Pusat penggilingan putar vertikal

EMAG VLC 100 GT

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Tekanan kerja: 13 bar, aliran volume: 17,07 m³/menit, daya motor: 90 kW, kecepatan motor: 3480 rpm, berat: sekitar 1750 kg. Inverter frekuensi mesin rusak. Inspeksi di lokasi memungkinkan. Nwsdjxmkc Tspfx Adiji

Kondisi: bekas, Tahun pembuatan: 1998, Bore diameter 90 mm Stroke 490 mm Throat depth 400 mm Total power requirement 10 kW Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical honing machine Type VZH 90 / 450 F Year of manufacture 1998 Serial No. 50 / 1790 _____ Max. honing diameter 10 – 90 mm Max. honing depth 30 – 450 mm Max. spindle stroke 490 mm Spindle throat depth 400 mm Installation height under spindle nose approx. 1,200 mm Table size approx. 400 x 600 mm Max. workpiece diameter approx. 700 mm Spindle speeds steplessly variable 160 – 830 rpm Stroke speed steplessly variable 25 mm/min Spindle drive 4.5 kW Total drive power 10 kW - 400 V - 50 Hz Weight approx. 3,500 kg Overall height of the machine approx. 4,000/3,300 mm Accessories / Special equipment • Machine equipped with a Siemens S5 / Unipos 4.0 PLC control for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With fixed table 600 x 400 mm • Automatic shut-off after a specified and pre-selectable time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feed head ESZ 90/1 D • Separate hydraulics, central lubrication, workpiece clamping device on table • Currently no suitable coolant system, no honing tools included. Condition: good to very good – demonstration ready Delivery: ex stock – as inspected here Nsdpfx Ast Hw T Sediewi Payment: strictly net – upon receipt of invoice

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 3 kg, panjang pemakanan sumbu X: 100 mm, panjang umpan sumbu Y: 100 mm, panjang umpan sumbu Z: 200 mm, diameter benda kerja (maks.): 180 mm, panjang penggilingan: 200 mm, berat keseluruhan: 5.000 kg, kecepatan rotasi (maks.): 3.000 rpm, kecepatan rotasi (min.): 400 rpm, diameter alat: 80 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, de-en Nwsdpfx Ajx Af A Hodisi

Kondisi: bekas, Tahun pembuatan: 2007, translation-001 Nwjdpfx Aeyq Sv Dsdisi

Tahun pembuatan: 2006, Kondisi: baik (bekas), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Inspected and tested. Nodpfx Aedtr A Tjdiowi

Tahun pembuatan: 2015, Kondisi: baru, shaft furnace clear internal height: 1100 mm Nwedpfx Adecdi D Doiei clear internal diameter: 790 mm external diameter: 1560 mm external height (without lid): 1480 mm external height (with lid): 2300 mm electric heating: 40 kW circulation fan: 2.2 kW three-phase connection: 400 V, 50 Hz maximum temperature: 750°C

Kondisi: bekas, Tahun pembuatan: 2000, en-001 Nwedpot Hw Rdjfx Adiei

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As new: barely used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in vacuum Temperature control accuracy: ± 2 K Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of stabilization period Control voltage: 230 VAC / 24 VDC Usable chamber dimensions: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold furnace): < 5 * 10-5 mbar with clean, dry furnace Footprint: 900 x 1900 x 3000 mm Total weight: approx. 1500 kg Sound pressure level: < 70 dB We do not guarantee the accuracy, completeness, or currentness of the provided information. Nwjdjiryyaopfx Adioi

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), A DMT lathe is available. Distance between centers: 1000 mm, swing over bed/cross slide: 420 mm/210 mm, bed height: 340 mm, spindle bore: 64 mm, spindle diameter: 115 mm, spindle speed: 4000 rpm, quill diameter: 60 mm, quill stroke: 140 mm, cross slide width: 210 mm, cross slide length: 640 mm. Machine dimensions (X/Y/Z): approx. 2150 mm/1150 mm/1700 mm, weight: approx. 1800 kg, control: Heidenhain, operating hours: approx. 300 h. Documentation available. An on-site inspection is possible. Nwjdowtg H Rspfx Adiji

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Centre Height: 181 mm Centre Distance: 1000 mm Max. Grindable Workpiece Diameter: 360 mm Max. Load (Cantilevered): 1000 N (100 kg) Max. Load (Between Centres): 3000 N (300 kg) Nwsdpfx Aetqf Rzodisi Z-Axis Table Swivel Adjustment: 10° Table Drive (hydraulic): 0–4 m/min X-Axis Travel of Infeed Spindle: 80 mm Rapid Traverse (hydraulic): 50 mm Coarse Adjustment (Air Cushion): 280 mm Feed Drive via DC Motor Rapid Feedrate: 48 mm/min/Ø Feed Cycle: Plunge / Longitudinal Grinding 4 Pre-selectable Feedrates mm/min/Ø: 0.01–48 4 Pre-selectable Feed Amounts mm: 0.001–0.1 Spark-out Cycle in Traverse Grinding s: 0–99 / 0–99 strokes Creep Feed (Jog Infeed) mm/Ø: 0.001 Grinding Spindle Head Universal, Swiveling: 0–180° Grinding Wheel (External): D x W x Bore: 500 x 100 x 127 or 203.2 mm Grinding Wheel (Face, Option): D: 250 x 32 x 76.2 mm Grinding Wheel (Internal, Option): D: (2–250) mm Drive Power (External/Face): 5.5 (7.5) kW Drive Power Internal: 2.2 kW Peripheral Speed (External): 35 (50) m/s Grinding Wheel Wear (External): 160 mm/Ø Guard Width: 100 mm Grinding Spindle Diameter: 60 mm Internal Spindle Mount: 80 (100) mm Workpiece Spindle Head: Infinitely Variable Drive: Mk 4, 1/min: 30–270 / 50–450 Workpiece Spindle: Lockable Spindle Taper: MK 4/24 mm Spindle Nose for Flange: MK 4 mm cylindrical Ø63H6 x 6 Workpiece Headstock Swivels on Turning Part: 0–90° Tailstock: Quill Taper/Quill Diameter: MK 4/750 mm Quill Stroke: 45 mm Quill Force: 100–800 N / 250–1400 N adjustable Quill Actuation: Manual (foot switch) Quill Fine Adjustment: ±40 µm Electrical Connections: Total Machine Connected Load: 6.5–10 kW Grinding Spindle Head: 5.5 (7.5) kW Workpiece Spindle Head: 0.55 (1.1) kW Coolant Filtration: 0.75–2.2 kW Guideway Lubrication Pump: 0.1 kW Hydraulic Pump: 1.5 kW Hydraulic Tank: 80 litres Pneumatics: 6 bar Comparable with Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat.