Kepala penggilingan universal "HURON

EMENA V 0

Kondisi: bekas, Travel in X-axis: 6500/13,150 mm Travel in Y-axis: 4000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 2250 mm Control system: Sinumerik 840 D Clamping surface of table: 5500/12,150 x 3000 mm Passage between columns: 3500 mm Max. distance between work table and spindle nose: 3000 mm Max. workpiece weight: 70,000 / 105,000 kg Ram dimensions: 480 x 510 mm Spindle speeds – stepless: 6.3 - 4000 rpm Milling spindle motor: 63 kW Torque at the spindle: 3300 Nm Tool holder: DIN 39871 AD ISO 50 Feed rate X/Y/Z = 24,000 mm/min Total power requirement: 120 kVA Machine weight approx. 245 t Required space approx. 29 x 7.7 x 8.1 m The machine is in almost as-new condition and was completely overhauled and modernized in 2020 for €1.6 million! Equipment/Accessories: - Automatic tool magazine for 153 tool positions - Automatic milling head magazine for 6 milling heads - Machining modules/milling heads:  Machining module – straight – straight long –  Machining module – angle standard – 4000 rpm, 144 x 2.5b0, ISO 50  Machining module – narrow extended angle – 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5b0, ISO 50  Machining module – universal index – 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5b0, B-axis +/- 44 x 2.5b0, ISO 50 - Coolant system - Chip conveyor - Technical documentation Cjdpfx Aaowa Dx Ro Topw

Kondisi: baru, gaya penekanan: 100 t, panjang langkah: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm Codpfxjgp Dc Rj Aa Tspw - Cylinder is movable - Electrically or manually operated - Pressure gauge - Emergency stop - 400V

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1984, Pressing force: 3600 kN, Pressing stroke: 1.7 mm, Pressing capacity: 6120 J. Stroke: 60 mm, Installation height: 340 mm. Table clamping width/depth: 440 mm/525 mm, Tool holder width/depth: 440 mm/320 mm. Dimensions (X/Y/Z): 1300 mm/2000 mm/2230 mm, Weight: approx. 6300 kg. Cpjdjr A Eifspfx Aa Tow

Tahun pembuatan: 1980, Kondisi: bekas, Table length 2,000 mm Table width 1,800 mm Cpodot Hwq Ropfx Aa Tsw Table load capacity 12.5 t Total power requirement 10 kW Machine weight approx. 7.5 t Space requirement approx. [to be completed] m Table size approx. 2,000 x 1,800 mm Maximum table load approx. 12,500 kg Table travel (longitudinal) 1,250 mm Table height above floor 920 mm Longitudinal feed rate 0.63 - 2,000 mm/min Rotary feed rate (based on 1,000 mm Ø) 1 - 3,150 mm/min Rapid traverse (longitudinal) 2,000 mm/min Rapid traverse (rotary, based on 1,000 mm Ø) 3,150 mm/min Machine weight 7,500 kg External dimensions (LxWxH) 3,700 x 2,100 x 920 mm Drive output total 10 kW - 380 V - 50 Hz Accessories / Special equipment - Steel telescopic covers for the guideways - Infinitely variable table feed - Optical display for setting and reading the longitudinal adjustment - Optical angle setting and reading device Condition: satisfactory to good - ready for demonstration Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice We kindly ask you to review our offer. Please always enquire about your requirements for good used machines with us.

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 6.000 rpm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL MAIN DATA Year of manufacture: 2020 Capacities / Travel paths: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Cross (Z): 1,500 mm Clamping area NC rotary table: Indexing plate: 2,400 x 1,900 mm Max. transport load (with centered load): 10,000 kg Positioning accuracy arc/sec: ± 2.5" Max. swing diameter: Approx. 2,900 mm Paint finish: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Retaining bolt: DIN 69872 Type A Main spindle drive: Motor / Manufacturer main spindle drive: Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed regulation/gearbox: 3-stage (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: - Low range: 0-738 rpm - Medium range: 739-1,842 rpm - High range: 1,843-6,000 rpm Axis drives/feed: Axis drive motors: Manufacturer Heidenhain (digital drives) Rapid traverse max.: X, Y, Z axes: 25,000 mm/min Working feed max.: X, Y, Z axes: 15,000 mm/min Maximum average acceleration: 2 m/s² Max. feed force: X, Y, Z axes: 26,000 N Axis drive systems: X-axis (longitudinal): Preloaded ball screw Ø 63 x 40 Z-axis (vertical): Preloaded ball screw Ø 63 x 20 Y-axis (cross): Preloaded ball screw Ø 50 x 20 Guide system: X-axis (longitudinal): 6 pcs INA RUE 55 EL Z-axis (vertical): 4 pcs INA RUE 65 EL Y-axis (cross): 8 pcs INA RUE 55 E-HL and additional damping unit Clamping table / Table surface: Cpjdpfxsygiwqo Aa Tew T-slot size 10x: 22 H 12 mm Reference slot center 1x: 22 H 8 mm T-slot spacing: 150 mm (pitch of outer slots 1800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 stations Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system upgraded to 37 bar through spindle Special operating mode 4 RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this series are sourced through a strict selection process and undergo a thorough examination (deep-dive check). After intensive cleaning, any detected obvious defects and faults are professionally repaired by our expert service team.

Kondisi: baik (bekas), panjang pembubutan: 6.000 mm, lubang spindel: 260 mm, Swing diameter over bed Ø: 850 mm Swing diameter over cross slide: 500 mm Turning length: 6000 mm Spindle bore: 260 mm Spindle power: 28 kW Bed width: 650 mm Quill stroke: 300 mm Spindle taper: 6 Morse taper (6 MT) Workpiece weight: 5000 kg Csdowvtg Aepfx Aa Tjpw Length: 10,000 mm Width: 2,100 mm Height: 2,600 mm Weight: 12,800 kg

Kondisi: diremajakan ulang (bekas), Kuka KR360-2 Cpodpohy N Rpsfx Aa Tjw

Kondisi: baik (bekas), Tahun pembuatan: 1995, Mesin bubut CNC siklus MONFORTS KNC 6, tahun 1995. Kontrol: Monforts MTC K. Jarak antara senter: 2000 mm. Diameter ayun maksimum di atas tempat tidur: 630 mm. Diameter ayun maksimum di atas dudukan pelana: 380 mm. Putaran spindle: 2–1800 rpm. Motor spindle: 21/15 kW. Lubang spindle: 71 mm. Chuck tiga rahang FORKARDT 400 mm. Pemegang alat Multifix ukuran C dengan 3 slot alat. Kebutuhan ruang: panjang 4000 mm, lebar 2200 mm, tinggi 1900 mm. Berat sekitar 5000 kg. Dokumentasi mesin lengkap tersedia. Mesin dapat didemonstrasikan dalam kondisi hidup. Cjdpfehktd Nsx Aa Tepw

Kondisi: sangat baik (bekas), Tacchi HD/1450 – CNC Lathe 725 x 4000mm (2012) Nomor Seri: 7264 Cjdpfjxc In Ssx Aa Tjpw Tahun: 2012 Kontrol: Fanuc OiTD CNC Kondisi: Bekas – berfungsi dengan baik Spesifikasi Teknis: Tinggi pusat: 725 mm Putaran di atas alas: 1450 mm Putaran di atas slide silang: 1000 mm Jarak antara pusat: 4000 mm Motor penggerak utama: 60 kW Bobot maksimum antara pusat (tanpa penyangga): 15.000 kg Rentang kecepatan spindle: 1,9 – 560 rpm Fitur & Perlengkapan: 2 x steady rest 3-titik Roda tangan (handwheel) Konveyor serpihan Toolpost hidrolik 4-posisi Chuck 4-jaw Kontrol Fanuc OiTD CNC

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 120 mm, diameter pembubutan: 1.550 mm, diameter pembubutan di atas alas geser: 1.550 mm, diameter pembubutan di atas carriage atas: 1.220 mm, panjang pembubutan: 6.000 mm, panjang total: 8.500 mm, lebar total: 1.600 mm, tinggi total: 1.600 mm, berat benda kerja (maks.): 15.000 kg, penjepit spindle: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the acceptance criteria of the WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: General overhaul on order, delivery time 3.5 months from order placement Technical specifications: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 14,100 kg Cpjdpfx Aasv Ab Dqj Tow Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital readout for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post - Rear safety guard along the entire length of the machine - Frequency inverter incl. soft-start function and potentiometer for stepless speed control