Lemari saklar

ENGEL

Kondisi: baik (bekas), Tahun pembuatan: 2015, gaya penjepit: 2.200 kN, Perlengkapan: dokumentasi / manual, 1 Ncodpfx Agjx H Awljlsl

Kondisi: baik (bekas), Tahun pembuatan: 1992, Gaya penjepit: 500 kN Diameter sekrup: 30 mm Berat: 3.200 kg Njdpfovygh Nex Aglscl Tersedia segera dari stok

Kondisi: baik (bekas), Tahun pembuatan: 1998, Diameter sekrup: 25 mm Gaya penutupan: 25 ton Jarak bukaan: 350 mm Berat: 2.900 kg Ncedpfxjvxh Iuj Aglel Langsung tersedia dari stok

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 43.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 194413, gaya penjepit: 2.200 kN, diameter sekrup: 55 mm, volume langkah: 475 cm³, tekanan injeksi: 1.578 batang, berat injeksi: 440 g, tinggi cetakan (min.): 300 mm, lintasan ejektor: 180 mm, langkah pembukaan: 750 mm, berat keseluruhan: 12.740 kg, kapasitas pemanasan: 13,4 kW (18,22 hp), Here, as a dealer specializing in injection moulding machines, we are offering the following well-maintained pre-owned injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current Note – Tax Notice and Used Machine Advantage As of July 1, 2025, used machines will also qualify for a special depreciation allowance of 30% per year. In addition to the more favourable price compared to a new machine, you can claim the same depreciation amounts as with a new machine (keyword: "Growth Booster", § 7 section 2 EStG-E). Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 cm³ - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max. platen distance: 1050 mm - Min. mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras: - Core pull Njdpfx Agjyc Ewxjlocl The machine is very well maintained and can be inspected under power. Please note: any peripheral equipment shown is NOT included in the offer! The machine is available immediately. Delivery terms: - Loaded free onto buyer's truck or free delivery to site against reimbursement of freight costs. Information about our machines and company: - We only sell machines from our own stock, acquired from active production, located at our Hanover warehouse - All offered machines are checked and tested prior to removal - We do NOT sell insolvency equipment and act NOT as brokers trading third-party property - All machines offered originate from successful companies where maintenance and care are a given - All machines offered can be inspected at our warehouse

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 4.000 kN, Perlengkapan: dokumentasi / manual, de-001 Njdpfoyctyzex Aglecl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, gaya penjepit: 1.100 kN, diameter sekrup: 135 mm, This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 11,000 kN. Take advantage of this opportunity to acquire the Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for further information. Clamping Unit • Clamping force: 11,000 kN • Opening force (with pressure pad): 760 kN • Opening force: 615 kN • Opening stroke: 2,350 mm • Min. mould installation height: 700 mm • Max. mould installation height: 1,280 mm • Max. distance between platens: 3,050 mm • Platen size (horizontal × vertical): 2,340 × 2,040 mm • Tie bar spacing (horizontal × vertical): 1,575 × 1,320 mm • Tie bar diameter: 230 mm • Max. mould weight: 30,000 kg • Ejector stroke: 300 mm • Ejector force: 230 kN • Dry cycle (Euromap 6) – Time: 5.2 s • Dry cycle (Euromap 6) – Stroke: 1,100 mm Injection Unit 1 • Screw diameter: 135 mm • Dosage stroke: 570 mm • Max. shot volume: 8,159 cm³ • Max. screw speed: 120 rpm • Screw L/D ratio (3-zone): 20 • Plasticising rate (3-zone): 166 g/s • Screw L/D ratio (barrier): 22 • Plasticising rate (barrier): 256 g/s • Injection rate: 1,255 cm³/s • Injection rate at increased pressure: 915 cm³/s • Specific injection pressure: 1,170 bar • Specific injection pressure (increased): 1,600 bar • Nozzle stroke: 950 mm • Nozzle contact force: 150 kN • Heating capacity (standard): 93 kW Nedpfex D Hd Isx Aglscl • Number of heating zones incl. nozzle: 6 • Pump drive power: 130 kW • Hydraulic oil capacity: 1,600 l Weight: • Net weight (clamping unit / injection unit): 62 t / 18 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Engel Insert 80V/80V/100 2F / 2-C Tie-barless machine, vertical / In perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Shot weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t Tie-bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Tie-barless machine with two vertical injection units, with rotary table Air valve x 6 Ncjdpfxeyctm Us Aglol Hydraulic core pull x 2 Hot runner control x 12 Infrared safety curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by authorized Engel service in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pump/Motor: 30 kW Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Engel Victory 330/110 Tech / Production line with Engel ER-HLI 41 robot and conveyor belt / Machine in very good technical condition Year of manufacture: 2004 Injection Unit: Screw diameter: 40 mm Shot weight: 190 g Injection pressure: 1670 bar Dosage volume: 201 ccm Clamping Unit: Clamping force: 110 t Tie bar distance: 0x0 mm Platen size: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Nsdpfxeyctmzo Aglocl Hydraulic core pull x 1 Injection unit hardened - bimetallic Machine serviced by authorized Engel service Machine with original safety enclosure for robot and conveyor belt Dimensions: Weight: 7,400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company premises in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Engel Victory 500/110 Tech Ecodrive with Sepro S5.15 Robot / Hybrid Machine / Operating Hours: Approx. in Automatic Mode Year of Manufacture: 2017 Injection Unit: Screw Diameter: 40 mm Ncodpfx Ageyctmuelol Shot Weight: approx. 225 g Injection Pressure: 2029 bar Dosage Volume: 251 cm³ Clamping Unit: Clamping Force: 110 t Tie Bar Distance: 0x0 mm Platen Size: 740x680 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 300 - Touchscreen Additional Equipment: Machine in very good technical condition Tie-barless hybrid machine: high-speed, energy-efficient, and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Hot runner control x 8 Hardened injection unit - bimetallic Main motor - servo motor driven with inverter - energy saving Robot Sepro S5.15 Year of manufacture: 2016 5-axis robot: 3 axes driven by electric servomotors; axes A and C - pneumatically driven Touchscreen control panel Robot with adapter and safety enclosure Robot purchase available for an additional charge Dimensions: Weight: 6800 kg Length/Width/Height: 4.90x1.50x2.00 m All offered machines are started up by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our company site in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Engel Victory 330H/200V/140 Combi Ecodrive / Production Line with Sepro Multi Inject 20 Robot / Operating hours: approx. 8,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2400 bar Metering volume: 113 ccm Clamping Unit: Clamping force: 140 t Tie-bar spacing: 0x0 mm Platen size: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Tie-barless hybrid machine: energy-saving, high-speed, and very quiet Very good technical condition, the machine operated in a so-called cleanroom Operating hours: approx. 8,000 in automatic mode Total operating hours: 12,005 h Euromap 67 Robot interface Air valves x 6 Hydraulic core pull x 5 Control with hot runner zones x 16 Reinforced injection units – bimetallic Main drives - 2 x servo motors controlled by inverter Proportional valves on injection aggregates - for precise injection Built-in pressure monitoring system by Kistler Sensor – for tool pressure measurement Screw diameter in vertical injection unit: ⌀25 mm - approx. 58 g/PS Option to purchase original Foboha rotary table at extra charge Rotary table diameter: 740 mm On both injection units, screws can be replaced by smaller or larger ones Sepro Multi Inject 20 Robot Year of manufacture: 2018 4-axis robot: 4 electrically driven axes with servomotors: X, Y, Z, B (rotation) Travel axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Robot can be purchased at extra cost Dimensions: Weight: 10,300 kg Length/Width/Height: 5.56x1.76x3.46 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our company in Łódź. Ncedpjyctmbofx Aglel Price: On request