Mesin bubut CNC

EMCO MaxxTurn 65

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 850 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 610 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 725 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 260 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 610 mm, torsi: 250 Nm, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. Integrated spindle motors, counter spindle water-cooled (preloaded roller guides) with Y-axis, on both main and sub spindle. State-of-the-art control technology SINUMERIK ONE with ShopTurn conversational programming. Main spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Spindle speed range: 0–5,000 rpm Counter spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Spindle speed range: 0–7,000 rpm Turret: • 12-position VDI 30 radial turret with directional logic for up to 12 live tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5,000 rpm Y-axis: • Travel: +/-40 mm • Hollow clamping cylinder incl. draw tube • C-axis for both main and sub spindle Further features: • Sinumerik ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant material detection • USB interface • Electrical cabinet air conditioning • Enhanced coolant system incl. high-pressure coolant pump (24 bar) • Chuck wash with an additional pump (3.5 bar) • Part ejector and flushing through sub spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English • Electronic handwheel • EMCO TOOL BREAKAGE AND WEAR MONITORING/SINUMERIK ONE • Alternating spindle speeds • SUB SPINDLE AS TAILSTOCK: This cycle enables utilization of the sub spindle with a mounted live center to support workpieces, allowing shaft parts to be clamped and machined on machines without a tailstock using the sub spindle. Max. pressure force is limited to 50% of the maximum axis force. • EMCO PROFI-NET ROBOT INTERFACE for robot integration, with HARTING connector. Signal exchange via Profinet, safety signals 2-channel / potential-free. • Digitization package for Sinumerik. Condition monitoring. • SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard with the following information: - Machine on – AUX ON - Automatic mode - Production mode – program active - Program is running, override between 95-105% - Piece count impulse (M30) - Programmable impulse (M300) 3D MACHINE DATA / MT65-G2: 3D data model of the machine included. Pneumatically actuated finished part catcher for gentle unloading of finished parts, transport into a catch box (standard) or onto a conveyor belt (optional). Hsdpfjx E Dncox Al Ijl Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connecting the EMCO SL1200 short bar loader. ...etc. Machine available immediately!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10014777, berat keseluruhan: 1.300 kg, kapasitas angkut: 210 kg, jangkauan lengan: 2.696 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet, and the associated cables. The robots come from a fully operational system and have been professionally dismantled. We carry out a functional test and inspect the robots. Should you be interested, we offer the opportunity to demonstrate the functions, ensuring that they meet your requirements. - Optional Addition for a Surcharge - We are pleased to introduce a new feature for our robots: the Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency stop function, a safety door, and a start-stop interface via the Profisafe bus. The controller is fully planned and programmed, allowing you to realize a straightforward stand-alone solution with a robot and a safety fence. Additionally, we offer further support for commissioning upon request. We grant a 14-day return policy for this. Any further warranties are excluded. We maintain an extensive inventory of these robots, and the prices listed apply as a package price. Hedpfxsq Suwbj Al Iol Discounts can be negotiated for larger order quantities. We invite you to contact us again to discuss further details. Sale exclusively to commercial customers.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, Pusat CNC Bubut dan Milling | EMCO MaxxTurn 65 Hedpfx Aljyzywxe Isl Produksi komponen bubut lengkap, rentang diameter 10 – 65 mm dan panjang 10 – 200 mm Kontrol FANUC 31iB, daya 29 kW, spindle utama dan spindle balik, kecepatan spindle maks. 5.000/7.000 rpm, sumbu X/Z = 260/610 mm, revolver pengganti alat 12 posisi dengan alat bertenaga (VDI 40), diameter/panjang pembubutan maks. 320/550 mm, ejektor benda kerja Inspeksi dapat dilakukan kapan saja dengan perjanjian.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 100 h, kecepatan spindel (maks.): 5.000 rpm, tinggi total: 1.800 mm, berat keseluruhan: 2.200 kg, produsen pengendali: FANUC, model controller: 31t- Model B, jumlah sumbu: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014 and features a robust FANUC 31i B control system and a double spindle arrangement with C and Y axes for complex machining operations. Equipped with a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length, this machine is ideal for precision turning and milling applications, providing a comprehensive solution for modern metalworking. Contact us for more information about this machine. Additional Equipment • Automatic bar loader with adjustable part length and bar diameter • Remnant extraction system • Polyurethane plastic guide channel Hodsx D H Sfopfx Al Isl • Longitudinal movement displacement system Advantages of the Machine Qualitative Machine Advantages • No spindle reduction required Technical Machine Advantages • Cooling: Thermo-compensation unit • Axes: C axis and Y axis • System: Linear guideway system, digital drive system • PART CATCHER: Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are conveyed into a collection box (standard) or onto a conveyor belt (optional). Max. finished part length: 175 mm, max. finished part diameter: 65 mm. • Tool system: 12-position tool turret, VDI30 radial • Driven tools: up to 12 driven tools • Sub spindle speed range: 0-7000 rpm • Bar length capacity: 1200 - 3200 mm • Bar passage diameter: 20 - 65 mm • Feed rate: 0 - 627 mm/sec • Turning length: 650 mm Additional Information Control unit: Integrated PLC Features: Fully automatic work cycle, monitoring and fault diagnosis (display output) Tools Max power: 6.7 kW Max torque: 25 Nm Speed range: 0-5000 rpm C-axis: Available Media Power supply: 200/220/400 V AC Compressed air requirement: Min. 7 bar Air consumption: 45 L/min Installation position (mounting) The installation kit includes vibration-dampening, height-adjustable leveling pads and mounting brackets. Machine history Note: Machine as new with only 100 operating hours Dimensions Machine depth 4500 mm

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivel range: ±10° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (supported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Refurbished as per Kellenberger guidelines, including new, modern, and future-proof control system. Photo shows already delivered machine with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are practically identical to those of the original controller, so no retraining is required. - Diagnostic function showing PLC messages and digital I/Os. - Dressing function can be expanded or modified as per customer requirements. - Workpiece spindle orientated stop available on request. - New max. infeed amount 40 mm, can be further increased on request. - 2-axis digital readout. x-axis resolution 0.5 µm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increasing centre height to max. 225 mm - Variable speed control for grinding spindle Included: - Operator tools - Drawbar for chuck Further accessories on request. The machine features an electronically controlled infeed system on the x-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Please note: This machine tool does not currently comply with the essential safety and protection requirements as specified in BetrSichV 2015. An increase in the required minimum safety objective must be determined via a risk assessment in accordance with BetrSichV. Hodjuxft Eepfx Al Iol

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, nomor mesin/kendaraan: S6AT2502, jarak pergerakan sumbu X: 250 mm, jarak lintasan sumbu Y: 40 mm, jarak gerak sumbu Z: 600 mm, kecepatan rotasi (maks.): 5.000 rpm, jumlah slot dalam magazin alat: 12, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 250 mm Travel distance Y-axis: mm Travel distance Z-axis: 600 mm Max. spindle speed: 5,000 rpm Hedpswvi Eusfx Al Isl Y-axis feed force: 7,000 N Rapid traverse: 12 m/min DRIVE & PERFORMANCE Max. drive power: 6.7 kW Main spindle speed range: 0–5,000 rpm SUB-SPINDLE Chuck diameter: max. 200 mm Speed range: 0–7,000 rpm Travel range: max. 580 mm ELECTRICS Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 85 A MACHINE DETAILS Overall height: 2,100 mm Overall length: 5,000 mm Overall width: 2,000 mm Total weight: 8,000 kg Tool holder: 30 mm CNC control manufacturer: SIEMENS CNC control model: SINUMERIK 840D Number of tool magazine slots: 12 EQUIPMENT Infinitely variable speed adjustment Chip conveyor With Y-axis and sub-spindle 12-station driven tool turret Tool holder: VDI 30 Including 3-jaw chuck (RÖHM, Ø 250 mm)

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas),

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 3.000 kg, Berat Rotor Maksimum --- 3000 kg (6613,87 lb) Berat Rotor Minimum --- 30 kg (66,14 lb) Diameter Rotor Maksimum --- 1400 mm (55,12 in) Diameter Poros Minimum --- 20 mm (0,79 in) Hodpfxor Dd Ave Al Isl Diameter Poros Maksimum --- 300 mm (11,81 in) Daya Motor --- 11 kW (14,75 HP) Unit Penggerak (Standar) --- 11 kW (14,75 HP) Kecepatan Penyeimbangan --- 0-3000 Rpm (25 Hz) (dapat disesuaikan naik turun) Unit Penggerak --- Sabuk saja atau Poros / Sabuk + Poros Panjang Ranjang --- 3000 mm (118,11 in)

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 4.700 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S6CZ1151, lubang spindel: 65 mm, kecepatan spindel (maks.): 5.000 rpm, daya motor spindle: 29.000 W, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, pengumpan batang, de Hjdjxwp I Aepfx Al Iol

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S6AW11S1, diameter putar di atas sled silang: 540 mm, panjang pembubutan: 550 mm, diameter pembubutan: 600 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 800 mm, Machine with C-axis, E-axis, Y-axis, W-axis, and driven tools at all stations TECHNICAL DETAILS Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: 73 mm Bar capacity: 65 mm Spindle speed: 0 - 5,000 rpm Spindle torque: max. 250 Nm Distance between spindle and sub-spindle: 1,050 mm Sub-spindle: A2-6, travel distance: 800 mm, spindle: 105 mm, torque: 250 Nm Rapid traverse in X/Y/Z axes: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1,000 rpm Hjdpfx Aew T Sq Tjl Iel MACHINE DETAILS Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight: approx. 5.7 t Machine dimensions LxWxH: 2.2 x 3.4 x 2.4 m Machine transport dimensions: approx. 3.3 x 1.9 x 2.2 m Electrical specification – voltage/frequency: 3 x 400 V / 50-60 Hz Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) EQUIPMENT - Control cabinet fitted with Rittal cooler - Hinged belt chip conveyor - Chip tray - Compressed air gun - No chuck included in the sale

Kondisi: bekas, System: used piston diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Hodedkdi Topfx Al Ijl Flow rate: 40.0 m³/h Pressure: 1.6 MPa