Engel DUO 11050/2300 (2004)

Engel DUO 11050/2300

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 70.029 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 51561, gaya penjepit: 2.300 kN, diameter sekrup: 135 mm, tekanan injeksi: 1.600 batang, langkah pembukaan: 3.800 mm, tinggi alat: 1.890 mm, RINCIAN TEKNIS Gaya Penutupan: 2.300 kN Ukuran pelat (L x T): 2.900 x 2.500 mm Jarak antara tiang (L x T): 2.000 x 1.600 mm Tinggi cetakan minimum/maksimum: 700 mm/1.890 mm Stroke pembukaan maksimum: 3.800 mm Unit Injeksi Diameter sekrup: 135 mm Volume tembakan: 8.870 cm³ Berat tembakan (PS): 8.071 g Tekanan injeksi: 1.600 bar RINCIAN MESIN Berat bersih (dengan panel kontrol): 113 t + 18 t Lhsdpfxsy T Hx Hj Aptoh Jam operasi: 70.029 jam

Kondisi: baik (bekas), Max. bar passage: 36 mm Max. spindle speed: 6,300 rpm Number of spindles: 2 Control: Traub TX8i Tool Turret 1: Number of tools: 12 X-axis: 50 mm Z-axis: 50 mm Front Tool Turret: Number of tools: 7 Lhedpfx Apstrvzxetsh Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 370 mm Z-axis: 250 mm Rear Tool Turret: Number of tools: 5 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine ENGEL DUO 11050/2300 Basic Data Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Clamping Unit Clamping force: 2,300 kN Platen dimensions (horizontal × vertical): 2,900 × 2,500 mm Tie-bar spacing (horizontal × vertical): 2,000 × 1,600 mm Minimum mould height: 700 mm Maximum mould height: 1,890 mm Maximum opening stroke: 3,800 mm Injection Unit Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Maximum injection pressure: 1,600 bar Dimensions and Weight Net machine weight: 113 t Control cabinet weight: 18 t Total weight: approx. 131 t Optional ESS Energy Saving System The machine can be equipped with a modern ESS (Energy Saving System) servo drive, which improves the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor speed to the actual demand during the production cycle. As a result, electric power is only drawn when truly needed. ESS System Benefits: - Reduction of energy consumption by up to 30% - Servo drive technology for the hydraulic pump - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle times Ledpfxeyuf Tde Aptohh - Lower heat build-up in the hydraulic system - Extended lifespan of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system significantly reduces machine operating costs while maintaining full production parameters.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, 1 Ledex Tf Iaopfx Aptjhh

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Mesin injection ENGEL DUO 11050/2300 Tahun produksi: 2004 Jam operasi: 70.029 jam Unit penutup Gaya penekanan: 2.300 kN Dimensi pelat penjepit (H x V): 2.900 × 2.500 mm Lhjdpfx Ajxq D H Toptoh Jarak antar tiang (H x V): 2.000 × 1.600 mm Tinggi cetakan min./maks.: 700 – 1.890 mm Langkah pembukaan maksimum: 3.800 mm Unit injeksi Diameter screw: 135 mm Volume injeksi: 8.870 cm³ Berat injeksi (PS): 8.071 g Tekanan injeksi: 1.600 bar Dimensi & berat Berat bersih (dengan panel kontrol): 113 + 18 t

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 70.029 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 51561, gaya penjepit: 2.300 kN, diameter sekrup: 135 mm, tekanan injeksi: 1.600 batang, langkah pembukaan: 3.800 mm, tinggi alat: 1.890 mm, RINCIAN TEKNIS Gaya Penutupan: 2.300 kN Ukuran pelat (L x T): 2.900 x 2.500 mm Jarak antara tiang (L x T): 2.000 x 1.600 mm Tinggi cetakan minimum/maksimum: 700 mm/1.890 mm Stroke pembukaan maksimum: 3.800 mm Unit Injeksi Diameter sekrup: 135 mm Volume tembakan: 8.870 cm³ Berat tembakan (PS): 8.071 g Tekanan injeksi: 1.600 bar RINCIAN MESIN Berat bersih (dengan panel kontrol): 113 t + 18 t Lhedsxuqc Nepfx Aptsh Jam operasi: 70.029 jam

Kondisi: baik (bekas), Tahun pembuatan: 2014, jam operasional: 18.520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Lhedpjwxmb Esfx Aptoh Applications: Commercial waste for thermal or material recycling, e.g. paper, cardboard, plastics and foam materials, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet: complete with ABB frequency converter Recooler Control panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible by appointment. Delivery time: immediately.

Kondisi: baik (bekas), mesin penggiling tanpa pusat Lhjdpfx Aotrguveptjh

Kondisi: baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, Travel paths: Longitudinal (X): 2500 mm Vertical (Y): 1250 mm Transverse (Z): 1000 mm Table size (rotary): Length: 1000 mm Width: 1000 mm Max. table load: 5000 kg T-slots: 6 x 22 mm H10 Drive power: 100 % duty cycle 24 kW Tool holder: ISO 50, DIN 69871 - AD Spindle speeds: 20 – 4000 rpm Torque: 479 Nm Feed range X, Y, Z axes: 10 – 10000 mm/min Rapid traverse X, Y, Z axes: 25000 mm/min Weight (approx.): 15000 kg Equipment: - Internal coolant supply according to DIN 69871 form AD, including minimum quantity lubrication with 15 selectable dosages via M-functions, programmable: 20 bar - NC rotary table, size 1000 x 1000 mm as 4th axis, integrated into machine control. Max. load 5000 kg, Lhjdpfx Asykbxzsptsh positioning accuracy ± 5 arc seconds, table surface with 22 mm T-slots - Chip conveyor for TA-D 25 - Tool changer Accessories: - Front-mounted movable control panel including Heidenhain iTNC 530 control (single processor) - Portable electronic handwheel HR 420 with 3 m spiral cable (option) - 3D thermal expansion compensation - Automatically indexing milling head/2 planes at 2.5° increments (H200) (option) - Distance from spindle nose to table edge 250 mm - NC rotary table, size 1000 x 1000 mm as 4th axis integrated into the machine control. Max. load 5000 kg, positioning accuracy ± 5 arc seconds, table surface with 22 mm T-slots. - Coolant system with 150 l tank, delivery pressure 5 bar, delivery rate 50 l/min, outlet via spray ring around machine spindle - Splash guard enclosure, fully closed on 4 sides with front sliding doors and additional side sliding door on the left column with viewing windows on all 4 sides - Heidenhain servo motors on all axes with digital drive technology - INA linear roller guide system on all axes - Direct linear measuring system Heidenhain on all axes - Telescopic covers for X-axis guides - Ball screws in X, Y, and Z axes - Automatic cycle lubrication for all axes and drive elements - Electrical equipment by Siemens - Hydraulic system by Vickers