Pasta cetakan dan edgebanding

HOMAG KFL 326/C

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Complete plywood panel production line including: - 1 BUERKLE lay-up line, year 1991, with BUERKLE roller gluer (length 3400 mm) + 1 OLM longitudinal conveyor + 1 OLM cross-feed conveyor + 1 assembly table. - 1 press loading rack with 10 positions. - 1 BVH 10-level hot press with oil-heated platens: • Platen size: 3700 x 1900 mm • Platen thickness: 40 mm • Daylight opening between platens: 75 mm • 1 central cylinder, diameter 700 mm, max. hydraulic pressure 315 kg/cm² - 1 press unloading rack with side discharge pushers on an elevating table. Iedpfxeul Uizs Aa Njal Line currently in operation, available second half of 2025.

Kondisi: baru, Tahun pembuatan: 2025, Firebox output: 510 kW Operating output: 407 kW New unit, originally packed: Yes Flue diameter: 250 mm Hot air distribution ducts: 4 x 350 mm Firebox length: 1900 mm Firebox width: 900 mm Firebox height: 900 mm Airflow rate: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Heatable area: 1,800 m² Oven height without hot air ducts: 3,000 mm Iodpfx Aek Utrwsa Nsal Oven width: 1,220 mm Oven length without flue gas fan: 2,700 mm Weight: 1,575 kg

Kondisi: sangat baik (bekas), Single-Sided Destacking Station - Upper traverse horizontally movable by 180° - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Sliding front safety guard - Separate control cabinet and operator panel - External roller conveyor for stack of sheets from the destacking unit - External powered roller conveyor from destacking unit, also with belt for transferring sheets at 90° - Operating capacity (cycles/min): 12–15 - Sheet thickness (min/max) mm: 10–40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10 Iaodpfxecggy So Aa Nel

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° Iodedfgg Iepfx Aa Njal G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.

Kondisi: bekas, Tahun pembuatan: 2013, Venjakob Perfect Spray Coating Line: - Manufacturer: Venjakob - Year of manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped configuration with 180° transfer Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space for sanding machine (optional) 3. VEN SPRAY PERFECT automatic spray machine, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180° transfer station with nozzle dryer 7. Fresh air supply unit for transfer station, 25,000 m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm Iaodpfx Aaou Afu Rs Nol 4 IR emitters 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge section, belt from UV dryer 13. Hall supply air unit, 30,000 m³/h Further information: On request

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30 Iasdofi Tg Hspfx Aa Nol

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available - Isdpfeiidm Nsx Aa Nsal

Kondisi: baru, Tahun pembuatan: 2026, Penyusunan sistem penanganan korpus untuk pembuatan lini perakitan korpus manual, semi-otomatis, atau otomatis penuh selalu dilakukan sesuai dengan permintaan pelanggan. Iaodpedx R D Defx Aa Nel Kami dengan senang hati akan menjelaskan kepada Anda tentang lini perakitan korpus yang memudahkan pekerjaan Anda, mengurangi waktu pengaturan, serta meningkatkan kapasitas produksi dalam percakapan pribadi.

Tahun pembuatan: 2011, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), including the following components: 1. HOWIAL Tilt Destacking System - SH/4t - 1.75x1.75x6.00m - 4t – shortest length 2.50 m, semi-automatic package separation. For tilting the timber stack up to 45°. Electro-motor drive. Max. stack dimensions 1.75 x 1.75 x 6.00 m. Max. stack weight 4 t. Shortest timber length 2.5 m. 2. HOWIAL Lamella Separator VE 1 to crosscut saw. With pneumatically controlled tongues, on which material marked for defects is placed onto the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measuring, control and recording system for automatic acquisition and control of wood moisture using the impulse measuring method based on the electrical resistance principle. 4. Gann DMT-8 Digital wood moisture measuring, control, and recording system for automatic acquisition and control of wood moisture by impulse measuring based on the electric resistance principle. System installed in a large control cabinet, complete with inkjet printer. 5. HOWIAL Crosscut Saw AS-30 B Pneumatically controlled under-table crosscut saw with 2 automatic feed units, automatic crosscutting. Special photo cell control for detection of fluorescent line marking. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Max. feed speed approx. 60 m/min 6. HOWIAL Belt Conveyor for cutoff waste, with profiled belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/s 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. transverse transport, conveyance to finger jointing system. Powered by round belt, all rollers driven. Cross-transfer chain conveyor. Eject ± moisture right, transport speed adjustable up to 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm Iajdpfx Asi Ezx Dja Nol 8. Compact Finger Jointing Machine Cook Bolinder The technical data are original from Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Input lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger joint profile 15/15 Spindle speed approx. 6000 rpm Total electrical connected load approx. 62 kW Machine weight approx. 9 tons Gluing: OEST comb system for PU Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical Data: Height: 920 mm Length: approx. 12,000 mm 10. Safety fence panels including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Bearing distances freely adjustable, mounted measurement scale, automatic calculation of support distances in the software. Fully automatic test sequence by mouse click via PC (PC not included). Alternatively, the test process can be operated via front panel keys. Connection to any standard PC or laptop (Win 2000/XP) via supplied RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Kondisi: sangat baik (bekas), twosided single machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm 0.3 / 3 Edge thickness with strip veneer (min/max) mm 3 / 10 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, no power transmission bar (Master & Slave systems) Retractable reference stops, spacing (mm): 1080 PROCESSING UNIT (for each side): Protective milling unit (pre-milling) 75.186 (1 x kW 4.4) Chipper unit (2 x kW 8) Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue) 283.1513 04.1570 + 283.205 Edge pressure zone - edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multi-function unit (radius milling and profile milling) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Iajdpfx Aed Nt Rqoa Nel Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°