1350/250 HL

ENGEL

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 70.029 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 51561, gaya penjepit: 2.300 kN, diameter sekrup: 135 mm, tekanan injeksi: 1.600 batang, langkah pembukaan: 3.800 mm, tinggi alat: 1.890 mm, RINCIAN TEKNIS Bdjdpfx Asy T Hx Honxjc Gaya Penutupan: 2.300 kN Ukuran pelat (L x T): 2.900 x 2.500 mm Jarak antara tiang (L x T): 2.000 x 1.600 mm Tinggi cetakan minimum/maksimum: 700 mm/1.890 mm Stroke pembukaan maksimum: 3.800 mm Unit Injeksi Diameter sekrup: 135 mm Volume tembakan: 8.870 cm³ Berat tembakan (PS): 8.071 g Tekanan injeksi: 1.600 bar RINCIAN MESIN Berat bersih (dengan panel kontrol): 113 t + 18 t Jam operasi: 70.029 jam

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, Arburg 320 C 500-170 (2014) Bdodpfx Anjxqdtajxec

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 61.666 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 90 mm, diameter kolom: 175 mm, berat injeksi: 2.520 g, langkah pembukaan: 1.400 mm, The machine is in excellent condition; all hydraulic hoses were replaced in Q4 2024! TECHNICAL DETAILS Clamping force: 6,500 kN Tie bar spacing (H x V): 1,100 x 960 mm Platen size (H x V): 1,510 x 1,440 mm Mould height (min./max.): 650 / 1,150 mm Opening stroke: 1,400 mm Maximum daylight between plates: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm Injection Unit (Aggregate 5550) Screw diameter: 90 mm Maximum shot volume: 2,740 cm³ Bdsdpsy T Hfysfx Anxjc Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN MACHINE DETAILS Control system: CC200 Drive and Power Supply Installed drive power: 90 kW Barrel heating power: 56 kW Number of heating zones: 6 Hydraulic tank capacity: 1,000 l Installed drive power: 90 kW Operating hours: 61,606 h EQUIPMENT Robot: Viper 40 Core Pulls: 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (mounted on the fixed platen)

Kondisi: baik (bekas), Tahun pembuatan: 2009, ENGEL EM 440/100T Bodpfxeyktp Se Anxsdc

Kondisi: baik (bekas), Tahun pembuatan: 2008, Ref.-No.: 18643 Manufacturer: ARBURG Model: 470 C 1500-400 Golden Edition Year of manufacture: 2008 Clamping Unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar distance (h x v): 470 x 470 mm Min. mold height: 250 mm Daylight: 750 mm Injection Unit Screw diameter: 35 mm Shot volume: 154 cm³ Shot weight PS: 141 g Injection pressure: 2500 bar Dimensions and Weight Dimensions (LxWxH): 4.6 x 1.6 x 2.1 m Machine weight: 4,850 kg Additional Information & Extras Core pull: 1 unit Additional information: Communication card for ProSeS interface available (OPC-UA) Robot interface available (EUROMAP 67) The Golden Edition is a special version of the proven ALLROUNDER C-Series, featuring optimized hydraulic performance, stable process management, and outstanding reliability. This machine offers a clamping force of 150 tons and is ideally suited for the production of technical plastic components as well as applications with high quality requirements. Typical benefits of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good spare parts availability * Suitable for continuous industrial operation The Golden Edition further distinguishes itself with optimized performance and excellent value for money on the used machinery market. Thanks to its versatility, this machine is frequently used in sectors such as automotive supply, technical plastic parts, and series production. Bodpjxvy Rlsfx Anxjdc

Kondisi: baru, Tahun pembuatan: 2025, gaya penjepit: 6.500 kN, Perlengkapan: dokumentasi / manual, Spannkraft-650t-Maschine Bsdpeza Au Nefx Anxodc

Kondisi: bekas, Tahun pembuatan: 2005, Technical details: Screw diameter: 70 mm Shot weight in polystyrene: 687 g/PS Clamping force: 3,000 kN Machine weight (approx.): 19.4 t From serial production Bdodpfx Ajwftr Djnxoc Preheating unit and air-soaking unit not included in scope of supply!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 95.822 h, gaya penjepit: 1.000 kN, diameter sekrup: 40 mm, jarak antara tiang: 420 mm, volume langkah: 188 cm³, tekanan injeksi: 1.530 batang, berat injeksi: 172 g, tinggi cetakan (min.): 250 mm, Arburg 420C-1000-290 Injection Moulding Machine with Sorting Flap Number: 239 Availability: In stock Year of manufacture: 2006 Manufacturer: Arburg Screw diameter [mm]: 40 Shot weight [g]: 172 Injection pressure [bar]: 1530 Clamping force [kN]: 1000 Tie bar distance [mm]: 420 x 420 Bodpfx Ajwwi Hujnxjdc Platen size [mm]: 570×570 Min. mould height [mm]: 250 Control system: Selogica Language: German Installed power [kW]: 21.4 Operating hours [h]: 95,822 Weight [kg]: 3,700 Dimensions [mm]: 4,400 × 2,000 Feed hopper: NO Robot interface: Yes Core pull: Yes

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, 1 Bodpfx Anszatkhexodc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Spannkraft: 650 t Bsdpszaqygofx Anxedc Schraubendurchmesser: 60 mm Abstand zwischen den Stützstreben V: 960 mm Abstand zwischen den Stützstangen H: 1100 mm Schussvolumen: 890 cm³ Typ: Horizontal Antrieb: Hydraulisch

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), Minimum/maximum installation height: 200 mm / 595 mm, Opening stroke: 200 mm, Clamping force: 600 kN, Screw diameter: 25 mm, Tie bar spacing: 370 mm, Maximum injection volume: 49 cm³, Operating hours: 55,682 h. Documentation available. An on-site inspection is possible. Bdjdpfxst E Tq Ro Anxjc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, de-to-hu-Machineseeker-ENGEL-victory-650-120 Bodszbazispfx Anxedc

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, gaya penjepit: 2.700 kN, Engel DUO 36060/2700 TECH (2024) Bedpoy U Hu Refx Anxedc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 67.848 h, gaya penjepit: 700 kN, diameter sekrup: 35 mm, volume langkah: 144 cm³, tekanan injeksi: 2.000 batang, berat injeksi: 132 g, Arburg 370S-700-290 Injection Moulding Machine Item number: 232 Availability: In stock Year of manufacture: 2008 Brand: Arburg Technical data Shot weight: 132 g Clamping force: 700 kN Screw diameter: 35 mm Injection pressure: 2000 bar Tie bar spacing: 370x370 mm Platen size: 510x510 mm Minimum mould height: 200 mm Maximum daylight between platens: 600 mm Control system: Selogica Language: German Bdedpfx Aovwcbgenxsc Power: 23.9 kW Operating hours: 67,848 h Weight: 3,300 kg Dimensions: 3.8x1.5 m Hopper: No Euromap interface: Yes Air valve: Yes

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, gaya penjepit: 24.000 kN, ENGEL DUO 23060/2400 TECH Manufacturer: ENGEL CLAMPING UNIT Clamping force: 24,000 kN (2,400 t) Opening stroke: 3,200 mm Max. platen daylight: 4,000 mm Min. mould height: 800 mm Max. mould height: 2,000 mm Tie bar distance (H × V): 2,020 × 1,620 mm Platen dimensions (H × V): 2,700 × 2,430 mm Ejector force: 614 kN Ejector force with pressure plate: 1,600 kN Dry cycle time (Euromap 6): 5.4 s INJECTION UNIT Screw diameter: 150 mm L/D ratio: 25:1 Screw stroke: 680 mm Shot volume: 12,020 cm³ Theoretical shot weight (PS): approx. 10.9 kg Injection rate: 2,121 cm³/s Injection pressure (regenerative): 1,601 bar Maximum injection pressure: 1,900 bar Screw speed: 90 rpm Max. screw speed: 115 rpm Screw torque: 18,600 Nm Reduced torque at max. speed: 14,550 Nm Plasticizing capacity (3-zone screw): 235 g/s Plasticizing capacity (barrier screw): 322 g/s NOZZLE Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 10 Installed heating capacity: 97.4 kW DRIVE Installed motor power: 265 kW Hydraulic oil tank capacity: 1,600 l COOLING REQUIREMENTS Cooling capacity: 45.2 kW Water consumption (32 °C inlet): 6.6 m³/h Bdjdpey U Hphjfx Anxoc Additional features: Cores: 3+3 Heating zones: 160 Cascade control: 56