Pengekstrak asap las ESTA

ESTA DUSTEX F-64

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 680 kW (924,54 hp), Perlengkapan: unit pendingin, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Nominal capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant content: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on operating parameters) Dksdpfevllxdex Amxon Number of fans: 5, diameter 900 mm Airflow rate: 162,500 / 131,000 m³/h Motor power consumption: 17.60 / 11.50 kW Heat exchanger surface area: Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically tested and is fully functional.

Kondisi: baru, Tahun pembuatan: 2024, The Just Lift Crane JL250 to JL750 from Just Lift has been developed to accelerate and optimize all processes related to lifting and logistics, increase productivity, and at the same time ensure maximum safety and ergonomics for the operator. - Motorized tiller head control - Arm control via remote controllers - Hydraulic lifting and extension - Standard anti-tip system - 100% electric Max. forward travel speed km/h 4.0 Max. reverse travel speed km/h 4.0 Lifting system max. load capacity kg 250 to 750 Number of operators 1 Arm lifting speed mm/s 22.00 Arm lowering speed mm/s 15.00 Arm extension speed mm/s 7.00 Arm retraction speed mm/s 5.00 System pressure bar 125.00 Oil type ISO VG 46 Oil volume l 2.00 Weight without batteries kg 610 to 1,080 Net weight incl. 105/130A AGM batteries kg 680 to 1,146 Maximum length mm 2,835 Minimum length mm 1,891 Width mm 980 Height at handle/tiller mm 1,229 Maximum height mm 3,030 Minimum height mm 2,313 Dedpoh Tx R Tofx Amxekn Maximum lifting height mm 3,010 Wheelbase mm 1,000 Turning radius mm 1,050 Currently, we can only offer brand-new machines.

Kondisi: baik (bekas),

Kondisi: baik (bekas),

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 800 kW (1.087,70 hp), berat keseluruhan: 4.500 kg, Perlengkapan: kompresor, pendingin beku, Chiller unit Trane RTUB224 Cooling capacity: 800 kW Number of cooling circuits: 1 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 Dsdpfx Amsrzq Arjxjkn Including dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is based on a water outlet temperature of +7°C with a condensing temperature of +40°C.

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Wagner powder coating system for sale! Powder coating equipment, year 2010, includes the following components: Spray Booth: Prima Cube 16000 Powder Supply: Powder Center Powder Recovery: Cyclon Filter 16000 Reciprocator: KHG 350 Production Line Configuration INCLUDES: I. Specifications: Maximum workpiece dimensions: LxWxH = 2600 x 400 x 1850 mm II. Equipment: 1. Technological Conveyor, automatic, speed V = 1.2 m/min, adjustable between 0.5–2.5 m/min Dkjdpsww Adtofx Amxjn 2. Pretreatment Tunnel MNA-3-LPG, total length 16.7 m: - Loading zone length: 2.5 m a. Washing, degreasing, and phosphating; length: 3.6 m • Number of spray frames: 10 • Number of nozzles per frame: 18 • Total nozzles: 180 • Pump capacity: 162 m³/h • Pump power: 15 kW • Process tank: 4 m³ for active solution • Integrated heat exchanger with LPG burner, 160 kW • Operating temperature: 50°C • Mechanical oil separator • Solution filter • Metering system with diaphragm pump and regulator • Washing time: 3 minutes b. Drip-off section, length: 3.1 m • Drip time: 2 min 30 sec c. Primary rinse; length: 1.2 m • Number of spray frames: 4 • Nozzles per frame: 18 • Total nozzles: 64 • Pump flow: 38 m³/h • Pump power: 3 kW • Rinse tank: 1.5 m³ • Rinse time: 1 min c. Drip-off zone, length: 3.1 m • Drip time: 2 min 30 sec d. Final rinse; length: 1.28 m • Number of spray frames: 3 • Nozzles per frame: 18 • Total nozzles: 54 • Pump flow: 33 m³/h • Rinse tank: 1.5 m³ • Pump power: 3 kW • Spare spray frame included • Nozzles per frame: 18 • Final rinse time: 1 min e. Drip-off section, length: 2 m • Drip time: 1 min 40 sec - Three exhaust connections, each with ventilator - Process chamber made of stainless steel - Pipework in PVC or stainless steel (1 unit) 3. Automatic Dryer after Washing AST-1-KLPG: - Internal dimensions (LxWxH): 7000 x 3000 x 2800 mm - Air curtains on each side minimize heat loss - One indirect heat exchanger (LPG), rated at 200 kW - Three circulation blowers, total airflow 6000 m³/h each - Two exhaust duct connections - Temperature sensor and controller - Overtemperature sensor - Airflow monitoring sensor - Chamber in galvanized steel - 200 mm thermal insulation - Drying time: 10 min (1 unit) 4. Automatic Curing Oven APT-2-KLPG for Powder Coating: - Internal dimensions (LxWxH): 10200 x 3600 x 2800 mm - Air curtain on one side to prevent heat loss - Two indirect LPG-fired heat exchangers, each 300 kW - Eight circulation blowers, 6000 m³/h each - Two exhaust duct connections - Temperature sensor and regulator - Overtemperature sensor - Circulation monitoring sensor - Galvanized steel chamber - 200 mm thermal insulation - Curing time: 25 min (1 unit) 5. Overhead Rail Conveyor System ATR-ADAX for Powder Coating Line, includes: • Straight track with hangers, length: 146 m (hanger spacing 400 mm) • Drive station: 2 units • Tension station: 1 unit • Chain lubrication station: 1 unit • Structural drawings: 1 set

Kondisi: sangat baik (bekas), Self-cleaning dust air filter Djdpfxsv Ny Emo Amxokn Air flow rate: 20,000 m³/h max design Dimensions: 4000 x 2450 x h 8000 mm (approx.) Total filter surface: 170 m² Filters: new antistatic polyester fabric Filter cleaning system: reverse-jet air with control and regulation unit Filtered dust discharge system: motorized screw conveyor, rotary valve; discharge into big-bags Electrofan: 30 kW Electrical panel: star/delta start-up (no inverter) The machine is inspected and overhauled before delivery to the user.

Kondisi: bekas, Wall-mounted slewing crane DEMAG Type KBK 2 Dsdpfxstqwrvo Amxekn Demag boom number: KBK- 982 040 44 Demag wall bracket number: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib outreach: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height from underside of jib to top of wall bracket: 1000 mm Flange plate wall bracket to centre of pin: 270 mm Total length from flange plate wall bracket to jib tip: 4330 mm - Jib profile: C-section rail DEMAG KBK 2 - Trolley for C-section rail DEMAG KBK 2 - Original yellow paint Dead weight: 170 kg Very good condition Price without chain hoist – chain hoists or cranes can also be found in our shop.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 30 kW (40,79 hp), Tahun pembuatan: 2025, DE Dksdsq Ngamopfx Amxsn

Kondisi: baru, 1 Djdpfx Aenzh Hfemxskn