Ruang suhu dengan meja getaran

Espec Qualmark T2.5 + Kompressor 99480630

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Commissioned: 2013 Control: Heidenhain iTNC 530 including HR 520 handwheel Machine Hours Power-on hours: approx. 40,700 h Spindle hours: approx. 17,100 h Spindle hours, current milling spindle: approx. 150 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool interface: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed rate X/Y/Z axis: up to 60 m/min Axis acceleration X/Y/Z axis: up to 5 m/s² The machine is currently set to the following basic values due to limited available power supply on site: Feed rate X/Y axis: up to 40 m/min Feed rate Z axis: up to 30 m/min Axis acceleration X/Y/Z axis: up to 2.5 m/s² Power data Connected load: 190 kVa Main fuse: approx. 315 A The machine can be reset to original values at any time if sufficient power supply is available. Current reduced connection values: Connected load: 130 kVa Main fuse: approx. 250 A Lhodpfx Aaewa T Hks Rjp Dimensions, weights Space requirement with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration unit - 50-position chain tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra charge: - Renishaw RMP60 radio probing system - BLUM Control NT Condition of the machine Fully functional, in very good condition. Already dismantled and in storage.

Tahun pembuatan: 1974, Kondisi: bekas, Druck: 340 t Hub: 200 mm Lhsdpfxe Du Uwj Aa Rep Tischgröße unten: 100 x 800 mm Abstand zwischen Ober- und Untertisch: - geöffnet: 510 mm (Lichte Weite) - geschlossen: 310 mm Neue Hydraulik- und Elektriksysteme

Kondisi: bekas, Tahun pembuatan: 2018, x-axis travel: 1,800 mm y-axis travel: 700 mm z-axis travel: 700 mm Control: Siemens 840 D sl op. (CELOS) Main spindle speed range: 20 – 20,000 rpm Main spindle drive power: 35 / 25 kW Max. torque: 130 / 86 Nm Tool holder: HSK-A63 Swivel range B-axis: +/- 100° Table clamping surface: 2,100 x 700 mm Max. table load (1,500) kg Number of T-slots: 7 Table diameter: 750 mm Max. rotary table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm Table height: 255 mm Rotary axis C: 360° Rotary table speed: 16 rpm Resolution: 0.001° Number of tool stations: 60 positions Tool holder: HSK-A63 Max. tool weight: 6.0 kg Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 130 mm Max. tool length: 300 mm Tool change time (chip-to-chip): 7.6 sec Rapid traverse (X/Y/Z): 40 m/min Acceleration: 4 m/s² Feed rate max.: 40,000 mm/min Feed force (X/Y/Z): 8 kN Total connected load: 73 kVA Machine weight approx.: 13.7 t Space requirement approx.: 7.5 x 6.5 x 3.0 m 5-axis CNC travelling column milling machine DMG MORI - DMF 180-7 Lhsdpfx Aaoxr Racj Rsp - SpeedMaster motor spindle - Swivel milling head (B-axis) - Rotary table integrated into fixed table - Internal coolant supply - Spindle, Y-axis, and B-axis clamping overhauled in 04/2025

Kondisi: bekas, Tahun pembuatan: 2013, nomor mesin/kendaraan: 15513, Polishing and grinding machine with versatile applications, suitable for tasks ranging from polishing high-gloss furniture fronts to grinding and polishing kitchen countertops. - Easy changeover between polishing and grinding head. - Equipped with tool head oscillation for a more uniform, higher-quality grinding or polishing surface. - With automatic part detection. Technical specifications: - Model: HBS 1600-750 (800) -100-1 - Year of manufacture: 2013 - Electrical connection: 400V, 50 Hz, 4.5 kW, 10 A - Compressed air: 5 bar - Conveyor belt: 1,600 mm x 940 mm - For rectangular parts only - Part width: 90 mm – 750 mm (without tool bridge 850 mm) - Part length: 150 mm – 2,800 mm - Part thickness: 8 mm – 100 mm (work height extension possible) - Frame dimensions: 1,600 mm x 1,200 mm - Frame height: approx. 960 mm ± 25 mm - Frame material: welded steel tubing - Superstructure supports: aluminum profiles - Belt cleaning: manual every 8 hours - Safety features: emergency stop. The machine must be enclosed with protective barriers on-site if supplied without an enclosure. - Polishing motor: 400V, 50 Hz, 0.75 kW with planetary gearbox - Controls: Siemens/Vipa S7 PLC, parameters via 7-segment displays, KEB frequency inverter - Control panel functions: ON/OFF, RESET, START/STOP, program interruption, polishing/grinding head speed, belt speed, and tool head oscillation speed - Tool bridge with polishing head, consisting of a linear profile system driven by pneumatic linear cylinders. - Without polishing shoe for polishing head - Location: in stock Lhedpfx Aaeu Afu Dj Rop PICTURES show an identical machine from the same year of manufacture

Tahun pembuatan: 2001, Kondisi: bekas, Max. pressure: 500 t, max. operating temperature: 370°C, oil-heated, oil-cooled, with secondary circuit for heat recovery, overhauled in 2014. Lhedpfx Ajdwf Dbja Rop

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Helium leak detector Manufacturer: Leybold Model: Phoenix Quadro EU Condition: As new, ready for use, unused from 2022 Lodpfx Aaot Urlrj Rohp Connection: 230V Delivery time: ex stock (subject to prior sale)

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jumlah laci: 30, Retractable Shelf for Glass Plate Storage M80-30 Year of Manufacture 2025 / Brand New We are a manufacturer of retractable shelving systems for the storage of glass plates (crates with glass) or other sheet materials (sheet metal, sintered quartz, polycarbonate, furniture panels). Our racks are entirely developed and manufactured by our company in Poland. The materials we use for our shelves are certified for durability and are subject to continuous quality control. The shelf features extendable, slightly inclined drawers. The system allows you to save up to 75% of storage space, as all compartments are installed parallel to each other and are only 10 millimeters apart. Our range includes racks in various sizes and load capacities. After consultation, we can also produce shelves with customized specifications, taking your individual requirements into account. The inclination of the compartments depends on the installation: it can be to the left or right. We particularly recommend this shelf system for glassworks, stonemason workshops, furniture manufacturers, and advertising workshops seeking to optimize their space. The racks are delivered flat-packed for self-assembly. This process is very straightforward, as our extensive experience has enabled us to design a well-thought-out product—there is no problem assembling it with the supplied instructions. Our technical support department is always available to assist. Should you prefer our technician to supervise the assembly, this can be arranged for an additional fee. TECHNICAL DATA FOR M80-30 SHELF Application: for individual glass plates 255 cm x 160 cm Maximum glass plate size: 275 cm x 170 cm Number of compartments: 30 Width of glass bearing rail: 8 cm Length of glass bearing rail: 308 cm Material on which glass rests: Wooden board 308 cm x 8 cm x 2.5 cm Lsdpfx Aoha E S Tsa Rohp Height of structure (A): 218 cm Width of structure (B): 436 cm Depth of structure (C): 317 cm Required space for proper shelf use: 27 m² Base requirements: smooth/level Number of rollers per compartment: 8 pcs Front wheel: Ø160 / reinforced polyamide Rear wheel: steel ball-bearing wheel / rolled profile Color: RAL 7040 (grey) Corrosion protection: Steel parts phosphated and powder-coated Permissible load per compartment: 900 kg Maximum load capacity of rack: 27,000 kg Inclination of compartments: to the left or right, depending on assembly Assembly time: 14 hours Number of people required for assembly: 2 persons DOCUMENTS SUPPLIED WITH THE M80-30 SHELF - Operating manual - Assembly instructions - Identification plate - Warranty: 12 months The product is supplied fully operational. Our company delivers glass storage racks within the EU and to other countries.

Tahun pembuatan: 2023, Kondisi: seperti baru (mesin pameran), Under-table press Pressing force: 300 kN Lodpskuz T Uefx Aa Rjhp Press area: 300 x 300 mm Specific pressure: 3.3 N/mm² Opening: 200 mm Heating plate: solid steel heating plate Electrically heated up to 250°C Control: Siemens S7-1200 with 12" touch panel Mechanical safety gate Data recording

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2015, rentang pengukuran sumbu X: 1.300 mm, rentang pengukuran sumbu Y: 1.500 mm, rentang pengukuran sumbu Z: 1.000 mm, berat benda kerja (maks.): 1.000 kg, jenis arus masuk: AC (pendingin udara), Mesin ukur CNC 3D berukuran sangat besar tanpa perangkat lunak pengukuran. Kontrol RC1, motor, skala pengukuran, dll. seluruhnya diperbarui pada tahun 2015 (retrofit). Dilengkapi dengan kepala putar PH10, Renishaw TP20, dan rak perubahan probe. Rangka dasar mesin dari tahun 1998. Volume pengukuran bersih: X=1300mm, Y=1500mm, Z=1000mm Kecepatan posisi 3D: 666 mm/s Akselerasi maksimum: 1000 mm/s, Resolusi: 0,5 µm MPE E 5 + 6L / 1000 Mesin saat ini berada di gudang kami. Dengan perangkat lunak pengukuran PC-DMIS 2025.1 Pro dan komputer dengan meja. Lodjpiqilspfx Aa Rjhp Berfungsi penuh.

Kondisi: sangat baik (bekas), Here we offer you a Jeol scanning electron microscope. Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope with newly developed electron optics and intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Magnification range: 5 X - 300,000 X Accelerating voltage: 0.3 - 30 kV Tungsten hairpin cathode (LaB6 cathode optional) Large fully motorized specimen stage with true eucentric tilting, incl. Graphical navigation on the specimen holder Simple specimen navigation via click-center-zoom Field-of-view-controlled navigation via two navigators Relative coordinate navigation Saving and recalling sample positions Adjustable field-of-view selection for the specimen stage Field-of-view correction during rotation via computer-controlled eucentric rotation Field-of-view correction during tilting via computer-controlled eucentric tilting Calculation of available tilt angles based on sample geometry Automatic focus tracking during Z-axis movement of the specimen Intelligent limit switches for all motorized axes Stage travel: x = 125 mm y = 100 mm z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) Secondary electron detector for high vacuum operation State-of-the-art, super-conical objective lens ensures highest image resolution even at large tilt angles Guaranteed resolution in SE image: 3 nm at 30 kV and 15 nm at 1 kV Simultaneous live image display from multiple detectors Simple specimen navigation via click-center-zoom Powerful functions for image measurement Movie function for recording dynamic processes Versatile specimen chamber with numerous expansion options: open flanges e.g. for EDX, WDX, EBSD, cathodoluminescence etc. Low-maintenance and low-wear, quiet pumping system consisting of rotary pump, vibration-free high-performance diffusion pump and electromagnetic valve control Comprehensive safety features to prevent improper operation and failure of external media Ergonomic, height-adjustable system table SEM starter kit including two specimen holders, tool kit, and six spare cathodes Additional equipment 2x MP-43100 (TMP) Turbomolecular pump Instead of the standard diffusion pump When using a turbomolecular pump, no cooling water is required to operate the SEM. Further equipment: PC for SEM control includes TFT monitor OX200 Bruker Quantax 200 EDX System EXTENDED Nitrogen-free energy-dispersive X-ray analysis system including: SDD detector with 127 eV or better energy resolution Detection of all elements from boron Vibration-free, maintenance-free, Peltier-cooled (nitrogen-free) Pulse processor TFT monitor Spectrum acquisition and element identification Fully automatic, quantitative, standardless element analysis Image capture Ultra-fast qualitative line scan Ultra-fast qualitative element mapping Data management and archiving system Report generation and results output Data communication Installation and training HyperMap Multipoint analysis Bruker xFlash detector (SDD) with signal processing unit SVE III Type: Jeol JSM-6490 Lhsdpfsmn Rcqox Aa Rop Scope of delivery: (See photos) Condition: used (Specifications and technical details are subject to change and errors excepted!) Should you have further questions, we are happy to assist you by phone.