Engel e-motion 440H/440H/160 T Kombi (2016) dengan hanya 13.000 jam operasi

Engel e-motion 440H/440H/160 T combi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Engel Victory 80/45 Tech Cjdpoh Rawbsfx Al Terf Clamp force: 45 tons, tie-bar-less Screw diameter: 22 mm Year of manufacture: 2004 Control unit: CC 200

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, gaya penjepit: 2.500 kN, diameter sekrup: 55 mm, berat keseluruhan: 8.400 kg, Hydraulic injection moulding machine from 2023. This HAITIAN MA 2500 III offers a clamping force of 250 tonnes and a platen size of 850 x 850 mm. The machine features an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking for a high-quality injection moulding machine, the HAITIAN MA 2500 III we are offering for sale is well worth considering. Contact us for further details on this machine. • Clamping Unit • Opening force: 165 kN • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie bar distance: 580 x 580 mm • Max. mould height: 580 mm • Min. mould height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min. mould dimensions: 410 x 410 mm • Injection Unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticising capacity: 47.7 g/s • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Carriage force: 99 kN • Pump motor power: 37 kW • Heater power: 21.45 kW • Oil tank capacity: 340 l • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control System • Controller: KEBA 2985 - CP053 • Features: • 15" colour touchscreen • Euromap 67 robot interface • USB storage • 200-tool memory • Cycle history • Alarm tower • RFID login/password • Multilingual interface • Process graphs • Maintenance pages • Metric/imperial selectable • Included Options/Extras (machine-integrated) • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial exhaust • Festo air-blast system • 12-zone central lubrication (PSG) • 4-way flowmeter • Robot interface • Includes 3-zone screw • CE-certified safety cell Additional Equipment • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Travel paths: X 2000 mm / Y 880 mm / Z 1300 mm • Max. extractable weight: 12 kg Cjdoy N Sqmopfx Al Terf • Power supply: 400 VAC / 50-60 Hz • Accuracy: 0.1 mm • Robot weight: 530 kg • Included: touchscreen controller, USB programs, pneumatic gripper, vacuum suction cup, conveyor belt ready • Included peripherals: FORMAX E3 Monofase hopper loader (2 units) • Hopper capacity: 3.0 l • Power: 1150 W • Inlet diameter: 40 mm • Throughput: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), angebot-2-spritzgiessmaschinen-2008-2009 Credpfx Aex I Rqcel Tef

Kondisi: baru, nomor mesin/kendaraan: 1900040028, panjang sabuk konveyor: 1.700 mm, lebar sabuk konveyor: 440 mm, kecepatan sabuk konveyor: 57 mm/dtk, daya: 0,18 kW (0,24 hp), tegangan masuk: 230 V, frekuensi input: 50 Hz, Voran conveyor belt 1,700 x 440 mm FDA compliant Crodpfx Ajtv E Dijl Tof

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R14101358 (Roboter) / E14130752 (Steuerschrank), berat keseluruhan: 1.270 kg, kapasitas angkut: 250 kg, jangkauan lengan: 2.655 mm, produsen pengendali: FANUC, model controller: R-30iB, tegangan masuk: 400 V, FANUC industrial robot R-2000iB 250F, year of manufacture 01/2014 (control cabinet 12/2013). Axes: 6, reach: 2,655 mm, payload: 250 kg. Dimensions: length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Complete with robot manipulator, connecting cables, teach pendant, and control unit. (For further details, see type plates.) IPendant A05B-2255-C101#EGN Credetk N E Tjpfx Al Tjf We also offer accessories such as bases, spot welding guns, rotary tables, and much more. Demonstration of the robot upon request. Packaging and loading included.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Ref.-No.: 18494 Manufacturer: ENGEL Model: Victory 50-200 SPEX Year of manufacture: 2013 Clamping Unit Clamping force: 50 tons Opening stroke: 400 mm Minimum mold height: 200 mm Daylight: 600 mm Platen size (H x V): 500 x 450 mm Injection Unit Screw diameter: 25 mm Shot volume: 69 cm³ Crodpfxoxzq Sks Al Tof Shot weight (PS): 62 g Injection pressure: 2,400 bar Dimensions and Weight Dimensions (LxWxH): 3.4 x 1.3 x 1.8 m Machine weight: 2,900 kg Additional Information & Extras Core pull: 1 unit Additional Information: ENGEL Victory 50 SPEX (2013) – Tie-barless injection moulding machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Thanks to the tie-barless technology and special SPEX equipment, this machine is ideally suited for precise and flexible production processes. Technical specifications: Advantages: Tie-barless design → maximum accessibility to the mould area SPEX special equipment → optimised for specific applications High precision & repeatability Energy-efficient operation Compact design → space saving Ideally suited for automation (robot interface possible) Fields of application: Automotive industry Electronics Medical technology Technical plastic parts 👉 The machine is in good condition and can be inspected by appointment.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135 Crodpfx Aleuggb Ds Tef  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Kondisi: bekas, nomor mesin/kendaraan: 008388, Arbeitsbereich Achse X: 3086 mm Cedpoyngzvjfx Al Torf Arbeitsbereich Achse Y: 2185 mm Arbeitsebene: Nestingtisch Leistung Haupt-Spindel: 15 KW Anz. kontrollierte Achsen: 4 Achsen Anzahl Bohrspindeln: 18 Anzahl Werkzeugplätze: 20

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTRE (POINT-TO-POINT) CNC machining centre for milling, drilling, cutting, and edge-banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel 650 mm) Maximum working area for edge-banding (mm): 4000 x 1600 x 100 No. 8 clamping table with consoles (number of consoles) - 1400 mm LED setup aid for positioning of vacuum suction cups (Y-axis) No. 2 vacuum pumps (capacity: 140 m³/h) Safety housing for the machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type) with 18 tool positions Codsw A Ruqjpfx Al Terf No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivelling 90° in X-Y direction), diameter 200 mm Edge-banding unit (PUR glue + premelter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE-BANDING UNIT No. 2 edge magazines for roll material OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and contour scraping

Kondisi: bekas, nomor mesin/kendaraan: LC600, Technical Specifications and Performance Data This used bottling line is configured for highly efficient beverage production in 0.5L PET bottles. Optimized for carbonated and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molder upstream from the filling monoblock, ideal for flexible maintenance and line balancing. Production speed: 25,000 bph Bottle formats: Compatible with 0.5L bottle format Containers: Designed for handling PET bottles Configuration: Non-combi (separate blow molding and filling systems) Main components and year of manufacture: - Sidel Universal SBO 14 blow molder (2007) - Sarcmi 70-10 ISO filling monoblock (1988 – fully overhauled 2025) - Sarcmi labeler (2011) - Zambelli shrink packer (2004) - Handle applicator (2004) - ACMI twin-head palletizer (1992) Csdpfx Asyk E Srol Tjrf Advanced Automation and Control Systems The line benefits from a modernized conveyor and control system, with the conveyor management and electrical control cabinets overhauled in 2010–2011. This upgrade improves synchronization between modules, enhances safety interlocks, and supports stable high-speed performance throughout forming, filling, labeling, and packaging operations. - Overhauled conveyor control system and electrical control cabinets in 2010–2011 - Integrated interlocks for safe operation at high throughput - Non-combi architecture simplifies maintenance and phased upgrades Production Line Integration Capabilities Designed as a complete production solution for water bottling, this used filling equipment offers seamless integration from the blow molding process through to end-of-line palletizing. The non-combi layout allows independent operation and optimization of the blow molder and filling monoblock, facilitating changeovers and maintenance without stopping the entire line. - Inline process flow: Blow molding → Filling monoblock → Labeling → Shrink packing → Handle application → Palletizing - Conveyor system overhauled for reliable accumulation and transfer - Suitable for carbonated and still water in PET Machine Condition and Maintenance History This used bottling line has benefited from targeted upgrades to the conveyor management and electrical control systems, completed in 2010–2011. A key highlight is the Sarcmi 70-10 ISO filling monoblock, originally manufactured in 1988 and fully overhauled in 2025 to ensure maximum operational reliability. The line is described as operational and is offered as a ready-to-use industrial packaging solution for used equipment projects. - Sarcmi 70-10 ISO filling monoblock: overhauled in 2025 - Conveyor and electrical control management overhauled: 2010–2011 - Renowned OEM components throughout the line - Operational with current 0.5L PET format