Mesin cutting plasma

EP-SYSTEMS M 40.60

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Trafo distribusi kering kering, 3 unit, 2000kVA, produsen SGB Jerman, rasio tegangan 22000 (± 2 x 2,5 %) /400V, Dyn1, IP31 atau IP00, Al/Al, unit evaluasi suhu, berfungsi, kondisi fungsional. Ljdolpd Tcepfx Aahsak

Kondisi: bekas, System: Inclined Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on medium Design: Robust, high-performance construction Material: Stainless steel on container frame, 30' container, scraper plates in PP (polypropylene) Dimensions (LxWxH): 7580 x 2435 x 3000 mm Weight: approx. 8,000 kg Principle: Wastewater is fed into the inlet of the inclined clarifier and flows downward. Due to the arrangement of the lamella plates in the clarifier, the wastewater is redirected underneath the plates and flows upward through the lamellas. As a result, solids settle down onto the lamella plates. The clarified water is transported to the outlet. Solids on the lamella plates gradually slide down along the plates, where the sludge hopper is located. Lodpfxjppyhto Aaheak Rake Mechanism: Optionally, we offer the inclined clarifier with a rake mechanism to keep the sludge fluid. Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a pre-stage before filter presses or decanters for thickening. Pre-thickening of thin sludge allows the filter press to be sized smaller in terms of filter area. The system is in good condition and available for rent or sale. Inspection at our plant is possible by appointment. We also offer new inclined clarifiers with a delivery time of approximately 8 to 10 weeks!

Kondisi: bekas, Tahun pembuatan: 2018, Plant: Decanter Type: Flottweg C4E-4/454 Complete Dewatering System in Container Ljdpfx Asu R Icmjahjak Year of Manufacture: 2018 Sludge Throughput: approx. 0–40 m³/h Solids Capacity: max. 1.2 t DS/h Features: Front double door, side access door, fan heater, lighting, power sockets, etc. Bowl: max. speed 3650 rpm Drum Diameter: 470 mm System: Containerized plant with swap body system for mounting subsequent system components. Fully piped and wired, operational as a functional unit. Container Design: Frame construction, clad with sandwich panels, mounting points for swap body transport systems. Accessories: FHM PolyMix 4000SP polymer preparation unit, measuring equipment, control panel. Feed Pump: Seepex BN 52-6LS Discharge Conveyor: Dual-trough screw conveyor SS D320 Dimensions: L 7820 mm x W 2500 mm x H 3880 mm Unladen Weight: 14,500 kg Operating Weight: 15,000 kg Voltage: 400 V Current Draw: 142 A Max. Power Consumption: 70 kW Fusing: 250 A Frequency: 50 Hz Sludge Inlet: DN 100 Centrate Outlet: DN 200 Solids Discharge: Screw conveyor Further Information: see photos

Tahun pembuatan: 1986, Kondisi: diremajakan ulang (bekas), Chamber filter press, fully refurbished with stainless steel lining, 82 polypropylene (food-grade) filter plates, 30 mm cake thickness, press volume approx. 1,100 liters, filtration area 96 m², fitted with new filter cloths, max. feed pressure up to 15 bar, closed outlet via 2 diagonal corner ports, automatic plate shifting and filter cloth washing system in stainless steel, high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with raised support frame (stainless steel), control cabinet Ledpfx Aaen Dw Nkehoak

Kondisi: baru, The bSander 75.200 & 150.200 are industrial belt sanders designed for grinding tube ends and profile edges, for edge sanding, and for face sanding on the top surface of the machine. bSander 150.200: Belt dimensions: 150 x 2000 mm Belt speed: 29 m/s Drive power: 4.0 kW // 3x400 V // 50Hz Dimensions (L x W x H): 700 x 530 x 1130 mm Weight: 90 kg bSander 75.200: Lodpfx Aod Dp Aaoahjak Belt dimensions: 2000 x 75 mm Belt speed: 29 m/s Drive power: 3.0 kW // 3x400 V // 50 Hz Dimensions (L x W x H): 700 x 490 x 1130 mm Weight: 72 kg Price on request

Kondisi: baru, Tahun pembuatan: 2023, Standby power 20 kVA (16 kW) Full load 17.5 kVA (14 kW) Voltage 230/400V Generator output 16 kW Ledpfx Aoi Nthqsahsak Continuous generator power 14 kW Number of phases 3 ECU adjustment Tank capacity 60 l Liquid cooling Frequency 50 Hz Speed 1,500 rpm Engine type: inline engine, 4-cylinder, naturally aspirated Bore and stroke 98 x 105 mm Displacement 3.2 liters Oil capacity approx. 3 l (between min./max. on dipstick) Coolant capacity approx. 5 l Diesel fuel Compression ratio 17.2:1 Central DATAKOM D300 Insulation class (generator) H Number of windings (generator) 12 Degree of protection (generator) IP23 Shunt excitation type Voltage regulation (alternator) +/- 1% Overall dimensions (L x W x H) 2000 x 900 x 1070 mm Exhaust standard EURO III Weight 730 kg

Kondisi: baik (bekas), Spectro CIROS CCD water analysis device - Height: 105 cm - Width: 150 cm Lajdpfjfiqn Uex Aahjk - Depth: 75 cm Good condition, fully functional, can be inspected and tested on site. International shipping available. Inspection: Please note that, to avoid misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before purchasing to avoid any ambiguities. For general inquiries or to arrange a viewing appointment, I am available at the phone number listed below at any time. Subject to prior sale and errors in description. VAT will be shown separately on my invoices. Shipping via freight forwarding company.

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 550 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 36 m/menit, produsen pengendali: Siemens, model controller: 828D + Shopmill, tinggi total: 2.560 mm, panjang total: 2.350 mm, lebar total: 2.160 mm, lebar meja: 550 mm, panjang meja: 1.000 mm, beban meja: 800 kg, berat keseluruhan: 4.300 kg, kecepatan spindel (min.): 100 rpm, kecepatan spindel (maks.): 10.000 rpm, pasokan pendingin: 20 batang, jarak dari tengah meja ke hidung spindel: 700 mm, hidung spindel: SK 40, jumlah slot dalam magazin alat: 30, panjang alat: 300 mm, diameter alat: 76 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Travel paths X/Y/Z: 850/550/550 mm Max. speed range: 10,000 rpm Drive power AC (40%): 13.5 kW (Siemens) Vertical tool magazine for 30 tools Tool holder: SK 40 Rapid traverse X/Y/Z: 36/36/36 m/min Including equipment such as: - Preparation for 4th & 5th axis - Robust roller guides on all axes - Spindle cooling system (oil cooling) - Fast double-arm changer with pre-selection and vertical magazine for 30 tools - Hinged belt chip conveyor - Coolant through the spindle with 20 bar high-pressure pump - Air blow-through via the spindle - Coolant pistol Ledpodkh Tiofx Aaheak - Mobile electronic handwheel Upon request, we can offer this machine including a suitable rotary table for 4th & 5th axis. Please specify this in your inquiry!

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 260 mm, tinggi penyerutan: 170 mm, diameter spindel: 40 mm, lebar perataan: 260 mm, tinggi kerja: 170 mm, daya motor pengumpan: 4.000 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jumlah spindel: 5, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Profimat 23 E Working width: 260 mm Working height: 170 mm 5 spindles Spindle diameter: 40 mm Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW Ljdpfx Ajvgnb Reahsak 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion table Driven roller at outfeed table Supplied with tooling.

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg Laedpfx Aed Nb A Njahjk General Information / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.