Penggergajian lengkap (stasioner)

Esterer EBB-1400

Kondisi: baik (bekas), Ditawarkan penghancur rahang ganda bekas dari Krupp. Kondisi baik, sepenuhnya fungsional. 500 x 300 mm, 15 kW, peralatan baru. Mesin sedang dalam proses overhaul. Gjdpfowy U Icox Abhoin

Tahun pembuatan: 2020, Kondisi: baru, Fully assembled, ready-to-plug-in complete system mounted on a mobile stainless steel baseplate with juice pump, featuring a 63 kW Wolf oil boiler, 2 heat exchangers, holding section for approx. 20-30 seconds with automatic control unit, comprising: Heating circuit, heating circuit pump and expansion vessel, 2 plate heat exchangers for juice pre-heating/cooling and heating up to 80 °C. 24 m holding section, automatic pneumatic temperature regulation. Capacity: 5,000 l juice per hour (depending on juice inlet temperature). Giedpfx Ascx R Ddebhjn

Kondisi: bekas, Tahun pembuatan: 2008, Used drilling center by CMA Type: TRD 40 CN 9000 Table length: 9000 mm Godpfx Aewc Ndwebhsin Max. capacity: 40 mm Automatic tool changer Year of manufacture: 2008

Kondisi: sangat baik (bekas), Independent machine – universal machine (first & second position in a production line) Electronic control – EasyLing programmer Safe and soundproof enclosure No. 3+3 vertical columns for supporting the processing units Min. usable working width (mm): 240 Max. usable working width (mm): 3,100 Gsdpfx Ajwhmdfjbhein Min. usable working thickness (mm): 3 Max. usable working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), infinitely variable (m/min): 4 – 24 Total power No. 4 processing units (for each side of the machine): Scoring unit Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0–90°

Kondisi: siap digunakan (bekas), breithobelmaschine-1 Giodjwg S Tvjpfx Abhjn

Kondisi: sangat baik (bekas), Technical data: Max. planing width: 400 mm Max. planing height: 240 mm Cutter shaft diameter: 120 mm Number of knives: 4 Feed speed: 6–12 m/min Manual lifting Gjdpfxsv Rv Dbj Abhoin Extraction port: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Kondisi: baik (bekas), Sorting trolley / sorting crane Baljer & Zembrod Crane type: ASX1 Track gauge (internal): 2.5 m with cross-cut saw (has not been used for a longer period) with cutoff timber stacker with rails with cable (1 year old) Gjdpfx Absv I A Ihshjin Immediately available Location: Austria, near Villach

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Giodpovu Hfqefx Abhjn Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Kondisi: baik (bekas), Tahun pembuatan: 1991, Braun Canali Band Saw TB 1100 Unimaster Roll diameter: 1,100 mm With tilting table for diagonal cuts Dismantled and available ex our warehouse in 23936 Grevesmühlen Giodpfx Aeucnt Hsbhjn

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, Üstünkarli UDKP 160 Cutting height: 160 mm Chain bed approx. 420 mm With spikes in the chain bed Includes slat bush and spacer rings Gsdpfxsucnuds Abhoin Main motor: 75 kW