Beli Peralatan pembersih mesin & bagian bekas (130)

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, berat kosong: 1.500 kg, berat benda kerja (maks.): 750 kg, nomor mesin/kendaraan: F101, DETAIL TEKNIS Daya pompa: 5,5 kW Daya elemen pemanas: 4,2 kW Beban keranjang putar: maks. 750 kg Koneksi udara tekan: maks. 10 bar DETAIL MESIN Berat kosong: sekitar 1.500 kg Koneksi listrik Tegangan: 400 V Cjdpfoxztt Djx Aarehf Konsumsi arus: 63 A Frekuensi: 50 Hz

Kondisi: bekas, Tahun pembuatan: 2019, Technical Data: Pressure: 1.5 / 0.15 bar / MPs Flow rate: 4,500 l/h Working diameter: 600 mm Usable height: 310 mm Housing/Frame: Stainless steel Codpfx Aaewpq Absrshf Heating power: 4.5 kW Max. temperature: 80°C Adjustable cleaning time: 1 - 30 min Load capacity: 130 kg Connected load: 5.5 kW Tank capacity: 100 l Dimensions (LxWxH), approx.: 1,080 x 1,000 x 1,250 mm Weight, approx.: 165 kg Features: - Fully automatic parts cleaning - Motor-driven turntable - 3-dimensional nozzle system - Operating hours counter - Retaining ring (stainless steel for turntable) - 2 lockable swivel castors - Timer for cleaning cycle - Water level control

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, BVL Surface Technology DAD 2BL (YUKON) Year of manufacture: 2014 Chsdpfxexcun Ej Aarsf For Clean Components On the Production Line Continuous flow cleaning system made from stainless steel with oil separator for uninterrupted material throughput. The workpieces travel continuously, or in cycles as required, through sequential treatment zones. Cleaning is performed via the stationary nozzle systems as the components pass by. Suitable for parts with dimensions approx. 400 x 100 mm A wire loop link conveyor transports parts lying flat or standing upright through the cleaning system. • Surrounding nozzle frame – the staggered arrangement of the nozzles enables all-around cleaning • Separation of treatment zones minimizes cross-contamination • Nozzle frames and nozzles can be adjusted to suit the components • Customization of usable dimensions, load capacities, and pump performance available The process steps are carried out in consecutive treatment zones: • Cleaning by spray process, sequential arrangement of various wet treatment zones (washing, degreasing, phosphating, rinsing, passivating) • Drying Tank Capacities: Washing tank: 800 liters Rinsing tank: 500 liters Heating output: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Washing tank pump: 3.0 kW Rinsing tank pump: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C up to max. 60°C Each machine comes with stainless steel drip trays for spill protection. These are included in the price and supplied with the unit. WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Tahun pembuatan: 2020, Kondisi: baik (bekas), nomor mesin/kendaraan: 054889, aduna-k100-2bad-en Chodpfx Aaoxz S Utjrjf

Tahun pembuatan: 2019, Kondisi: bekas, nomor mesin/kendaraan: IntNr231388, de-en-001 Chsdpfxoxxvrdo Aarof

Tahun pembuatan: 2021, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Automatic KLT container washer, tray washer, continuous tunnel washer for various components - Washing - Rinsing - Degreasing - Drying - 2 lanes - 2 x 600 KLT/hour - External heating - Possible transport, disassembly, and loading Crates, KLT inserts, and lids – continuous tunnel washing system. Maximum passage width: 300 mm Maximum passage height: 650 mm Contamination: Dust, mineral grease, mineral oil, metal chips System Description The installation, including pipework, is constructed from high-quality stainless steel, ensuring a long service life. The machine is a double-lane chain conveyor tunnel washer. The unique modular design allows for extension of an existing system at any time, ensuring that the installation will not become undersized. The system can expand as production requirements increase. Hot water heating: Heat exchangers in the washing basins for the heating circuit. Recommended supply temperature: 90°C Nozzle pipes: Screwed connections Oil separator: Three-phase separator with pneumatic diaphragm pump and pre-filter on all tanks. Part counter on both lanes. System features: • Stainless steel infeed module • Stainless steel wash module 1 • Stainless steel wash module 2 • Stainless steel cold air blow-off • Stainless steel hot air drying module • Stainless steel hot air drying module • Stainless steel outfeed module • Transport system • Continuously variable transport speed drive • Heating: tube heat exchangers in the wash tanks • Control cabinet with electrical control system • Maintenance and cleaning doors on both sides • Thermal insulation for the wash tanks and sound insulation for the fans Technical data: Total dimensions: Length: 12,350 mm Width: 1,950 mm (2 lanes) Height: 2,800 mm (overall height incl. fans) Electrical power - Washing Wash pumps 1 7.50 kW + 7.50 kW Wash pumps 2 7.50 kW + 7.50 kW Cold air blow-off 5.50 kW + 5.50 kW Hot air blow-off 1 2 x ... Chedpfx Aaowi Nl Iorsf Hot air blow-off 2 2 x ... Hot air heater coil 4 x ... Drive motor 0.55 kW + 0.55 kW Exhaust air fan 3.00 kW + 3.00 kW Voltage: 400 V Frequency: 50 Hz Protection class: IP 55 The system control cabinet is positioned next to the machine. The control cabinet contains all components required for the operation and monitoring of the entire system.

Tahun pembuatan: 2024, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, optima_steamer_xd_dampfreiniger_neu_mit_garantie Chedpsh Izgqsfx Aarof

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, BVL Rotocleaner 750 The cleaning and degreasing system with steam extraction fan and oil skimmer is in good used condition. Manufacturer: BVL Oberflächentechnik Year of manufacture: 1996 automatic system with removable rotating basket. Basket washing system Basket diameter: 720 mm (internal diameter) Basket rim height: 140 mm (internal height) Max. usable height (wash load): 450 mm Max. batch weight: 500 kg External dimensions: Width 1190 mm, Depth 1170 mm, Height 1170 mm Weight: 290 kg Operating manual, technical documentation, and CE Declaration of Conformity available. In 2011, the machine underwent a complete overhaul. The gear motor, heating unit, gas pressure spring, and heater were replaced. The housing of the cleaning system and the corresponding piping are made of stainless steel. Very simple operation ensures quick workflow. Cleaning is performed using a special nozzle system with wide jet nozzles in combination with a motor-driven rotating basket. A U-shaped spray system ensures easy operation with high efficiency. The spray supply unit is powered by a high-performance circulation pump which guarantees intensive treatment and is fitted with a mechanical seal made from hard metal. A heated tank at the base of the unit contains the cleaning solution (98% water and 2% cleaning agent). If the bath level drops, a water supply connection ensures automatic refilling. This guarantees safety for the heating elements and pump, as well as clean and precise dosing of the required water volume. Internal return flow baskets filter coarse dirt from the washing solution. A vapor extraction system removes steam before the lid is opened. Single-tank unit Crane loading possible All technical details subject to errors or misprints. Price on request Sale exclusively to EU countries. Chsdpfx Ajwzwfgsarsf

Kondisi: sangat baik (bekas), BIO-CIRCLE Model: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Cleaning System The RWR units from Bio-Circle are the optimal solution for cleaning internal circulation systems without disassembly. The unit is compact, quiet, and very easy to operate. Thanks to the completely closed system, there are no odors from the cleaning agent or contaminated water. External dimensions → approx. 1200 x 800 x 1050 mm Power supply → 400 V 50 Hz plug 16A CEE 5p 6h Draining → 1 1/4“ outlet Technical specifications: Type of contamination: Scale, rust (mineral), oil, grease Number of parts: Single components, small batches, low quantities Component geometry: Entire components (without disassembly) Quality seal: Stainless steel, service package available Chsdpfx Astqfbbsarsf Tank capacity max.: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of cleaning system without tank filling: 180 KG Application: The RWR 80 L KST Fully Automatic PLC was developed for the plastics injection molding sector and can be used anywhere cooling channels (circulation systems, pipelines) need to be cleaned. Operation: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the unit is switched on, the system will begin heating up. During the heating phase, the unit can already be connected to the tool via the two hoses. The 5-stage cleaning program and the flow direction change run automatically once the instructions displayed on the screen are confirmed. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Spray cleaning system Type L102 Basket: Ø 910mm, 2 pumps ✓ Wash cycle timer 0-60 minutes ✓ Integrated control cabinet with indicator lights and operating elements ✓ Gas pressure dampers for lid ✓ System body made of stainless steel 1.4301 Cedpfohp Dvqox Aarehf ✓ Electrically heated, thermostat-controlled 0-60°C ✓ Level control and dry-run protection for the heating element ✓ Circulation pumps with mechanical shaft seals ✓ Basket drive with gear motor ✓ Basket surround Technical Data: - Usable height: 500mm - Basket rim height: 150mm - Load capacity per batch: 200kg - Batches per hour: approx. 2-10 - Overall width (incl. control cabinet): 1,250mm - Overall depth (with lid open): 1,300mm - Overall height (with lid open): 1,990mm - Tank capacity: 175 liters - Spray pressure: 2 x 2.4 bar - Circulation rate: 2 x 110 liters/min - Operating voltage: 400 V/N/PE 50 Hz - Heater: 6.0 kW - Pump output: 2 x 1.0 kW - Rotation drive: 0.18 kW - Total connected load: approx. 8 kW The unit is operational and available for demonstration in our showroom in Stuttgart. Additional operating hours may be accrued. As a partner of Glogar, we offer systems and matching cleaning chemicals. The machine is available for immediate delivery (subject to prior sale). For the state of Baden-Württemberg, we also offer technical services such as maintenance and commissioning. Offer price plus shipping costs.

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), A manual partial cleaning machine D.W. Renzmann for the printing industry with an exhaust air system is available. Useful dimensions X/Y/Z: 1800mm/600mm/300mm, washing pump performance: 5m³/h, internal extraction: 2000m³/h and 1.1kW, dimensions X/Y/Z: approx. 2900mm/1200mm/1800mm. Documentation is available. An on-site inspection is possible. Chedpfx Astul Nvearef

Tahun pembuatan: 2017, Kondisi: bekas, nomor mesin/kendaraan: IntNr231417, Technische Beschreibung – PERO RO Hersteller: PERO AG Modell: RO R1 / 414-EX Baujahr: 2017 / 10 Maschinentyp: Reinigungsanlage / Entfettungsanlage Verfahren: Lösemittelreinigung (z. B. modifizierte Alkohole oder Kohlenwasserstoffe) Technische Daten (typisch für diese Baureihe): Reinigungssystem: Geschlossener Kreislauf, vollautomatisch Arbeitskammergröße: ca. 530 × 320 × 200 mm Max. Chargengewicht: ca. 50 – 80 kg Lösemittel: Modifizierter Alkohol (kohlenwasserstoffbasiert) Trocknung: Vakuumtrocknung Steuerung: SPS-Steuerung mit Touch-Panel Ausstattung: Integrierte Destillationseinheit, Filtersystem, Ölabtrennung Leistungsaufnahme: ca. 10 – 15 kW Vakuumpumpe: Integriert Zustand: Sehr guter, gepflegter Zustand – aus laufender Produktion Besonderheiten: Energiesparendes Reinigungssystem mit geschlossenem Lösemittelkreislauf Hohe Reinigungsqualität bei minimalem Lösemittelverbrauch Ideal für feinmechanische und zerspanende Betriebe Die Maschine kann nach Terminvereinbarung unter Strom besichtigt werden. Cjdsxvy Dxjpfx Aarehf Änderungen und Irrtümer bei den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Cleaning System Type W 60 C Machine body, internal pipework, control cabinet and washing basket made of stainless steel Combination unit - rotary table system with removable turning device and small parts basket - Basket diameter, rotary table washing basket: 600 mm - Usable interior height: 370 mm - Basket load, rotary table washing basket: 100 kg Chsdpfxoq Ewgke Aarsf - Usable interior height: 530 mm - Small parts basket dimensions: 375 x 220 x 200 mm Mesh size: 12 mm - Basket load, small parts basket: 20 kg Fully stainless steel construction Pumps and external pipework/fittings Configured for operation with liquids up to a density of 1.3 via reinforced pump with frequency converter Chip/particle filter with bath cover plate Eco-rinse (loss rinse) for minimal water consumption Water supply via operator's mains with integrated machine-side hot water supply Hot air drying 1 x 4 kW Oil skimmer Drainage system/floor flushing with pump and stainless steel pipework

Tahun pembuatan: 2003, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Industrial washing machine Ipsen W-VCA-17-E(S) -Year of manufacture: 2003 -All documentation and drawings included -In working condition Cedpjupzw Hjfx Aarehf -Weight approx. 7,500 kg

Kondisi: belum diuji (bekas), DÜRR Type: DÜRR 1K Adhesive System Dürr 1K adhesive dispensing system with drum pump, metering unit, and heated hose (approx. 5m). Technical machine description: Chjdpfordyb Asx Aarsf Condition of the system: The drum pump, feed hoses, metering unit, etc. are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: max. 6 bar Dimensions: approx. 1.5 x 1 x 1.5 meters 1 adhesive controller DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data; specifications are subject to confirmation!) If you have further questions, we would be happy to answer them by phone.

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), From our showroom in Stuttgart, we regularly sell our demonstration machines. The equipment has been used for demonstration purposes. Subject to prior sale. Offer plus transport costs. All information without guarantee. Chodogrm Egjpfx Aarof We offer maintenance and service for Glogar cleaning systems. HD Washing Table – HD Brush Washing Table The washing table is equipped with an adjustable 60 bar high-pressure pump, allowing cleaning to be performed within an enclosed working chamber. Cleaning is carried out using an aqueous degreaser at approximately 45°C. Viewing window with lighting included Media filtration via cartridge filter Convenient operation via foot switch Including rotary table Technical Data: Working area: 800 x 600 mm Usable height: 400 mm Load capacity: 50 kg Operating pressure: adjustable up to max. 60 bar Pump capacity: 14 l/min Washing temperature: adjustable up to max. 45°C Tank volume: 100 l Heating power: 3,000 W Total power consumption: 7.0 kW Voltage: 400 V AC 1P+N+PE; Frequency: 50 Hz Machine weight: approx. 140 kg Overall dimensions with lid open: 1,100 x 910 x 2,020 mm

Tahun pembuatan: 2023, jam operasional: 4 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10220, hyCLEANER® red EVO I membersihkan berbagai jenis fasad, permukaan, dan material: sangat lembut, efektif, cepat, dan yang terpenting, ekonomis. Mesin ini bekerja dengan air bertekanan tinggi dan tidak memerlukan sambungan listrik. Kaca dan bingkai dibersihkan secara bersamaan. Semua elemen yang bersentuhan dengan air terbuat dari baja tahan karat. Air murni dapat digunakan, sehingga permukaan kaca mengering tanpa meninggalkan goresan. Keunggulan lain dari hyCLEANER® red EVO I adalah roda berjalan yang tidak meninggalkan bekas pada permukaan fasad – pembersihan yang lembut bisa semudah ini! Chsdpjxnlz Hjfx Aarjf

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 600 mm, masa garansi: 12 bulan, tegangan masuk: 400 V, tinggi total: 1.250 mm, lebar total: 1.000 mm, panjang total: 1.080 mm, tingkat kebisingan: 65 dB, We offer the PC 60/130 T Parts Washer for sale Catalogue No.: 1.626-704.0 Year of Manufacture: 2016 A 12-month WARRANTY applies to all devices purchased from us. Equipment: • Hour meter • Stainless steel safety grate • Swivel castors, 2 lockable • Timer switch • Water level control Technical data: • Pressure: 1.5 / 0.15 bar / MPa • Pump capacity: 4500 l/h • Connected load: 5.5 kW • Working diameter: 600 mm • Working height: 310 mm Cjdpfjwzwuzsx Aarohf • Housing/frame: Stainless steel (1.4301) • CE tested • Heater output: 4.5 kW • Max temperature: 80 °C • Adjustable washing time: 1 / 30 min • Load capacity: 130 kg • Sound pressure level: 65 dB(A) • Tank capacity: 100 l • Number of phases: 3 Ph • Frequency: 50 Hz • Voltage: 400 V • Dimensions (L x W x H): 1080 x 1000 x 1250 mm The washing process is fully automated, featuring an intuitive control panel and indicator lights displaying all operating stages. The washing fluid temperature is maintained between 35 and 80°C via a thermostat. Thanks to specially profiled housing (mechanical labyrinth seals), the PC 60/130 T dispenses with short-lived rubber seals. Gas spring struts fitted with dampers ensure effortless lid opening, and a ball valve simplifies draining of the washing liquid. The Kärcher parts washer operates in a closed-loop system (using an electric pump) with a water-based cleaning solution, rather than solvents, so operators are not exposed to hazardous fumes.

Jam operasional: 8.250 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 102172, Perfect for cleaning small components made of steel, stainless steel, aluminium, etc. "CeBeCo" spray washing machine with Rhönrad T R O W A M A T type "XL", size 40100/40 WST (completely overhauled in 2020) – loading table with rollers included for free ===== – with 6-nozzle spray system – Cjdpfxewm Ap Uj Aarehf with direct electric heating, with digital thermostat display, with insulated heating zone, with Rhönrad, with hinged door, with steam extraction, with submersible pump, with coarse filter basket, with level monitoring, with drying system, with control cabinet, with crane lugs, with adjustable feet, with external paint finish. TECHNICAL DATA: ===== Rhönrad internal dimensions: approx. 1,020 x 400 x 400 mm (H) designed for * one large basket: external dimensions approx. 1,000 x 400 x 400 mm (H) * two standard baskets (with adapter): external dimensions approx. 470 x 370 x 240 mm (H) Load capacity: max. 100 kg with evenly distributed load Filling volume cleaning agent: approx. 400 l Power requirement heater: approx. 18 kW Power requirement pump: approx. 5.5 kW Filling volume rinsing agent: approx. 250 l Power requirement heater: approx. 12 kW Power requirement pump: approx. 3 kW Bag microfilter: fineness 50 µm Thermostat: digital Insulation: approx. 25 mm Cladding: galvanized steel sheet Power requirement extraction: approx. 0.25 kW Power requirement drive: approx. 0.25 kW Power requirement hot air: approx. 3 x 4.4 kW Power requirement blower: approx. 2.3 kW Power requirement for drain and recirculation function: approx. 0.45 kW Compressed air: min. 6 bar, ½” supply line Voltage: 230/400 V, 50 Hz Control voltage: 24 V Controller: Siemens with panel Overall dimensions: approx. 2,740 x 2,255 mm Loading height: approx. 1,240 mm Total height: approx. 2,550 mm Labelling: German

Tahun pembuatan: 2005, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6535, Sistem pelarut vakum penuh Chedpfxoxf Dv Dj Aarsf Direvisi Siap kirim segera

Tahun pembuatan: 2007, Kondisi: bekas, TS240604-1 Cjdpsxukp Nsfx Aarjhf

Tahun pembuatan: 2014, Kondisi: bekas, Containerised Tank Cleaning Station JetPetroClean Manufacturer: OU Dontal, Estonia The installation is designed for cleaning the interior of tanks that previously contained petroleum products, specifically railway tank cars. The cleaning process is carried out in a closed loop system, using hot water or hot water with detergents. Cleaning is performed by introducing a washing head through the tank’s top manhole, then washing the interior at a specified pressure. Dirty water is drained through the tank’s bottom outlets using diaphragm pumps into a container tank. After contaminants are separated, the water is returned to the cycle and reused for further washing. Cleaning a single tank car takes approximately 1 hour. The next step is drying the tank interior and removing solid waste from inside the tank using extraction fans. After washing is complete, the installation is purged and dried with compressors. 1. Main Container Unit: - 20-foot container – year of manufacture: 2014 - Two Lowara main pumps – year of manufacture: 2014 - Hydraulics system with pressure gauges - Wash water tank (wash water tank 5,770 L, waste tank 2,540 L) - Control cabinet - Compressed air tank 2. Auxiliary Unit: - 20-foot container – year of manufacture: 2012 - Two GD ESM 11-7.5A compressors – year of manufacture: 2013 - Gas generator – year of manufacture: 2015 - Control cabinet - Meganex 15 kW electric heaters – year of manufacture: 2014 - Four Soler&Palau CBRT/2-502 5.5 kW fans – year of manufacture: 2014 - Two diaphragm pumps - Compressed air tank 3. Waste tank in container setup 4. Rigid steel piping and flexible plastic hoses 5. Structures, platforms, stairs and railings for tank service 6. Washing heads, elbows, valves and other hydraulic system components Technical condition: used installation, requires technical inspection before recommissioning. Codpshgimdsfx Aarjhf

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 14.441 h, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.450 mm, lebar total: 1.850 mm, panjang total: 4.300 mm, Currently in stock. Available immediately. The unit has been completely overhauled as of 22.01.2025. Chodpfx Aaovb Hpvsrsf

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, suhu: 60 °C, kapasitas angkut: 250 kg, SUMMA DC3/OSK rotary basket – rotary drum cleaning system, carousel degreasing unit with dryer The chamber rotation machine from the Czech manufacturer operates on a pressure spray principle. The degreasing system offers three surface cleaning combinations and is suitable for surface degreasing of a wide variety of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770 x 500 mm Max. workpiece weight: 250 kg Electrical power: 23 kW Bath temperature: max. 60 °C Air temperature: max. 120 °C Bath heating (rinsing): 12/6 kW Cedpfx Aaewty H Dsrjhf Hot air drying: 13.5 kW Aerosol pressure: 0.28 MPa Pump capacity: 70 litres/minute Machine weight: 520 kg Machine dimensions: 1800 x 1800 mm Height: 1500 mm Do you need further information? We are happy to assist you! Please contact us via the contact form or give us a call. This listing was automatically translated. Translation errors may be possible.

Tahun pembuatan: 2009, Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Function Easy handling thanks to a fully automatic cleaning process, allowing skilled staff to focus on other important tasks. The wash tank is filled with a mixture of water and IBS special water-soluble cleaning agent (washing solution). The contaminated components to be cleaned are placed in the rotating wash basket, and the lid is closed. After selecting the desired washing temperature and duration, the machine is switched on, and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump assemblies draw the washing solution from the tank and deliver it through 6 stainless steel jet pipes equipped with overlapping flat jet nozzles. While rotating evenly, the motor-driven basket ensures that the components are thoroughly sprayed with hot washing solution from all sides. After the cleaning process is complete, the unit shuts off automatically. Advantages - 2 horizontally arranged pumps - 6 three-dimensional jet pipes made of stainless steel - Robust stainless steel construction - Additional fine parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Vapor extraction system - Stainless steel perforated plate with filter basket above the wash tank - Suction filter in front of the pump chamber - Low-water protection - Individually height-adjustable feet Chedpfxjhctwwe Aaref Technical Data Immersion tank / basket capacity: 280 l Diameter of immersion tank / basket: 1150 mm Load capacity: 350 kg / optionally 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Spray output: 2x10800 l/h Pump flow pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A