Pusat permesinan profil Elumatec 150

Elumatec SBZ 150

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1500050285, jarak pergerakan sumbu X: 7.800 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 630 mm, kecepatan spindel (maks.): 24.000 rpm, jumlah slot dalam magazin alat: 14, translation_01 Kfjdpfx Aexx Uf Nsahsa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 1.395 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1400040877, - 4-axis (X, Y, Z, A) machining center Kfedpfx Aasuc U S Nohea - Designed for economical and efficient processing of aluminum profiles and thin-walled steel profiles - Version equipped with an air-cooled milling spindle - All machining operations such as milling, drilling, and tapping are performed on a stationary profile - Smooth processing using all tools - Synchronous tool magazine ensures short tool change times, resulting in optimized machining cycles - Magazine can be equipped with up to eight tools - Windows operating system - Machine equipped with eluCam software - Maximum machining field length with end machining: 4200 mm - Maximum machining field length without end machining: 4320 mm - Automatic length measurement on both sides - Barcode reader - Stationary tool magazine (8 slots)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1500050123, kecepatan rotasi (maks.): 18.000 rpm, panjang kerja: 12.000 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Kecepatan maks: 18.000 rpm Panjang pemrosesan: 12 m Chuck pneumatik: 20 buah DETAIL MESIN Data listrik Tegangan: 400 V Fase: 3 ~ Kedpfx Aaexnz Ivohsfa Frekuensi: 50 Hz Konsumsi arus: 76 A Tekanan kerja: sekitar 8 bar PERLENGKAPAN Pengganti alat otomatis Kepala sudut

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1500050209, panjang batang: 12.000 mm, Pusat pemesinan batang dibeli pada tahun 2022 dalam rangka pengambilalihan sebagian unit usaha. Untuk pembelian ini, penilaian dilakukan oleh pemilik asli. (Penilaian terlampir) Kfedpfx Aasxlq Rbehea Mesin hampir tidak digunakan dalam tiga tahun terakhir karena kami masih memiliki 2 pusat pemesinan lainnya. Pusat pemesinan batang ex works (dapat dibongkar dan diambil kapan saja)

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), A Weinig angle line for window and door production is available. Maximum tool outside diameter: 320 mm, maximum tool cutting circle: 232 mm, mortising spindle length: 640 mm, profiling and co-directional play length: 285 mm to 320 mm, control system: Siemens WS400. Includes complete tooling set and sash window equipment. Documentation available. Kfsdpfxetq U A Io Aahsa

Tahun pembuatan: 2001, Kondisi: bekas, Images to follow – machine is currently undergoing overhaul. Technical specifications: Ksdst Ea Tfspfx Aahefa - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0–90°, freely programmable - C-axis swivel angle: 0–355°, freely programmable - Max. machining length without end-face machining: 7,300 mm - Max. machining length with end-face machining: 6,980 mm - Tool changer with 10 positions, plus one saw blade holder - 9 material clamps - Tool holder SK30 - 2-layer machining

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, elumatec SBZ150 Profile Machining Center 6.0m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter with 50 mm diameter, angle head or special milling cutter with max. 100 mm diameter); six-sided machining; underside processing with angle head (option); Fast positioning (up to 60 m/min) of the machining unit along the X-axis; low-wear direct drive; with automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; equipped as standard with automatic central lubrication system; Rigid machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row circulating roller units and linear guides. 5-axis industrial PC control, including Ksdpfx Ajw A Rv Ioahofa 3 axes as path control; high-dynamic three-phase servo drives with resolver and digital servo controller; freely programmable swivel angles for the A and C axes; With color display and floppy disk drive; Storage capacity for over 200,000 sets; 3 serial and 1 parallel interface for online connection; barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ45 connection (network connection must be provided by the customer's administrator) Analog modem (customer must provide an analog phone line) Technical Data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable For further details on the milling area, see drawing no. 150 05 17 08 Max. machining length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling Spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper size Included Accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamps Tool setting gauge Front light barrier Saw blade DM400 with holder Angle milling head Important: The profile machining center is equipped as standard with front light barriers for safety. For additional lateral and rear safety, on-site measures are required, or please inquire about our safety fence solutions. Incl. Angle milling head for underside machining

Tahun pembuatan: 1992, Kondisi: baik (bekas),

Tahun pembuatan: 2018, Kondisi: seperti baru (mesin pameran), Mitre saw with a blade diameter of 600 mm (optionally 800 mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (clamping cylinders’ height and inclination angle continuously adjustable) - Two-hand safety control Optional features: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Automated saw version - Pre-load magazine - Horizontal clamping device - Extraction system - Further accessories available on request Kfedpfxod Rhzws Aahoa We would be pleased to provide you with a quotation tailored to your specific requirements. The machine can be inspected and tested at 56812.

Kondisi: baru, Sheet thickness 2.5 mm Roll diameter 98 mm Throat depth 160 mm Total power requirement 1.5 kW Machine weight approx. 0.35 t Space requirement approx. 550x1400x1500 mm Kjdofv H Ehspfx Aahofa Supplied with: • Manual version • 4 sets of rolls • Foot pedal control • Brake motor • Emergency stop