EMCO Hyperturn 665MC Plus

EMCO Hyperturn 665MC Plus

Kondisi: bekas, Tahun pembuatan: 2013, produsen pengendali: Siemens, model controller: 840Dsl, Description: Kwsdpsw Tg Adjfx Aglot Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Sub Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Z-axis travel: 750 mm Tool Turret I (X/Y/Z): Technology: 12-station turret Tool interface: VDI30 Driven tools: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Turret II (X/Z): Technology: 12-station turret Tool interface: VDI30 Driven tools: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Features/Accessories: Chip management: Chip conveyor Coolant management: High-pressure internal coolant pumps, 14 bar Barfeed: Short bar loader, EMCO LM 1200 Finished part removal: Workpiece picker (pneumatic) with conveyor belt Oil mist extraction: Mechanical separator, make Absolent Tool holders: Various static and driven holders Additional equipment: Spindle chiller unit

Kondisi: bekas, Tahun pembuatan: 2000, en-001 Kwodju Ixwijpfx Aglst

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for brass parts! CNC turning and milling center | EMCO HYPERTURN 665 MC Plus with main and sub-spindle, C and Y axes, 2x turrets with 12 driven tool stations each! Technical specifications: Swing diameter over bed: 600 mm Swing diameter over cross-slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm X-axis travel: 270 mm Z-axis travel: 750 mm X2-axis travel: 205 mm Z2-axis travel: 750 mm Y-axis travel: 100 mm (+/- 50 mm) Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Turrets: 2x 12 stations, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with parts ejector Turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tool cabinet with driven and static tool holders, carbide inserts, and toolholders Collet chucks for main and sub-spindle Kwodpfexzq Ncsx Aglet Complete documentation etc. Machine available immediately! Machine ready for operation! We will load the machine! Transport can be organized upon request!

Kondisi: bekas, Tahun pembuatan: 2008, Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Kwodpev Rgzksfx Aglot Control: Siemens Sinumerik 840 PL Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Travel – X axis: 270 mm Travel – Z axis: 750 mm Travel – X2 axis: 205 mm Travel – Z2 axis: 750 mm Travel – Y axis: 100 mm (+/- 50 mm) Main spindle speed: 0 – 5,000 rpm Sub-spindle speed: 0 – 7,000 rpm Number of turret stations: 2 x 12 Tool interface: VDI 30 CNC Turning and Milling Center | EMCO HYPERTURN 665MCPlus with main and sub-spindle, C and Y axis, 2 x turrets prepared for driven tools, bar feeder Irco Profimat, as well as coolant system Knoll SF 1000/Turbo-1 included. The machine has approx. 26,710 hours in production operation. Scope of delivery / Equipment: + 2 spindles: Main and sub-spindle with C axis + 2 turrets for driven tools (12 stations each) + Upper turret equipped with Y axis + Internal coolant supply + Chip conveyor + Bar feeder Irco Profimat + Driven tools (straight and angular) + Chuck for main and sub-spindle + Extraction system + Workpiece ejection unit with conveyor belt + Coolant system Knoll SF 1000/Turbo-1 + Various holders, approx. 80 pcs. VDI 30 + Boring bar holder + Jaw holder The machine is in well-maintained condition. Please refer to the offer for further technical details. #Tags: HYPERTURN665 | HYPERTURN-665 | EMCO-HYPERTURN

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 109.078 h, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 45.000 m/menit, pergeseran cepat sumbu Y: 45.000 m/menit, pergerakan cepat sumbu Z: 45.000 m/menit, model controller: Siemens 840 D, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Hermle C30 U Siemens 840D Jam operasi mesin: 109078 jam, Jam operasi spindle: 22117 jam - Spindel HSK-A63, 10000 rpm - 32 tempat alat - Meja putar SRT 280 mm dengan sistem penjepit terintegrasi SK50 (jika tidak diperlukan, dapat ditutup atau diubah menjadi sistem penjepit titik nol) - Pendingin eksternal - Pendingin internal dengan filter sabuk kertas, 80 bar - Pistol pembilas serbuk - Konveyor serbuk - Modul kontrol manual - Pintu kabin otomatis - 32 tempat alat ditambah 87 tempat tambahan ZM87 - Kompensasi panas - Pengukur alat BLUM (sisi) - Probe pengukur Renishaw Kwjdpjxcp Slefx Aglst - Kontainer serbuk - Lampu status Mesin telah sepenuhnya diperiksa, tersedia protokol geometris dan pengukuran uji kebulatan. Mesin dapat diperlihatkan dan diuji setiap saat dalam kondisi menyala. Kondisi sangat terawat.

Kondisi: bekas, Tahun pembuatan: 2008, Mazak QTN-100MSY Tahun: 2008 X/Y/Z/B: 185/100/455/460 mm Diameter pembubutan maks.: 280 mm Kodpfx Agjxn Svdolswt Kapasitas batang hingga diameter 51 mm Spindel utama Kisaran kecepatan: 6000 rpm Daya penggerak utama: 11 kW Torsi maks.: 184 Nm Diameter lubang spindel: 61 mm Posisi spindel pada sumbu C: 0,001° Spindel kedua Kisaran kecepatan: 6000 rpm Daya penggerak: 11 kW Torsi maks.: 89 Nm Indeksasi: 0,001° Turret alat Jumlah posisi alat: 12 Alat berpenggerak Kisaran kecepatan: 4500 rpm Daya penggerak: 5,5 kW Torsi maks.: 35 Nm Perjalanan sumbu Sumbu X: 185 mm Sumbu Y: 100 (+/- 50) mm Sumbu Z: 455 mm Sumbu W: 460 mm Toolsetter Parts catcher Konveyor serbuk di sisi kanan Pompa pendingin Antarmuka feeder batang

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 810 mm, diameter putar di atas sled silang: 800 mm, diameter pembubutan: 320 mm, daya motor spindle: 25.000 W, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 73 mm, jarak pergerakan sumbu X: 210 mm, jarak lintasan sumbu Y: 110 mm, jarak gerak sumbu Z: 810 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 50 m/menit, kecepatan rotasi (maks.): 6.000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: 800 mm Swing diameter over cross slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centers: 1,130 mm Maximum turning length: 810 mm Kwedpfx Aewlvlgjglot Maximum workpiece dimensions: 300 mm TRAVELS Turret axes X1 and X2: 210 mm Turret axes Y1 and Y2: +65 / -45 mm Turret axes Z1 and Z2: 810 mm Head B-axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Motor power (30 min/continuous): 25/22 kW Maximum bar machining diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum spindle speed: 5,000 rpm Motor power (30 min/continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank cross-section: 20 x 20 mm Maximum boring bar diameter: 32 mm Turret indexing time (1 station): 0.18 s Maximum speed of driven tools: 6,000 rpm Driven tool power (5 min/continuous): 7.5/5.5 kW DIMENSIONS Installation area with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry-type parts unloading arm • Cutting load management and load monitor system • 1 double radial driven tool holder • 3 axial driven tool holders • 2 external tool holders • 2 double boring bar holders • 2 single radial driven tool holders • 2 internal boring bar holders • 2 Kitagawa BD 208 hydraulic chucks, dia. 210 mm • 1 set of jaws for each hydraulic chuck • Manuals and CE Declaration of Conformity Year of manufacture: 2010

Kondisi: bekas, Tahun pembuatan: 1986, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. Machine can still be inspected under power at the seller’s premises for a short period. In 2022, the machine underwent partial overhaul and maintenance at our facility, including restoration of geometry according to the manufacturer’s protocol. Equipment: Kjdpfev Tqqnox Aglewt - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Surface grinding attachment - Internal grinding unit - Fischer UJ70 internal grinding spindle - Paper band filter - Automatic cycle: Rough grinding – Finish grinding – Spark-out – Return

Kondisi: bekas, Tahun pembuatan: 2020, DOOSAN LYNX 2100LYA Tahun 2020 Kontrol sentuh FANUC Spesifikasi: Kecepatan Spindle Maks.: 6000 rpm Panjang Pembubutan Maks.: 510 mm Diameter Batang Maks.: 51 mm Diameter Pembubutan Maks.: 300 mm Sumbu Y: 105 mm (±52,5 mm) Sumbu C: 360° Kepala: BMT45P 24 posisi - Konik terprogram - Probe alat - Ejector serbuk serpihan LNS - Dudukan alat berpenggerak 4 unit (2/2) Kwsdpfxox Id D As Agljt - Dudukan alat biasa 6 unit Jam kerja: 3177 jam

Kondisi: bekas, Tahun pembuatan: 2007, translation-001 Kwjdpswx R Rksfx Aglst