High Lift stacker

EP ES12-12WA

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Dedpfxoiidm No Aavskw Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Tahun pembuatan: 1996, Kondisi: sangat baik (bekas), Automatic dual-table slot mortiser with oscillating tips BALESTRINI 2CAP Maximum tenon length: 120 mm Dodpfx Aogmucpoavokw Maximum mortise depth: 80 mm Spindle speed: 9,000 rpm Spindle motor: 3 Hp Oscillation motor: 1 Hp Pneumatic workpiece clamp Overall dimensions: 1000 x 900 x 1250 mm Weight: 500 kg

Tahun pembuatan: 2001, Kondisi: baik (bekas), I am selling a Costa SA2 TS 1350 wide-belt sanding machine, year of manufacture 2001. Configuration: electronic segmented pad and brush head. Working width: 1350 mm. Belt dimensions: 1380 x 2620 mm. Pressure rollers for short workpieces. Compressed air cleaning for both units. Total weight: 2600 kg. 1 motor, 11 kW. Final cleaning unit with extraction. Documentation included. Condition: good. Available immediately. Dkodpfx Aog Trufoavjw

Tahun pembuatan: 1998, Kondisi: bekas, COPY-BAND SAW WITH NUMERICAL CONTROL MZ MODEL UNIDUE 013 CNC - USED - NUM control system Djdpeimwtrsfx Aavokw - 3 CNC axes - cutting section: 1300 x 800 x 100 mm (height) - cutting angle: +/- 90° - wheel diameter: 900 mm - voltage: 380V/50Hz - serial no.: 06 - CE certified (year 1998)

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), An on-site inspection is possible. Dkodoqvnmbepfx Aavew

Kondisi: baru, Tahun pembuatan: 2025, Spindle swiveling: +45.5° to -45.5° Height adjustment: electric Swivel adjustment: electric Fence adjustment: electric Height display: digital Swivel angle display: digital Spindle fence display: digital Spindle diameter: Dodpfxeiqg N Ne Aavokw Speeds: stepless from 900 – 12,000 rpm Power input: 7.5 kW Motor brake: Yes, automatic Extraction connection: 3 x 100 mm, 1 x 120 mm Machine length: 2540 mm Machine width: 1195 mm Weight: 950 kg

Kondisi: baru, Typ R-RP630 Arbeitsbreite: 630 mm Minimale Werkstücklänge: 500 mm Dodpfx Aajdflp Ijvekw Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 20,25 kW Motorleistung erste Aggregat: 11 kW Motorleistung zweites Aggregat: 7,5 kW Vorschubmotor: 1,5 kW Hubmotor: 0,25 kW Walzendurchmesser erste Einheit: 190 mm Walzendurchmesser zweite Einheit: 190 mm Schleifbandmaß: 650 x 1920 mm Arbeitsluftdruck: 0,6 MPa Absaugleistung: 8.000 m³/h Transportmaße (L x B x H): 1.900 x 1.200 x 2.100 mm Gewicht: 1.200 kg

Kondisi: sangat baik (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a machine line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 Working width (min/max) mm: 225 - 3,000 Control/Software: Power Control PC 22 – Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam spacing (mm): 400 SIZING (for each side): Dkedpsp N D Ngjfx Aavjw - Protective cutter (pre-milling): 1 x 4.5 kW - Chipping cutter KD 11 (2 x 6.6 kW) EDGE BANDING SECTION (for each side): - Gluing unit (hot-melt glue + premelter): A3 + SERVO - Edge pressure zone “A” - Edge magazine for rolls (magazine slot no. 2) - End trimming unit HL 84 (2 x 0.22 kW) - Pre-milling unit (2 x 0.55 kW) - Milling unit 2 x 0.4 kW - Profile milling unit (copy) FF 12 (4 motors x 0.4 kW) LEFT SIDE: 2 x universal milling units (electropneumatic control) UF 11 (4 kW x 2) 0°-90° RIGHT SIDE: 1 x universal milling unit (electropneumatic control) UF 11 (4 kW x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + polishing unit) FA 11

Kondisi: bekas, Tahun pembuatan: 2013, Numerical control PC (office) with Widge Plus software Machine suitable for first and second panel pass Motorized mobile shoulder opening via N.C.: 3200 mm Panel width min - max: 215 - 3200 mm Dkedok Egvdepfx Aavew Panel height min - max: 10 - 60 mm Edge thickness in coil min - max PVC-ABS: 0.3 - 3 mm Continuously variable feed speed: 10 - 40 m/min Motorized pressure rubber belt Support track with retractable pins Pin height: 12 - 18 - 25 mm Distance between retractable pins: 500 / 400 mm Working units mounted on NC-motorized top tables Squaring section consisting of (per side): - Anti-adhesive unit - Time-controlled splinter protection system - Double chipping unit Edge section consisting of (per side): - Gluing system with premelter for PUR adhesive and premelter for EVA adhesive - Edge pressure rollers electronically controlled by N.C. - Edge holder magazine with 6 positions - Trimming unit with two motors - Overlapping cutting unit - Staggered finishing unit with two electronically NC-controlled motors - Rounding unit with 4 motors 0-90° tilting planing unit, electronically CN-controlled (mobile shoulder) 0-90° tilting milling unit + double stacked milling spindle (fixed shoulder) Anti-adhesive units Edge scraper unit Glue scraper unit Brushing unit Phon unit

Kondisi: baru, Typ: RP630 Arbeitsbreite: 630 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe/Dicke: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Installierte Gesamtleistung: 9,25 kW Aggregatmotor: 7,5 kW Vorschubmotor: 1,5 kW Hubmotor: 0,25 kW Walzendurchmesser: 190 mm Dkedpfx Aaofhnx Novsw Schleifbandmaße: 650 x 1920 mm Betriebsdruck (Druckluft): 0,6 MPa Absaugleistung: 4000 m³/h Transportabmessungen: 1200 x 1750 x 2400 mm Gewicht: 1100 kg