesin pembersih elektronik TRIMMER 4A Meja ekstraksi Modul frais kedua Q-MATIC 2 Laptop pengawas lini Kodpfxsy S E E Ns Al Ajdt Unit pemotong sisa Unit pelepasan bingkai otomatis

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang kerja: 7.600 mm, nomor mesin/kendaraan: 1400040505, jumlah sumbu: 4, RINCIAN TEKNIS Panjang pemesinan maksimum dengan pemesinan sisi ujung: 7.600 mm Panjang pemesinan maksimum tanpa pemesinan sisi ujung: 7.720 mm Kdsdpjzhuyfefx Al Aot PERALATAN 12 penjepit pneumatik 2 area kerja Pusat pemesinan profil 4 sumbu; Pemesinan yang dapat disesuaikan secara bertahap antara -90° dan +90° dengan setiap alat yang tersedia Pemosisian penjepit otomatis dengan sistem pengukuran absolut Dua zona pemesinan terpisah untuk operasi bergantian Pengendali 4 sumbu Monitor warna 18,5", koneksi USB, dan koneksi jaringan Sistem operasi Windows Perangkat lunak EluCam Pengukuran panjang profil otomatis (di kedua sisi) Pemindai kode batang Rak alat yang bergerak memastikan waktu penggantian alat yang singkat, sehingga menghasilkan siklus pemesinan yang optimal; Rak dapat diisi dengan delapan alat. 8x dudukan alat dengan penjepit

Tahun pembuatan: 2003, Kondisi: bekas, 4-Achs-Bearbeitungszentrum Kjdpfeuwq S Dsx Al Ajdt

Kondisi: baik (bekas), Tahun pembuatan: 2014, DIP TECH GlassJet NOVO digital printer: Print resolution: 720 dpi Ink colors: black, etch-like, white, and other special colors Maximum glass size: 2200 x 1200 mm (width x height) Minimum glass size: 400 x 400 mm Glass thickness: 2–19 mm Printing speed: up to 30 m²/h (with 8 print heads for one color) Number of operators required: one Overall dimensions: 2,500 x 4,700 x 2,000 mm (width x length x height) Image formats: All common image file formats, including PDF, PS, EPS, TIFF, BMP, JPEG Ambient temperature: 18–25 degrees Celsius Kdodpfeiukuujx Al Aet Power supply: Single-phase 400 VAC x 16 A 50/60 Hz

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 1.280 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.200 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 650 mm, kecepatan spindel (maks.): 24.000 rpm, sudut putar sumbu A (maks.): 180 °, technical-details Ksdpfow Svmisx Al Aedt

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1400040685, Special features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS WATER-COOLED spindle 9.5 kW S1 3-layer machining possible Meticulously cleaned and refurbished – EXCELLENT condition Description: Graphical user interface and graphical service support A-axis for stepless top-side processing – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamp detection and automatic clamp positioning 8 tool positions Complete profile processing with stationary profile bar Rapid base positioning of the machining unit (up to 64 m/min) in the X-axis Robust and low-wear direct drive Protective cover Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color display RJ45 10/100 Mbit network connection Hard drive Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical data: Max. machining length without end-side processing: 7,600 mm Max. machining length with end-side processing: 7,500 mm (tool-dependent) Travel range X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel range Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel range Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis freely programmable in 0.1° steps: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed 24,000 rpm. Max. spindle power: 9.5 kW S1 Kdjdey Ah Tkopfx Al Aet Tool holder: HSK F 63 Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Compressed air connection: >7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A Tool positions for 8 tools Included accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray system Protective cover Front light barrier Side protection fence left and right Central chip extraction 2 pneumatic workpiece stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for a machine of category "L" Data import license package for a machine of category "L" CSV import license for a machine of category "L" Macros hashing license for a machine of category "L" Other information: The machine is handed over ready for transport, incl. transport securing devices, loaded onto truck We also optionally offer the following services upon request: Assembly and commissioning Operator training 4/5-axis machine and eluCad training package

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), A Schüco profile workbench for sash hardware assembly is available. Assembly capacity: approx. 6–8 sashes/day, hardware: Schüco AvanTec, minimum pressure: 0.7 MPa, maximum air flow rate: 20 l/min, machine weight: approx. 1200 kg. An on-site inspection is possible. Kjdpfxjwwlk No Al Asdt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1400040164, panjang benda kerja (maks.): 7.900 mm, kecepatan spindel (maks.): 21.000 rpm, Motor spindle telah dirombak total di pabrik beberapa tahun yang lalu dan sejak itu hanya beroperasi sekitar 100 jam. DETAIL TEKNIS Panjang benda kerja: 7.900 mm Kecepatan putar: 21.000 rpm DETAIL MESIN Ksdpfxjxy Hcio Al Aedt Pneumatik Tekanan: 8 bar Data Listrik Jenis koneksi: 3/PEN Tegangan: 400 V Frekuensi: 50 Hz Arus: 24 A

Tahun pembuatan: 2010, Kondisi: bekas, 4achs-bearbeitungszentrum-mit-8-fach-werkzeugwechsler Kdodpexvp Nksfx Al Ast

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Electronic saw height adjustment Kedpfx Aeuiy Hrsl Aodt Working area, square max.: 170x170 mm Working area, flat max.: 300x150 mm Working area, round max.: 200 mm Saw feed: 0 – 40 mm/s, stepless adjustment Cut length: 5-950 mm (9999 mm with multiple stroke) Feed speed max.: 500 mm/s Weight approx. 1,900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After a comprehensive retrofit, the machine is in like-new condition both technically and visually. Thanks to its features and robust design, it is highly efficient and suitable for a wide range of applications. The programmed HMI control enables easy and highly profitable operation. The soundproof enclosure minimizes noise emissions. The machine is completely overhauled in our facility according to customer requirements. The overhaul includes, among others, the following upgrades: - Conversion to Siemens S7 PLC - Upgrade to Siemens HMI operator interface - Replacement of the ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of wear parts - Refurbishment of the enclosure Additional features: - Soundproof enclosure - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor and wear parts are excluded from the warranty. Options: - Multiple clamping device for parallel sawing of several workpieces - Flat magazine for automatic loading of material up to 6 m in length - Roller conveyors for raw material - Reinforced motor 18.0 kW (frequency controlled) - Delivery and installation at your site - Training for your personnel