Mesin cetak injeksi

ENGEL ES 200 - 50 HL

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Seven Arburg injection moulding machines are available: 1) Arburg 320C 600-250 Year of manufacture: 2001 Operating hours: 83,365 h Clamping force: 600 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 4,000 mm / 2,300 mm Dujdpfx Adetyyn Hjgol Including Multilift handling unit. 2) Arburg 420C 1000-250 Year of manufacture: 2001 Operating hours: 90,769 h Clamping force: 1,000 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 750 mm Platen gap: 750 mm Platen dimensions X/Y: 570 mm / 570 mm Tie bar spacing: 420 mm / 420 mm Core pulls: 2 Machine dimensions X/Y: approx. 4,700 mm / 2,350 mm Including Multilift handling unit. 3) Arburg 270C 300-100 Year of manufacture: 1999 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 1 Temperature control units: 6 Including Geiger handling unit. 4) Arburg 320C 300-100 Year of manufacture: 2000 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 125 mm / 110 mm Max. opening stroke: 350 mm Platen gap: 350 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 1 Temperature control units: 6 5) Arburg 220C 250-60 Year of manufacture: 2001 Operating hours: 86,595 h Clamping force: 250 kN Screw diameter: 22 mm Shot weight: 27 g Max. injection pressure: 2,340 bar Injection volume: 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 6) Arburg 270C 300-100 Year of manufacture: 2007 Operating hours: 59,885 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 3,750 mm / 2,400 mm Including Multilift handling unit. 7) Arburg 220S 250-60 Year of manufacture: 2001 Operating hours: 57,504 h Clamping force: 250 kN Screw diameter: 18 mm / 22 mm Shot weight: 18 g / 27 g Max. injection pressure: 2,500 bar / 2,340 bar Injection volume: 20 cm³ / 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 Machine dimensions X/Y: approx. 3,300 mm / 1,100 mm Documentation available. Inspection on site possible.

Kondisi: sangat baik (bekas), Engel Victory 1350/220 Tech Clamping force: 220 tonnes Year of manufacture: 2004 Platen size (W x H): 860 x 830 mm Duodpfx Aspdrpzjdgjl Screw diameter: 55 mm Injection volume: 618 cm³ Control system: CC 200 Minimum mould installation height: 250 mm Maximum mould installation height: 730 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 1 used injection moulding machine Manufacturer: ENGEL Model: VICTORY 200/28 TECH Year of manufacture: 2007 Clamping force: 28 tonnes Tie bar spacing: TIE-BAR-LESS Screw diameter: 25 mm Max. shot volume: 49 cm³ Shot weight: 44 g/PS Dusdpfsu Eu Tnex Adgsl Control system: CC200 Equipment: - 1 x core pull

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Engel ES 330/80 HLS Dodpfjpdr Aiox Adgjul Clamping force: 80 tons Year of manufacture: 1998 Screw diameter: 35 mm Shot volume: 154 cm³ Enlarged mounting platen: 660 x 560 mm Minimum mold height: 200 mm

Kondisi: baik (bekas), Tahun pembuatan: 2003, jam operasional: 106.864 h, gaya penjepit: 1.300 kN, diameter sekrup: 35 mm, The machine has been very well maintained, with service and maintenance always carried out on schedule. Duedpsrp Dyrjfx Adgel Good condition, fully functional Still in operation until week 11 Additional service reports and documentation available Technical data: Year of manufacture: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Injection force: 50 kN Opening stroke: 500 mm Distance between tie bars: 750 mm Ejector force: 40 kN Advance Package - VE561/20 LGS Position-controlled screw with control valve on the injection unit for especially high dynamics and reproducibility of the injection process, back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic power optimization and corresponding energy reduction through stepless adjustment of the pump drive speed to match the respective power requirements of the injection cycle - VE 460/00 ED electromechanical dosing drive via a frequency-controlled three-phase asynchronous motor to increase productivity through simultaneous movements, more gentle material preparation, and relevant energy savings compared to hydraulic dosing Loading and transport (Europe-wide) can be organized on request, at an additional charge. Prices plus VAT Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to contact us, please visit our website.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Engel VC 200/40 TECH Injection Moulding Machine Year of manufacture: 2007 Control system: CC 200 Dodpfx Ajwa S Uajdgjul Clamping unit: Clamping force [kN]: 400 Platen dimensions (h x v) [mm]: 550 x 430 Min./max. mould height [mm]: min 180 Max. daylight opening [mm]: 530 Injection unit: Screw diameter [mm]: 30 Injection volume [cm³]: 99 Injection pressure [bar]: 1451 Electro-hydraulic equipment: Rated pump motor power [kW]: 15 Dimensions and weight: Net weight with control cabinet [t]: 2.7 Dimensions (L x W x H) [m]: 3.26 x 1.2 x 1.8

Kondisi: bekas, Tahun pembuatan: 2006, Berat 3400 kg Duedpfx Aeuy Sdtjdgol

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), Battenfeld HM 100/525 Injection Moulding Machine Year: 2006 Control System: Unilog B4 Technical Specifications Clamping Force: 1000 kN Platen Size (H x V): 680 mm x 594 mm Tie Bar Spacing: 470 mm x 420 mm Mould Opening Stroke: 500 mm Minimum Mould Height: 250 mm Maximum Daylight: 750 mm Hydraulic Ejector Stroke: 150 mm Ejector Force Forward/Backward: 41.2 kN Injection Unit Screw Diameter: 40 mm Ls/D Ratio: 22 Injection Pressure: 2100 bar Injection Volume: 251 cm³ Shot Weight (PS): 228.4 g Injection Stroke: 200 mm Screw Speed: 0 - 318 rpm Maximum Plasticizing Rate: 30.4 g/s Nozzle Pressure: 86 kN Electrical & Hydraulic Equipment Djdpjk Rnvmofx Adgeul Installed Heating Power: 12.1 kW Adjustable Barrel Heating Zones: 1+3 Pump Motor Power: 18.5 kW Hydraulic Oil Capacity: 275 liters Dimensions & Weight Total Machine Weight: 4,600 kg Dimensions (L x W x H): 4.3 x 1.5 x 2.0 m

Kondisi: baik (bekas), Tahun pembuatan: 1992, Fanuc Fanuc automatic chuck AC 100 Clamping force: 100 tons Year of manufacture: 1992 Dedpfeh R Npxsx Adgoul

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2.065.0, gaya penjepit: 200 kN, New digital control system from BBM Two sets of extruder heads (see attached photos) Dedpfx Adew Dcybjgoul