ES 80/20 HL

ENGEL

Kondisi: baik (bekas), Tahun pembuatan: 2007, gaya penjepit: 100.000 kN, Perlengkapan: dokumentasi / manual, specs-01 Bjdpjygwg Hjfx Af Sslc

Kondisi: bekas, Tahun pembuatan: 2001, gaya penjepit: 60 kN, volume langkah: 224 cm³, tekanan injeksi: 2.224 batang, berat keseluruhan: 3.350 kg, jam kerja: 60.790 h, diameter konveyor sekrup: 18 mm, Min. die height: 15mm_Max. platens opening distance: 575+ mm Payment terms: 100% before machine takeover, net Bsdpfxjh Tk Rvj Af Solc Manufacturer: Battenfeld Model: BA600-50CDC Condition: overhauled Operating hours: 60,790 CLAMPING UNIT: - Clamping force: 60 t Opening stroke: 425 mm Min. die height: 350 mm Max. die height: - Tie bar distance (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centering (nozzle-ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Shot volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: - Core pulls: Yes Air valves: - Hot runner zones: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3.6 kW Pump drive power: 11.0 kW Total connected load: motor + heating Total weight: 3,350 kg Overall dimensions (L x W x H): 4.0 x 1.5 x 2.1 m

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 47.792 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 900 kN, 503504 Bjdpfx Afjygv S Is Selc

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 76.679 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 800 kN, diameter sekrup: 30 mm, volume langkah: 99 cm³, tekanan injeksi: 1.450 batang, panjang total: 4.050 mm, lebar total: 1.930 mm, tinggi total: 2.100 mm, berat keseluruhan: 5.200 kg, Perlengkapan: dokumentasi / manual, 503561 Bljdpfxeygv Szs Af Soc

Kondisi: sangat baik (bekas), Hello, Bljdoitcq Tspfx Af Sec We are offering used Erowa PalletSetW vices for sale. All units have been cleaned and inspected in-house. - ER-025895 Vice PalletSet W 40mm - ER-054922 Flat Vice 8mm PalletSet W - ER-055774 Vice 0-170mm A full functional test has also been conducted. The vices show minor signs of wear but are in very good technical condition. Individual purchase is possible. Spare parts are also available. If you have any questions, please do not hesitate to contact us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 70.171 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 900 kN, diameter sekrup: 38 mm, volume langkah: 38 cm³, tekanan injeksi: 2,06 batang, gaya ejektor: 40.000 N, lintasan ejektor: 130 mm, panjang pelat: 680 mm, lebar pelat: 740 mm, panjang total: 4.400 mm, lebar total: 1.500 mm, tinggi total: 2.000 mm, berat keseluruhan: 6.700 kg, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, tegangan masuk: 400 V, bentang bebas: 800 mm, Perlengkapan: dokumentasi / manual, 503415 Bsdpfxeygv Sbo Af Selc

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, 1 Bodpex Ddd Sefx Af Solc

Kondisi: baik (bekas), Tahun pembuatan: 2005, CITIZEN K12 CNC Lathe TECHNICAL DATA Max. machining diameter: 12 mm Max. machining length: 200 mm Max. retraction length: 80 mm Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Spindle speed: 15,000 rpm Max. counter spindle machining diameter: 12 mm Max. counter spindle machining length: 40 mm Max. drilling diameter for rear machining: 6 mm Max. thread diameter for rear machining: M5 Counter spindle speed: 10,000 rpm Tool station, number of tools: 8 Driven tool speed: 6,000 rpm X1 axis: 122 mm Z1 axis: 200 mm Z2 axis: 150 mm Weight: 1,950 kg SCOPE OF DELIVERY Including (not a complete list): Citizen K12 CNC Lathe Chip tray Transformer Complete operating documentation Bledpfsvrz H Rox Af Sec Exact scope of delivery as per photo series We do not accept liability for the correctness, completeness, or currency of the information provided.

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, 0001 Bjdsx Ddgmepfx Af Sslc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 3.871 h, gaya penjepit: 7.000 kN, diameter sekrup: 40 mm, tinggi total: 2.500 mm, berat keseluruhan: 20.000 kg, This Engel E-Duo 740H-740L-700 combi was manufactured in 2017. It is a robust hydraulic injection moulding machine with overall dimensions of 8.5 m x 2.5 m x 2.5 m and a total weight of approx. 20,000 kg. The machine features two 3-zone screws and 32 hot-runner control circuits. Consider the opportunity to purchase this Engel E-Duo 740H-740L-700 combi. Contact us for more information. Bsdpfx Afox D E Dts Sjlc • 2 x 3-zone screws d50 / 32 hot-runner control circuits • Maximum mould weight (total): 11,000 kg / max. mould weight per platen: 7,300 kg / max. mould centre of gravity distance from clamping surfaces: 315 mm • Clamping force (with pressure pad) kN 510 • Opening force: 130 kN • Platen size (H × V): 1,510 × 1,440 mm • Tie bar distance (H × V): 1,100 × 960 mm • Tie bar diameter: 175 mm • Max. mould weight: 11,000 kg • Injection unit 1 • Injection volume: 318 cm³ • L/D ratio (3-zone screw): 24 • Recovery rate (3-zone screw): 31 g/s • Injection rate: 281 cm³/s • Nozzle stroke: 600 mm • Heating capacity: 16 kW • Electric screw drive: 34 kW • Torque at 60% duty cycle: 903 Nm • Injection unit 2 • Injection volume: 318 cm³ • L/D ratio (3-zone screw): 24 • Recovery rate (3-zone screw): 31 g/s • Injection rate: 281 cm³/s • Injection pressure (regenerative): 2,400 bar • Nozzle stroke: 600 mm • Heating capacity: 16.2 kW • Number of heating zones incl. nozzle: 6 • Electric screw drive: 34 kW • Torque at 60% duty cycle: 903 Nm Dimensions Machine depth: 8,500 mm

Kondisi: bekas,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 98.780 h, gaya penjepit: 2.000 kN, berat keseluruhan: 12.200 kg, produsen pengendali: ENGEL, model controller: CC100, en-GB Bedoyf H Nnepfx Af Sslc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 63.929 h, gaya penjepit: 2.000 kN, produsen pengendali: ENGEL, model controller: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F injection molding machine was manufactured in 2000. It features a clamping force of 2000 kN, tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking, and rotary table control, this machine ensures precise and efficient operation. If you are looking for a high-quality injection molding machine, consider the Engel ES650H/200W-200HL-2F we have for sale. Contact us for further information. • Condition: Well-maintained and serviced • Clamping unit: • Max. mold weight: 1,500 kg • Total weight: 3,000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1,150 mm • Opening stroke: 700 mm • Daylight opening: 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A-side): 110 mm • Centering diameter (B-side): 90 mm • Locking system: Hydraulic / Pneumatic • Number of core pulls: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Shot volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1,240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle aperture: 15 mm • Installed pump: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Shot volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2,000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle aperture: 15 mm • Installed pump: approx. 6.8 kW • Controls and features: • SPC (Statistical Process Control): Yes • Print interface: Yes • 2nd injection cylinder: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Part extraction device (robot): ERC 23/1-E • Travel axes: X = 500 mm, Z = 1,400 mm • Max. mold dimensions (Y-axis): 1,000 mm • Hot runner control: 18 zones • Mold sensor technology: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No Bsdpfx Aoyf Htyjf Sjlc • Filter dryer: No

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Bedpolz Rvlefx Af Sjlc Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Engel duo 1800/500 eco drive Gaya penutup: 500 t Diameter sekrup: 70 mm Volume injeksi: 1139 cm3 Blsdsw Hbylopfx Af Sjc Tekanan injeksi: 1735 bar Jarak antar kolom V: 830 mm Jarak antar kolom H: 910 mm Tipe: Horisontal Penggerak: Hidrolik Kontrol CC300 Jam operasi: 38.000 Euromap 67 2 penarik inti Ecodrive 2 pompa Sistem penjepit cepat