Mesin hobbing roda gigi

EMAG Koepfer K200

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Hnsdpfxevgxfyj Aa Nsg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant supply through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, jam operasional: 36 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1024-54, Made in Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic increment: 1 mm Feed rate: 100–3500 mm/min Reversal delay: 0–5 sec. Max table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Hnjdpfx Aaew T Sc No Njg Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350x32x127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual traverse: 120 mm Swivel angle (right): 15° + 30° Optional wheelset guard for max wheel width: 50 mm WORKPIECE SPINDLE (WORKHEAD): Swivel range: 0° – 90° Speeds (nw): 80/175/380/800 rpm Internal taper: Morse 4 Collets: W-20 Drive power: 0.5 kW Max workpiece weight: 20 kg Max load during between-centres grinding: 12 Nm Option – infinitely variable speed range I: 30–300 rpm Option – infinitely variable speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill stroke: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm / measured over 400 mm: 0.002 mm Between centres: 650 mm / measured over 650 mm: 0.003 mm Roundness accuracy for between-centres grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permitted voltage variations: -15% to +10% Permitted frequency variations: +/- 3% Compressed air: 5 bar The above technical data are given without obligation and subject to errors or omissions.

Tahun pembuatan: 2021, Kondisi: baru, Type: gas-fired with central recuperator Hedpsg E S Inofx Aa Njng Max. temperature: 1,300°C Max. furnace capacity: approx. 700 kg/h Clear door opening (W x H): 600 x 400 mm Number of burners: 6 Number of control zones: 3 Heating capacity: 720 kW Total electrical connected load: approx. 15 kVA PLC: Siemens S7

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Hnjdpfx Aaouxfuco Nog Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: sangat baik (bekas), Complete Desktop Metal 3D Printer System Here we offer you a complete Desktop Metal 3D printer system. Desktop Metal 3D Printer Studio System Complete system: 3D printer + debinding machine + sintering furnace Manufacturer: Desktop Metal The three-part solution comprises a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: - Printed materials: Metal - Technology: FDM - Application: Industrial - Other features: Office-compatible - X-axis travel: 30 cm (12 in) - Y-axis travel: 20 cm (8 in) - Z-axis travel: 20 cm (8 in) Hnsdpfxjk Hz Nqj Aa Nsg Description: Unlike laser-based systems that selectively melt metal powders, this printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements commonly associated with metal 3D printing and enables new features such as the use of closed-cell infill for lightweight, strong parts. 1.2 Desktop Metal Studio Debinder (Debinding Machine) - Fully automatic debinding - Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic fluid distillation and recycling means no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace - Hybrid technology (microwave & conventional heating elements) - Build volume: 305x205x205 mm - Carbon steel housing - Gas supply: 2 x 900 L gas cylinders - Heating power: 20 kW Features: - Function: Sintering - Configuration: Chamber - Heat source: Gas - Other features: High-temperature, automatic - Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace delivers industry-grade sintering in a package suitable for office environments. Built-in, material- and build-specific temperature profiles ensure uniform heating and cooling, avoiding residual stresses typical of laser-based systems. Condition: used / gebraucht Scope of delivery: (see picture) (Subject to modifications and errors in technical data, specifications are subject to change!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 5.650 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS bar feeder Fanuc 31iB - 5,646 operating hours Country of manufacture: CH Voltage: 400V Dimensions: 2135x1250x2114 mm Net weight: 2,700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Maximum bar diameter: 16 mm Maximum machining length: 180 mm Spindle speeds: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub spindle Maximum bar diameter: 16 mm Spindle speeds: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool Station 1 Number of positions: 5 Number of driven positions: 3 Driven tool speed: 8,000 rpm Tool Station 2 Hnsdpfx Aekhnqgea Nsg Number of positions: 5 Number of driven positions: 3 Driven tool speed: 8,000 rpm Endworking Unit Number of positions: 4 Number of driven positions: 3 Driven tool speed: 8,000 rpm Backworking Number of positions: 6 Number of driven positions: 6 Driven tool speed: 8,000 rpm Electrical supply Line voltage: 400V Technical data is provided without obligation; errors and omissions excepted.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Mountable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Cutter head mounting plate diameter (Ø) 360 mm Mounting taper nominal diameter for cutter heads Ø 58.227 mm Travel distance - Z axis 200 mm Recording diagram magnification ±10 - ±500 µm Machine weight approx. 2.3 t Required space approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gearing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved with precisely set cutter heads. The Oerlikon cutter head setting and testing device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measurement process on the CNC-controlled inspection device is semi-automated: The respective actions required for the process are clearly displayed on the screen via operator guidance. The positioning of the individual cutters in the cutter head and the height of the cutter tips is performed largely automatically via a special process and is simultaneously documented in a run-out diagram. A subsequent measurement process checks the radial position of the inner and outer cutting edges of all cutters in the cutter head. If certain test parameters of the cutters do not comply with tolerance specifications, they can be individually re-positioned. Through the combination of a semi-automated adjustment process, operator-guided setup actions, and an automatic measuring process, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and inspection process - Graphical display of the cutter head configuration and measurement results with tolerance check - Plain-language instructions for the operator (no encoded information) - Easy allocation of measurement results to individual cutters - Documentation of setting and measurement results via printer Hjdpfxjul Efms Aa Neng - Setting and inspection procedure suitable for blade-type cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Kondisi: bekas, Tahun pembuatan: 2008, de2specs Hedpfx Aovxww Soa Njng

Kondisi: bekas, Technical details: Max. balancing weight: 800 kg Balancing body diameter: 1250 mm Balancing speed: 190 - 3600 rpm Bed length: 2600 mm Voltage: 380 V/Hz Drive power: 7.5 kW Machine weight approx.: 1.5 t Machine dimensions approx. LxWxH: 3.5 x 1.7 x 2.0 m Control cabinet dimensions: W: 650 x D: 250 x H: 800 mm Horizontal balancing machine The balancing machine is designed for measuring and correcting static and dynamic imbalance of rotors. Maximum balancing weight: 800 kg with equal load distribution, i.e., 400 kg per bearing pedestal Hodpsu Upp Tsfx Aa Njng Power transmission via cardan shaft Bearing journal diameter min./max.: 16–95 / 95–180 mm Bearing distance (center to center) min. 125 mm and max. 2070 mm from shaft end to bearing center Measuring speeds: 1st gear = 190 – 650 rpm 2nd gear = 400 – 1250 rpm 3rd gear = 700 – 2100 rpm 4th gear = 1200 – 3600 rpm 2 mounting pedestals, manually repositioned along the entire bed Schenk measuring device with digital display Various accessories included, e.g., multiple rotor shafts with different diameters and various rotor mountings—please enquire! i.D.

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), Translation: Hsdorgahxepfx Aa Nsng Centre distance: 400–800 mm, Spindle speed: 1000–2700 rpm, Workpiece diameter: 10–300 mm, Grinding wheel diameter: 40–300 mm, Swivel angle: -45 to +45°, Length: 3000 mm, Width: 2500 mm, Height: 2275 mm; equipped with Hoffmann oil mist separator (new filter cartridges), Faudi gravity band filter unit, hydraulic power unit, additional grinding head for grinding worm gears, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, electrical diagrams in paper format. Inspection possible.