Instalasi pengolahan air limbah

ENVIRO-CHEMIE 500 M

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Ljdpsuxfupefx Aateab Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.050 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 520 mm, kecepatan rotasi (maks.): 12.000 rpm, CNC control Heidenhain TNC 430 32-station tool changer Coolant system 2x chip conveyors Touch probe The total X-axis travel distance is 2050 mm, which means you can mill up to 2 meters in one pass. A partition wall is included. When the partition is installed, the X-travel is divided accordingly. Technical data / technical details: Lodpfx Aou Hf Ryoatsab X-axis travel: 2050 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Spindle taper: SK40 Spindle speed range: 12,000 rpm Number of tool slots in changer: 2x 32 Spindle drive power: 36 kW Weight approx.: 12,800 kg Technical data, accessories, and machine description are non-binding.

Tahun pembuatan: 2026, Kondisi: baru, VKM - Package Singulation for Milled Timber Ledpfx Aaeg Rxhgstjab With the singulation of milled timbers, whether loosely stacked or bundled, already milled timber can be processed further in a cost-effective manner. In a two-stage process, the timber is singulated for subsequent processing. It is also possible to automatically feed the singulated timber into a continuous process. The feeder is mechanically designed to reliably process even warped timber. Furthermore, it can be adjusted to the diameter of the timber to ensure that only a single piece is transported at a time, preventing blockages or downtime further along the processing line.

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Center height 175 mm Space requirements approx. 3.6/3.5 m As a world-leading company in the field of Kellenberger – Overhaul / Retrofit, we are not only able to deliver the machines in as-new condition with warranty, but can also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper, optionally with fine adjustment - Grinding spindle head T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - B-axis high resolution - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP Control (sensor on the grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - Ultra-precise, high-stiffness workpiece spindle head - Measuring control - Extraction unit - Paper band filter Lajdpfxeuwv H Ho Aatsb Control: Basic grinding cycles: - Zeroing workpiece with Z-Pos (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Diamond dresser measurement - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (B-axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Tahun pembuatan: 2024, Kondisi: baru, Overband plate magnet with cleaning mechanism Design: stainless steel VA 1.4301, fully welded Includes cleaning drawer Dimensions: 800 x 500 x 180 mm 4 x M16 lifting eyes on the rear side These two lifting magnets were previously used by one of our customers as 'police magnets' in the meat processing industry. Both overband magnets are in excellent condition. The stated price applies to one unit. Currently, 2 units available for immediate delivery from stock! All information subject to change, only while supplies last! Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator Our core competence is providing customers with exactly what they truly need. We work together with our customers to develop customized, individual solutions and deliver corresponding systems from our own production. Please feel free to contact us by phone as well to find a suitable solution for your application. Overband plate magnet Design: stainless steel VA 1.4301, fully welded Includes cleaning drawer Laedpfehfwmdsx Aateb 420 x 420 x 200 mm 420 x 420 x 250 mm 620 x 420 x 200 mm 620 x 520 x 200 mm 800 x 500 x 200 mm 800 x 520 x 250 mm Fully welded stainless steel housing to protect the magnet core Lifting eyes for suspension Cleaning drawer for easy removal of collected foreign material. Suitable for installation above all types of conveyor systems...

Kondisi: bekas, Tahun pembuatan: 2017, Grinding length 1500 mm Centre height 180 mm Machine weight approx. 3.9 t Ledjwm Rqgopfx Aatsab Required space approx. L: 4900 x 1650 x 1800 mm

Kondisi: bekas, Tahun pembuatan: 2020, nomor mesin/kendaraan: 031EP-2020, 24558 Technical Data: - Abrasive diameter: 150 mm - Grinding unit pivotable on articulated arm Lasdpfevazz Dsx Aatsb - Swivel radius of grinding arm: 2000 mm - Motorized dust extraction - Disc speed steplessly adjustable: 800 – 2200 rpm - Table dimensions: 1500 x 880 mm - Table height: approx. 920 mm - Drive: 400 V / 3.6 kW - Space required: approx. W 1600 x H 1600 x D 1600 mm - Weight: approx. 250 kg

Kondisi: bekas, EN: Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0–40 mm / Ø Continuous feed: 0–40 mm / Ø Table swivelling range: ±6.5° Table longitudinal travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece max. weight (unsupported): 130 kg incl. clamping Maximum transverse movement: 270 mm Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight: approx. 3.05 t Space requirement: approx. 4 x 2 m Overhauled according to Kellenberger guidelines Including new, state-of-the-art and future-proof CNC control. Photo shows a machine already delivered with special options. - Operation via touchscreen panel is extremely user-friendly. - The icons on the control panel are practically identical to the original control, so no re-training is necessary. - Diagnostic function with display of PLC messages and digital I/O - Infeed dressing function can be extended or modified as per customer requirements. Laedpfouxftrex Aatob - Optional indexed spindle stop for the workpiece spindle available. - New maximum infeed travel: 40 mm (can be further increased on request). - Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment not possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories on request. Machine is equipped with an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal feed and rapid traverse. Highly versatile for external and internal cylindrical grinding, or for external, face and internal grinding of single parts in a single clamping. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - In-process measuring control Please note: At present, the machine does not comply with the essential safety and protection requirements as required under BetrSichV 2015 (German Ordinance on Industrial Safety and Health). An increase of the minimum required safety target must be determined through a risk assessment in accordance with BetrSichV.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Container volume: 350 l, permissible operating pressure: 6 bar, permissible operating temperature: 90 °C, motor manufacturer: Röchling, motor type: A3, fluid grease quantity: 1 kg. Laodpet R Trxefx Aateb

Kondisi: siap digunakan (bekas), Saringan drum Terra Select. Lubang saringan 50 mm. Lodpfx Aaevnmcvstoab