Mesin cetak injeksi

ENGEL VC 330/180 tech – Duroplast

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year of Manufacture 2017) Year of Manufacture: 2017 Control Unit: CC300 Operating Hours: 565 h Availability: Immediately Clamping Unit: Clamping Force: 500 tons Opening Stroke: 1100 mm Tie Bar Distance: 1500 × 1285 mm Platen Size: 1500 × 1285 mm Minimum Mold Height: 500 mm Maximum Daylight (Open Distance): 1600 mm Injection Unit: Screw Diameter: 120 mm Screw Length (L/D): 22 D Injection Volume: 5430 cm³ Maximum Injection Pressure: 1600 bar General Data: Motor Power: 98 kW Heating Capacity: 30 kW Codpfx Absxvingehogn Clamping Unit Weight: 31 tons Injection Unit Weight: 15 tons Machine Dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core Pulls: 3 Robot Interface: No Bi-metallic Screw/Cylinder: Yes Other Equipment: STAUBLI magnetic plates, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and is part of ENGEL's modern tie-bar-less Victory series, ideal for large molds and high-precision production.

Kondisi: bekas, Tahun pembuatan: 2019, Year: 2017 Control Type: CC300 Operating Hours: 20,000 H Storage Location: MECA PLASTIC Availability: AVAILABLE Clamping Force: 160 T Opening Stroke: 460 mm Tie Bar Spacing: 520 mm x 520 mm Platen Dimensions: 760 mm x 760 mm Min/Max Mold Height: 250/600 mm Maximum Space Between Platens: 1,060 mm Screw Diameter: 35 mm Screw Length: 20D Shot Volume: 154 cm³ Max Injection Pressure: 2,000 bar Motor Power: 21 kW Heating Power: 9.2 kW Clamping Unit Weight: 8.4 T Machine Length: 5.90 m Machine Width: 1.70 m Codpfjv I Uw Ijx Abhjgn Machine Height: 2.20 m Cores: NO Robot Interface: YES Bi-metallic Screw: YES

Kondisi: bekas, Tahun pembuatan: 1991, Pressure: 650 t Passage width: 920 mm Stroke: 1750 mm Machine weight approx.: 47 t Table size: 2000 x 1500 mm Ram area: 2000 x 1500 mm Cedjfhmuvspfx Abhogn Installation height: 2100 mm Hydraulics: 203 bar Closing speed: 500 mm/min Pressing speed: 0.5 – 10.4 mm/sec Opening speed: 250 mm/sec Release speed: 0.5 – 66.4 mm/sec Return force: 150 t Total power requirement: 75 kW Space requirement approx.: 4.4 x 2.5 x 7.5 m

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 Cjdpfx Aow U N Ixobhsgn - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Kondisi: siap digunakan (bekas), de-01 Cjdpfx Abjx Ivkzehsgn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine Year of manufacture: 2011 Cedpfx Abjwqdyiohegn Robot LRX 500 Z axis: 4000 mm X axis: 1500 mm Y axis: 1250/1250 mm Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Plasticizing unit Complete plasticizing system for thermoplastics with 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping Unit - Clamping force: 8500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1600 mm - Mold height (min-max): 500 - 1100 mm - Daylight opening: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection Unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Injection volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic Equipment - Rated pump drive power: 132 kW - Dry cycle time (Euromap 6): 965 1/h - Oil tank capacity: 2440 l Weight and Dimensions - Net weight incl. control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Unit Injeksi Berat tembakan: 172 g Diameter sekrup: 70 mm Unit Penjepit Gaya penjepit: 2200 kN Csdjx Nkp Ijpfx Abhsgn Arburg 570 S 2200-800/290 ini diproduksi pada tahun 2020. Mesin ini dilengkapi dengan sistem penggerak hidrolik dan sistem kontrol Selogica untuk operasi yang presisi. Dengan gaya penjepit 2.200 kN dan diameter sekrup 40 mm, mesin ini ideal untuk pekerjaan injeksi moulding yang detail. Manfaatkan kesempatan untuk membeli mesin injeksi hidrolik Arburg 570 S 2200-800/290 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Injeksi Moulding

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 6500 kN Max. mold opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Csdpfxsx Hzzcs Abhogn Clamping platen (H x V): 1520 x 1470 mm Clear width between tie bars (H x V): 1000 x 930 mm Mold opening stroke: 1150 mm Minimum mold installation height: 600 mm Max. daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/back: 95 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection flow rate: 690 ccm/s Screw speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated drive power, pump motor: 90 kW Installed heating capacity: 50 kW Heater zones, barrel: 7 Dimensions and weight: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Anti-vibration elements - Krauss Maffei Robot LR300 X: 1200 mm, servo motor driven Y: 1000/1000 mm, telescopic, servo motor driven Z: 3500 mm, servo motor driven C: 0 - 90°, pneumatic - Conveyor belt - Safety enclosure Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 x hot runner zones - 2 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 58.350 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 60 mm, Clamping unit: Clamping force: 3000 kN Max. mold opening force: 160 kN Movable platen opening force: 86 kN Movable platen closing force: 68 kN Clamping platen (H x V): 995 x 1050 mm Clear space (H x V): 630 x 630 mm Mold opening stroke: 820 mm Min. mold installation height: 330 mm Max. opening width: 1150 mm Ejector stroke: 200 mm Ejector force forward/back: 58 kN Injection unit: Screw diameter: 60 mm L/D ratio: 21 Injection pressure: 2000 bar Stroke volume: 679 ccm Cgjdpfjw H Rvijx Abhsn Shot weight (PS): 618 g Injection flow rate: 325 ccm/s Screw speed: 259 rpm Plasticizing rate: 58 g/s Nozzle contact force: 110 kN Electrohydraulic equipment: Rated pump motor power: 45 kW Installed heating capacity: 23 kW Cylinder heating control zones: 6 Oil capacity: 720 l Dimensions and weights: Space requirement approx.: 6.20 x 2.20 x 2.40 m Total weight: 14,370 kg Max. mold weight: 3,430 kg Accessories: - Oscillation elements - 8-circuit water manifold Additional equipment: - 1 x air valve - 2 x core pulls - 8 x hot runner control zones - Robot interface according to Euromap 12

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, The equipment was ordered but was never integrated into the production line, meaning it has never been used in serial production. The system was designed to feed a small cap for a sensor clip. Lanco Integrated Linear feeder at the output: Type LF28 / 4.5–5.5 kg Vibratory feeder VZ: VZ 500 Z-L (vibratory bowl feeder) Control unit SV2-2-8z (OKU identification no.: 14420) Documentation available in paper form Cedpfxjv Uqm So Abhegn Original purchase price was €20,000.