ES 1350/250 HLST

ENGEL

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, gaya penjepit: 6.500 kN, diameter sekrup: 60 mm, berat keseluruhan: 6.500 kg, produsen pengendali: ENGEL, This electric injection moulding machine Engel duo 2400/650 was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection volume of 890 cm³. The clamping force reaches up to 6500 kN, with a maximum mould weight of 11,000 kg. Take advantage of this opportunity to purchase the Engel duo 2400/650 electric injection moulding machine. Contact us for further information on this machine. Additional Equipment • Oil tank capacity – injection unit: 500 l • Maximum cooling capacity (at 32°C water inlet): 29.40 kWcool • Water consumption (32°C): 4.80 m³/h Machine Advantages Quality Features • The machine is equipped with electric water manifolds (4 E-Flomos, each with 8 circuits). • The injection units are fitted with accumulators, enabling a high injection pressure of up to 2400 bar with a 60 mm screw. Technical Features • Maximum injection capacity: 890 cm³ • Screw torque: 2000 Nm // maximum screw speed at reduced torque: 275 min⁻¹ • Reduced torque at maximum screw speed: 1600 Nm • Recovery rate (3-zone screw): 51 g/s // Recovery rate (barrier screw): 67.1 g/s Ksdpoy D Npcjfx Afiedk • Injection rate: 353 cm³/s • Nozzle stroke: 950 mm • L/D ratio: 24.0 • Heating zones including nozzle: 8 // Heating capacity: 27.5 kWel • Opening force with cushion: 510 kN • Maximum platen distance: 1750 mm Additional Information Dimensions & Weight • Width of ejection chute: 1100 mm • Weight of clamping unit: 20,000 kg • Maximum mould weight (movable platen): 7,330 kg • Maximum mould weight (fixed platen): 7,330 kg • Maximum total mould weight: 11,000 kg Cycle Data (Euromap 6) • Stroke: 700 mm • Dry cycle time: 2.9 s Control System: Monocompute CC300 Key Features • 21.5" Full HD touchscreen • USB interface / Ethernet port • E-move control element • 3 key cards for user login • Graphic icons for cycle control • Display languages: German, English • Acoustic error signal / signal light for fault indication Programs & Monitoring • Power Control: optimises motor performance during metering • Mould parallelism measurement • IQ Weight Monitor: monitors shot weight and viscosity • IQ Weight Control: automatic adjustment of injection parameters in case of fluctuations • Quality monitoring interface (injection time, dosing time, pressure, cycle time) • Continuous ejection possible when monitoring is deactivated Clamping Unit & Platens • Reinforced platens (FAP & BAP each +50 mm) • Reduced min./max. mould height and platen spacing (-100 mm due to reinforcement) • FAP: smallest possible platen opening, spherical cap minimised • BAP: without ejector opening • Additional threads as per EUROMAP VOL1 • Centring grooves as per drawing • Platen ejector – Variant A (customised to clamping pattern) • Safety interface for ejector Hydraulics & Core Pulls • Hydraulic core pull: • 1-fold on moveable platen • 2-fold on fixed platen • 2-fold on moveable platen with PQ proportional valve, volume measurement, pressure/speed adjustment • Interface for core pull intermediate position Mould Heating & Cooling • Mould heating: 16 circuits, max. 40 kW heating capacity (Euromap 14)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, Used injection molding machine directly from the manufacturer! As the manufacturer KraussMaffei, we are offering one of our used injection molding machines for sale. Kdedpfenh Rnusx Afisk CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5,000 kN - Distance between tie bars (H x V): 900 x 800 mm - Max. mold opening distance: 1,170 mm - Min. mold installation height: 480 mm - Opening stroke of mounting platen: 1,650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (Retract: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1,742 bar - Injection volume: 1,953 cm³ - Shot weight for PS: 1,777 g - Injection flow rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical Specifications - Pump connected load: 90 kW - Heating power: 44 kW Weight and Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As a rule, we supply this system in fully functional base condition. Additionally, as the original manufacturer, we can offer various options depending on individual requirements, such as: - Upgrades for energy optimization - Integration with KraussMaffei digital products (where applicable) - Plasticizing retrofits - Optional: Organization and provision of delivery (Not included in price) - Optional: Installation and commissioning (Not included in price) With us, you benefit from first-class service and also have the opportunity to purchase your desired spare parts packages for wear parts to ensure uninterrupted production with your new pre-owned system. Do not hesitate to contact us with your inquiry!

Kondisi: baik (bekas), Tahun pembuatan: 2009, Spannkraft: 90 t Schraubendurchmesser: 30 mm Typ: Mehrteilig Kdedpfsy Duaasx Afiek Antrieb: Hydraulisch

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Engel e-Motion 740/280 T WP with TecnoMatic Robot / All-Electric Machine / Operating hours: approx. h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 50 mm Shot weight: approx. 360 g Injection pressure: 1,900 bar Dosage volume: 393 ccm Clamping Unit: Clamping force: 280 t Tie bar spacing: 780x780 mm Platen dimensions: 1,100x1,100 mm Ejector: electric Clamping unit: toggle lever Control: CC 300 - Touchscreen Ksdpfxjy Dqr Se Afijdk Additional equipment: Production line with TecnoMatic robot Machine in very good technical condition All-electric machine: energy-efficient and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 4 Hot runner control x 64 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor with inverter drive - energy-saving Central lubrication Parallel movements Automatic mold height adjustment TecnoMatic Medium Robot Year of manufacture: 2020 6-axis robot: all axes driven by servo motors (electric): X, Y-telescopic, Z, A, B, C Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 17,200 kg Length/Width/Height: 7.37x2.10x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Kondisi: sangat baik (bekas), daya: 16.000 kW (21.753,92 hp), jenis bahan bakar: diesel, berat keseluruhan: 14.000 kg, Tahun pembuatan: 1998, jam operasional: 622 h, tegangan keluaran: 400 V, daya nominal: 1.600 kW (2.175,39 hp), daya nominal (semu): 2.000 kVA, frekuensi keluaran: 50 Hz, kecepatan rotasi (maks.): 1.500 rpm,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E robot / Machine in very good technical condition Year of manufacture: 2001 Injection Unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1,834 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 275 t Tie bar spacing: 0x0 mm Platen size: 1,050 x 900 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional Equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-bar-less design Hydraulic core pull x 3 Control with hot runner zones x 16 Injection unit hardened – bimetallic Machine has been serviced regularly by authorized Engel service Dimensions: Kdjdpfxjy Dqr Es Afijk Weight: 20,000 kg Length/Width/Height: 7.10 x 2.15 x 2.30 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Engel Victory 1350/260 Tech Ecodrive including Engel Viper 20 robot / Hybrid Machine Year of manufacture: 2011 Injection Unit: Screw diameter: 65 mm Shot weight: approx. 810 g Injection pressure: 1200 bar Plasticising volume: 900 ccm Clamping Unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 – touchscreen Additional Equipment: Production line with Engel Viper 20 robot Machine in very good technical condition Tie-bar-less hybrid machine: energy-saving and very quiet Air valves x 6 Hydraulic core pull x 2 on the fixed platen side Hydraulic core pull x 2 on the moving platen side Hot runner control x 18 Injection unit is wear-resistant and corrosion-resistant Main motor powered by a servo motor with frequency inverter – energy-efficient Proportional valve on injection unit – precise injection Engel Viper 20 robot Year: 2011 6-axis robot: 4 axes driven by servo motors (electric): X, Y, Z, B (rotation); axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt and Engel brand safety enclosure Kjdpfx Ajy Dqrxsfiodk Optional purchase of robot and conveyor belt at extra cost Dimensions: Weight: 19,400 kg Length/Width/Height: 7.06x2.03x2.30 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests can be provided for the selected machine or you can participate in live technical tests at our company in Łódź. Price: On request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1620 g Tie bar spacing (vertical): 900 mm Kdodova H Amspfx Afiek Tie bar spacing (horizontal): 900 mm Shot volume: 1779 cm³ Injection pressure: 1855 bar Platen dimensions: 1300 x 1200 mm Type: Horizontal Drive: Hydraulic

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of manufacture: 2011 Kedpfx Afey Dqrlsisdk Injection unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping unit: Clamping force: 260 t Tie bar distance: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet 8x air valve on fixed platen side 2x hydraulic core pull on fixed platen side 2x hydraulic core pull on moving platen side 18x hot runner control circuits Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor with inverter drive – for energy savings Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B [rotation]) driven by servo motors (electric), axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel branded safety housing Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg L x W x H: 7.06 x 2.03 x 2.30 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical test of the selected machine or to participate in live technical tests at our facility in Łódź. Price: Upon request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Engel Victory 1050/220 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of manufacture: 2011 Injection unit: Screw diameter: 55 mm Shot weight: approx. 480 g Injection pressure: 2053 bar Dose volume: 511 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 0x0 mm Platen size: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 20 robot Machine in very good technical condition Operating hours: 38,188 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 4 on the fixed platen side Hydraulic core pull x 2 on the fixed platen side Hydraulic core pull x 2 on the moving platen side Hot runner controller x 12 Injection unit is wear-resistant and corrosion-proof Main motor of the machine - servo motor driven by inverter - energy-saving Proportional valve on the injection unit – precise injection Kodpfxoy Dqpqs Afijdk Engel Viper 20 Robot Year of manufacture: 2011 6-axis robot: 4 axes driven by servo motors (electric): X, Y, Z, B (rotation); Axes A and C – pneumatic Safety package for the robot Robot with Engel brand adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 12,200 kg Length/width/height: 5.66x1.88x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, berat keseluruhan: 5.000 kg, jenis bahan bakar: diesel, daya: 455 kW (618,63 hp), arus keluaran: 820 A, tegangan keluaran: 400 V, frekuensi keluaran: 50 Hz, daya nominal: 455 kW (618,63 hp), daya nominal (semu): 570 kVA, daya semu kontinu: 570 kVA, panjang total: 4.500 mm, lebar total: 1.700 mm, tinggi total: 2.200 mm, kecepatan rotasi (maks.): 1.500 rpm, produsen motor: Volvo Penta, jenis pendinginan: air, Dijual dua unit genset darurat dengan kapasitas 1000 kVA / 800 kW dalam kondisi sangat baik. Kondisi: bekas, seperti baru, berfungsi penuh, telah diuji! Daya nominal: per unit genset 1000 kVA / 800 kW Tipe mesin: MTU 16V2000 Jam operasi: 83 dan 167 jam Tahun pembuatan: 2006 Kdedsvgql Eopfx Afijk Tegangan: 400/230 V Frekuensi: 50 Hz Kecepatan: 1500 rpm Kondisi: sepenuhnya berfungsi, siap pakai, telah diuji.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Engel Victory 2460/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine / Operating hours: approx. 10,000 h in automatic mode Year of manufacture: 2021 Ksdsy Dqpkepfx Afiodk Injection Unit: Screw diameter: 70 mm Shot weight: approx. 1100 g Injection pressure: 2000 bar Dosage volume: 1212 cc Clamping Unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touch screen Additional equipment: Production line with Engel Viper 20 robot Machine in perfect technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 10,000 in automatic mode Air valve x 5 Hydraulic core pull x 2 (on the moving platen side) Hydraulic core pull x 2 (on the fixed platen side) Injection unit: wear-resistant and corrosion-resistant Main motor of the machine: servo motor driven by inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - mold pressure control Engel Viper 20 Robot Year of manufacture: 2021 6-axis robot: 6 axes powered by servo motors (electric): X, Y, Z, B, C Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 21,000 kg Length/width/height: 7.35x2.06x2.37 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Engel Victory 1050/220 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of manufacture: 2011 Injection Unit: Screw diameter: 50 mm Shot weight: approx. 395 g Injection pressure: 2,332 bar Dosage volume: 422 ccm Clamping Unit: Clamping force: 220 t Tie bar spacing: 0x0 mm Platen size: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Machine in very good technical condition Operating hours: 32,609 h in automatic mode Tie-bar-less, hybrid machine: energy-efficient and very quiet 4 air valves on the fixed platen side 2 hydraulic core pulls on the fixed platen side 2 hydraulic core pulls on the moving platen side Hot runner control x 12 Injection unit is wear-resistant and corrosion-proof Main machine motor – servo motor with inverter drive – energy saving Proportional valve on injection unit – precise injection Engel Viper 20 Robot Kedpey Dqnyofx Afijdk Year of manufacture: 2011 6-axis robot: 4 axes electrically driven by servo motors: X, Y, Z, B (rotation); axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and protective enclosure by Engel Acquisition of robot and conveyor belt at extra charge Dimensions: Weight: 12,200 kg Length/Width/Height: 5.66x1.88x2.30 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: bekas, Tahun pembuatan: 2005, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4 kN, diameter sekrup: 70 mm, Offer Details: Stock No.: 14171 Manufacturer: Engel Machine type: ES 2050 - 400 HL Year of manufacture: 2005 Operating hours: 70,000 h Control type: CC200 Screen language: German Location: D-52249 Eschweiler Clamping Unit: Clamping force: 4,000 kN Platen size (H x V): 1,400 x 1,080 mm Min. mold installation height: 350 mm Opening stroke: 1,300 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Injection Unit: Screw diameter: 70 mm Injection pressure: 1,482 bar Stroke volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection flow rate: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN Electrohydraulic Equipment: Pump motor rated power: 45 kW Dimensions and Weights: Space requirement (approx.): 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Accessories: - Vibration dampers - 2 x 24-fold water manifold - Material hopper - Degassing screw Additional equipment: - Robot interface Kdsdpou Awaljfx Afiok - 4 x hydraulic core pulls

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Engel Victory 200H/60W/180 Combi / Production Line with Engel Viper 20 Robot Year of Manufacture: 2015 Injection Unit: - Screw diameter: 22 mm - Shot weight: approx. 54 g - Injection pressure: 2,392 bar - Dosage volume: 61 cc Clamping Unit: - Clamping force: 180 t - Tie bar distance: 0 x 0 mm - Platen size: 1,020 x 980 mm - Ejector: hydraulic - Clamping unit: toggle lever Control system: CC 300 touchscreen Additional equipment: - 2-component machine with original Engel Viper 20 robot - Tie-bar-less machine, hybrid: energy-efficient, high-speed, and very quiet - Operating hours: approx. 20,000 h in automatic mode - Euromap 67 - Robot interface - 4x air valve - 6x hydraulic core pullers - Hot runner control with 36 zones - Reinforced injection units - bimetallic - Second injection unit mounted at an angle, screw diameter fi 15 mm (18 cc/2,203 bar) - Main drives: 2x servo motors controlled by inverters - Proportional valves on injection units - precision injection - Kistler sensor for mold pressure regulation - Parallel movements - The machine is equipped with an additional servo motor for mold drive - Inputs/outputs for peripheral devices Engel Viper 20 Robot Year of Manufacture: 2015 - High-speed robot, 5 axes: X, Y, Z, A, C axes driven by electric servo motors - Robot is integrated with the machine and has an additional control panel - Robot safety package - Robot with adapter and protective housing Kodpfx Afoy Dqntjiodk Dimensions: - Weight: 13,200 kg - Length/Width/Height: 5.86 x 1.98 x 2.51 m All offered machines are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in technical live tests at our company in Łódź. Price: On request