Pusat putaran spindel tunggal vertikal
EMAG VL 400 (Siemens)

Name: EMAG VL 400 (Siemens)
Brand: EMAG
Availability: InStock

Tahun pembuatan

2021

Kondisi

Bekas

Lokasi

Jerman

Pusat putaran spindel tunggal vertikal EMAG VL 400 (Siemens)

Tampilkan peta

Data mesin

Nama mesin:: Pusat putaran spindel tunggal vertikal

Pabrikan:: EMAG

Model:: VL 400 (Siemens)

Tahun pembuatan:: 2021

Kondisi:: sangat baik (bekas)

Harga & Lokasi

Lokasi:: Bayern, Deutschland

Hubungi

Rincian penawaran

ID iklan:: A18278996

Nomor referensi:: R2033

Pembaruan:: terakhir pada 16.12.2025

Deskripsi

Vertical Single-Spindle Turning Center / Vertical Turning Machine
Manufacturer: EMAG
Model: VL 400 (Siemens)
Year of manufacture: 2021
Operating hours: approx. 1,848

Turret base unit and Y-axis slide unit

High-power turret drive unit for driven tools (C442)
with internal coolant supply to the tool
Max. speed: 6,000 rpm
Corner speed: 3,200 rpm
Tool carrier unit for driven tools: 12 x BMT75

Circulating workpiece transport system, O-version
Drag frame system for 10 workpieces
Workpiece height (including workpiece pallet): max. 300 mm
Workpiece weight: max. 60 kg

Set (10 pieces) drag frames for O-conveyor belt
for workpiece diameter: 150 - 400 mm

Blow-off for workpiece and clamping device (Pick-Up)

Coolant supply: 15 bar
Coolant pump delivery rate approx. 80 l/min at 15 bar
Cooling unit (6.5 kW, water-air)
A cooling unit (with 2-circuit technology) regulates the machine’s thermal management.
Spindle drive, electrical cabinet, and turret are kept at ambient temperature (10°C – 40°C).

Coolant dual filter, manually switchable
Filtration fineness 100 μm, with electrical and mechanical contamination indicator

Chip conveyor
Hinged belt type: to the rear
Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l)

Emulsion mist extraction: extraction capacity approx. 800 m³/h
Rinse gun

Workpiece measurement with measurement probe
Blow-off measurement probe
Tool life monitoring (sister tool management)

Tool breakage monitoring TOOLINSPECT MCU-EUROPA
(SIEMENS 840Dsl, FANUC 31i/32i)

3-color signal tower

Axial drilling/milling head – BMT75 CC
5x angular drilling/milling head 90° – BMT75 CC (i=1:1)
Set of tools for OP10 + OP20

Hydraulic power chuck cylinder Gr.150 – with 1 media passage
Max. traction force 10,850 daN at 70 bar

Coolant through the spindle
Programmable clamping pressure adjustment

3-jaw power chuck KNCS-N 500-155 quick-change
max. = 2,200 rpm (per DIN 6386 rated speed)
Set of hard base jaws
Set of soft top jaws

Attachments for KNCS-N 500-155
Flushing nozzle in chuck bore

Additional tool holders with tools:
1x 8.BMT25VL8IKX50 finishing external turning tool
1x 8.BMT25VL8IKX50 roughing external turning tool
1x 60.7516VL8IKDI15 engraving tool
1x 60.7516VL8IKDI15 tap holder
Ijdpfxjvq Iwyo Aa Neal
1x 40.75V5KRVL8IKD face milling cutter 50mm
3x 80.75V5VL8IKD boring bar holder
2x 27.V520HYDL26 drill diameter 20mm
1x 42.V522L08Ik drill diameter 22mm
1x 27.V514WNL31 drill diameter 14mm

Software package
Operating instructions / Maintenance manual
161225ä

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terakhir online: minggu lalu

Terdaftar sejak: 2003

136 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 7022 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Pusat penggilingan balik CNC Mazak Integrex 300 SY

Schwabach

11.015 km

Pusat penggilingan balik CNC
MazakIntegrex 300 SY

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 10.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.105 mm, diameter pembubutan: 610 mm, kecepatan spindel (maks.): 3.500 rpm, lubang spindel: 70 mm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 210 mm, jarak gerak sumbu Z: 1.137 mm, diameter pemasangan: 63 mm, kecepatan rotasi (maks.): 6.000 rpm, jenis arus masuk: AC (pendingin udara), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The machine is in good condition. Major maintenance work carried out in recent years: 30.04.2020 Spindle overhaul CHF 35,000 16.07.2021 Software update (Wenk AG) CHF 1,600 20.06.2022 Central lubrication pump replaced CHF 400 (All prices quoted in CHF) Known defects: · Error message during startup · Coolant leaks at the rear of the milling spindle during internal cooling · Overload warning when machine is cold and at 100% rapid traverse · Over 150 assorted tool holders included · Spare tool magazine bushings · Spare limit switches for tool changer position monitoring · 2 pcs. 3-jaw chucks, diameter 250 mm (mounted for inspection) · 1 pc. 3-jaw chuck, diameter 250 mm · 1 pc. 3-jaw chuck, diameter 300 mm · 1 pc. 4-jaw chuck, diameter 400 mm Iaedpfxexp Hmae Aa Nsl · 2 sets of hard jaws for external clamping, short version · 1 set of hard jaws for external clamping, long version · Various used sets of soft jaws · Replacement filters for Kowap high-pressure unit (5 in stock, approx. 2 at delivery – each filter approx. CHF 20–25) · Coolant cleaning unit or oil separator (custom-built) · Cabinet adapted to fit the tool magazine for KM63 holders, numbered with 80 slots · Specific clamping accessories suitable for KM63 holders, featuring direct indexable insert clamping · Iscar disc milling cutter suitable for one holder, D160mm width 4mm · Gear milling cutter suitable for one holder (custom-built – for soft jaws, p=1.5mm) · Cleaning/deburring brush suitable for one holder We are happy to provide you with leasing and financing options for this machine. An inspection appointment can be arranged by request.

Lihat detail

Iklan kecil

Jerman

11.023 km

Pusat permesinan CNC
MazakFH 6800

Hubungi

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Translation into English: Iodpfxevnd Sus Aa Nsal Travel range X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool stations: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Including 2-pallet changer for 630mm/630mm pallets. Documentation available. An on-site inspection is possible.

Lihat detail

Iklan kecil

Mesin meninju otomatis Haulick+Roos RSH 500-1250

Neunkirchen am Brand

10.999 km

Mesin meninju otomatis
Haulick+RoosRSH 500-1250

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2004, Kommission Nr.: Lg 34522 High-Performance Automatic Punch Press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of manufacture: 2004 (without soundproof enclosure) Equipped with: Ijdpfx Aoip Uqmea Noal - Infinitely variable drive - 2-connecting rod mechanism - Pneumatic clutch-brake combination - Stroke adjustment - Siemens PC 670 display control - Oil circulation lubrication Technical Data Press force (max.): 500 kN Stroke rate: 30 to 900 strokes/min Stroke: 12 to 60 mm Shut height (max, stroke at BDC): 320 mm Upright clearance: 1,250 mm Table area: 1,250 x 730 mm Passage opening in table: 1,160 x 140 mm Ram area: 1,250 x 450 mm Ram adjustment: 60 mm Drive power: 26 kW Weight: approx. 11,000 kg Dimensions (L x W x H): approx. 2,800 x 1,300 x 3,250 mm Equipment and Accessories: Servo Roll Feed VAMCO SP 150 year of manufacture: 2014 Passage width: max. 150 mm Material thickness: max. 3.0 mm

Lihat detail

Iklan kecil

Dortmund

11.220 km

Tungku perapian putar
VEI

Hubungi

Tahun pembuatan: 2021, Kondisi: baru, Type: gas-fired with central recuperator Max. temperature: 1,300°C Max. furnace capacity: approx. 700 kg/h Clear door opening (W x H): 600 x 400 mm Number of burners: 6 Ijdpfeg E S Inex Aa Neal Number of control zones: 3 Heating capacity: 720 kW Total electrical connected load: approx. 15 kVA PLC: Siemens S7

Lihat detail

Iklan kecil

Mesin bor lubang dalam CNC Auerbach IA3 TLF-U

Heilbronn

11.154 km

Mesin bor lubang dalam CNC
AuerbachIA3 TLF-U

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 1.150 mm, berat keseluruhan: 12.000 kg, diameter bor: 32 mm, Heidenhain iTNC530 CNC control system 12-position tool changer Technical data / details: Travels: X-axis (table, longitudinal): 1800 mm Z-axis (column, cross): 1700 mm W-axis (drilling unit, cross): 1150 mm Y-axis (drilling unit, vertical): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25 to +15° Ijdpjwcldasfx Aa Njal Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Machine weight approx.: 12,000 kg Technical data, accessories, and machine description are non-binding. For further technical details, see photos.

Lihat detail

Iklan kecil

Printer 3D + mesin debinding dll Desktop Metal 3D-Metalldrucker-Studiosystem

Borken

11.250 km

Printer 3D + mesin debinding dll
Desktop Metal3D-Metalldrucker-Studiosystem

€50.000

harga tetap ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), Complete Desktop Metal 3D Printer System Here we offer you a complete Desktop Metal 3D printer system. Desktop Metal 3D Printer Studio System Complete system: 3D printer + debinding machine + sintering furnace Manufacturer: Desktop Metal The three-part solution comprises a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Condition: Used (Good) Iedpfxjk Hz Nqj Aa Nsal Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: - Printed materials: Metal - Technology: FDM - Application: Industrial - Other features: Office-compatible - X-axis travel: 30 cm (12 in) - Y-axis travel: 20 cm (8 in) - Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, this printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements commonly associated with metal 3D printing and enables new features such as the use of closed-cell infill for lightweight, strong parts. 1.2 Desktop Metal Studio Debinder (Debinding Machine) - Fully automatic debinding - Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic fluid distillation and recycling means no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace - Hybrid technology (microwave & conventional heating elements) - Build volume: 305x205x205 mm - Carbon steel housing - Gas supply: 2 x 900 L gas cylinders - Heating power: 20 kW Features: - Function: Sintering - Configuration: Chamber - Heat source: Gas - Other features: High-temperature, automatic - Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace delivers industry-grade sintering in a package suitable for office environments. Built-in, material- and build-specific temperature profiles ensure uniform heating and cooling, avoiding residual stresses typical of laser-based systems. Condition: used / gebraucht Scope of delivery: (see picture) (Subject to modifications and errors in technical data, specifications are subject to change!) If you have further questions, we are happy to answer them by phone.

Lihat detail

Iklan kecil

Pusat pembubutan dan penggilingan CNC Mori Seiki, DMG NLX 2500SY/700

Jakling

10.774 km

Pusat pembubutan dan penggilingan CNC
Mori Seiki, DMGNLX 2500SY/700

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, jam operasional: 9.080 h, Fungsionalitas: berfungsi sepenuhnya, For sale: Well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control system! Only approx. 9,000 machining hours! Traverse paths: X-axis: 260 mm Y-axis: 100 mm Iasdjxzqhrepfx Aa Nol Z-axis: 795 mm Features and accessories: - Tool turret: 12 positions, all driven - Max. speed of driven tools: 10,000 rpm - Parts catcher - Electrical main connection: 400 V - Power consumption: 37.6 KVA - Internal coolant system - Main spindle chuck: Kitagawa BB210AB - Sub spindle chuck: Kitagawa B206A521F - Turning diameter: 366 mm - Turning length: 705 mm - Hollow spindle: 80 mm - Main spindle max. speed: 4,000 rpm, with three-jaw chuck - Power: 18.5 kW - Sub spindle max. speed: 6,000 rpm, with three-jaw chuck - Chip conveyor - In-process tool measurement - Manually installable measuring arm for sub spindle - Short bar loader, manufacturer: LNS - Incl. tooling: 8 fixed tools, 3 driven tools - Incl. extraction system, make: Indusa - Including complete documentation Machine available immediately! Machine is fully cleaned and inspected! Loading by us! Transport can be organized upon request!

Lihat detail

Iklan kecil

BUBUT CNC SCHIESS vertical lathe CNC 25 DSC 200P palettisé 2500mm

Prancis

11.734 km

BUBUT CNC
SCHIESS vertical lathe CNC25 DSC 200P palettisé 2500mm

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Schiess CNC vertical lathe dengan sumbu C, tahun 1992, retrofit tahun 2012 CNC NUM 1060 FLEXIUM 2 meja, diameter meja 2000mm – diameter putar maksimum 2500mm – kecepatan maksimum meja 201 rpm – daya meja 56 KW beban (termasuk meja) 16.000kg crossrail bergerak, 12 posisi: pitch 50mm ruang di bawah hidung spindle min. 795mm maks. 1345mm RAM Z stroke 1000mm sumbu C 360.000 posisi – spindle milling kecepatan maksimum 1600rpm – daya spindle milling 22KW – jumlah gigi 2 Magasin alat: alat turning 20 posisi – alat milling 35 posisi 1 kepala milling WIDAFLEX UTS80 1 kepala milling ISO 50 Iaedpfx Aaoxpqm Re Nol Probe sentuh Renishaw MP 60 (untuk komponen) pengukur alat – Fungsi Transmit: G20/G21 – TANPA rigid tapping konveyor serpihan Pintu depan: buka sebagian M0 / BUKA PENUH

Lihat detail

Iklan kecil

Pemisah kabut minyak ISI Gruppe - RON 60 STR - 350 m³/h – 230 V

Buchholz

11.243 km

Pemisah kabut minyak
ISI Gruppe -RON 60 STR - 350 m³/h – 230 V

Hubungi

Kondisi: baru, Extraction performance at nozzle* (filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or custom colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine work areas | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC included as standard (digital filter control) - Electronically controlled EC fan included as standard - Adjustable fan speed and air volume - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of airflow capacities available - Can be adapted to pollutant load and airflow requirements - Extensive range of mounting and connection accessories Iajdpfxeh Rdwxo Aa Nel - Quality Made in Germany The ELBARON® filter series has been developed for use in machining processes with pure oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are used worldwide. Our filter units are already digitally equipped as standard and can, for example, be controlled via laptop. The ELBARON® device series comprises 18 variants and can be optimally configured in size and performance for your specific application. ELBARON® devices stand out for their long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve optimal filtration efficiency, maximum service life, and trouble-free operation while maintaining economic efficiency.

Lihat detail

Iklan kecil

Pusat permesinan universal Mikron HPM 450 U WPC

Kraichtal

11.185 km

Pusat permesinan universal
MikronHPM 450 U WPC

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Mikron / GF HPM 450 U WPC with Pallet Changer About the Machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, comprehensive equipment! Very low spindle hours! Technical Data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45 / -120 ° - C-axis: 360 ° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of tool magazine positions: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec - Feed force X-Y-Z: 5 kN - Rapid traverse X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Equipment: - 7 pallets, of which 6 with clamping devices (see photo) - Electronic handwheel - Infrared measuring probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-position pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction Iodpfx Asx Hx Rhja Njal - Tool blow-off device - Blow air at spindle carriage - Blow air through spindle center - Internal coolant supply 18 - 70 bar - Paper band filter unit - Chip conveyor - Spindle oil cooler Dimensions (L x W x H): 6600 x 4000 x 2800 mm Weight approx. 8,600 kg Inspection / test under power on site is of course possible. We are not your average machine dealer -> Here you are advised by CNC experts! We are pleased to offer you transport, moving, installation, commissioning, and training for the machine — all with our own technicians. All from one source: We, Baumgärtner CNC GmbH & Co.KG, are a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repairs, you can count on us.

Lihat detail

Beriklan di sini