Granulasi / pembersihan cuci panas lengkap

European 600-HW

Tahun pembuatan: 2022, Kondisi: hampir baru (bekas), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 COOLING SYSTEM Like new, unused The PTUN... module is an individual drying unit for plastic material. The machine consists of the following components: • Hopper Djdsvhb S Sspfx Aaqjut • Support frame • Heating chamber • Connecting pipes • Air control valves.

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 10021711, berat keseluruhan: 1.400 kg, kapasitas angkut: 210 kg, produsen pengendali: KUKA, model controller: KRC 4, 1. Robotic Arm • Manufacturer: KUKA Deutschland GmbH • Model: KR 210 R3100 Ultra (KR210R3100 ULTRA C4 FLR) • Article number: 10021711 • Serial number: 1239324 • Year of manufacture: 04/2019 • Net weight: 1,154 kg • Payload: 210 kg • Reach: 3,096 mm • Country of origin: Germany 2. Robot Controller • Model: VKR C4 • Article number: 1106074 • Serial number: 3007941 • Year of manufacture: 10/2019 • Weight: 168 kg • Supply voltage: 3x400 V • Mains frequency: 50/60 Hz • Full load current: 22 A • Line fuse: 25 A • Country of origin: Hungary 3. Extraction Unit • Manufacturer: ESTA Apparatebau GmbH & Co. KG • Model: Kleinentstauber OM-8 • Serial number: 19002523 • Year of manufacture: 2019 • Voltage: 400 V • Power: 0.55 kW • Current consumption: 1.4 A • Noise level: 10A [dBA] • Max. Air flow rate: 600 m³/h • Weight: 60 kg • Protection class: IP44 Dsdpfov Tyw Dsx Aaqeut • Max. vacuum: 1,600 Pa • Country of origin: Germany 4. Equipment & Special Features • Teach pendant with connection cable (visible in the control cabinet) • External electric/control cabinet installation with Ethernet and safety connections (KUKA standard) • Additional attachment mounted on robot flange for special applications (e.g. grinding or deburring) • Pedestal for stationary floor installation • Control and power cables pre-assembled and integrated • System is palletised and ready for transport

Kondisi: baik (bekas), Tahun pembuatan: 2002,

Kondisi: sangat baik (bekas), KUKA Model: KUKA KR 16 R2010 / Control Unit KR C4 / KUKA smartPAD KUKA KR 16 R2010 – Industrial Robot Technical Data: Payload: 16 kg Reach: 2010 mm Repeatability: ±0.05 mm Axes: 6 Mounting options: Floor, ceiling, wall, or inclined mounting possible Controller: KUKA KR C4 (Standard) Typical Applications: - Handling & assembly - Arc welding - Machine tending - Packaging & palletizing - Pick-and-place tasks Special Features: - Flexible use in many industrial sectors - High precision and reliability Dodpfx Aaewb Ef Ujqjut - Compact design with large reach Condition: Used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Produsen: Strautmann Tipe: PP 1207 Plus Ukuran bal (PxLxT): 1200 x 1100 x 730 mm Berat bal: sekitar 400 - 500 kg Dimensi luar (PxLxT): 1850 x 1047 x 3079 mm Tinggi transportasi: 2500 mm Lubang pengisian: 1190 x 600 mm Tekanan pengepresan: 59 ton / 580 kN Kapasitas: 1 - 2 bal/jam Jumlah ikatan: 4 Berat mesin pres: 2300 kg Daya listrik: 400 V / 50 Hz Daya terpasang: 4 kW Lokasi instalasi: atap dalam/luar ruangan Tingkat kebisingan: kurang dari 80 dB(A) Tahun produksi: 2003-2005 Saya juga memiliki baler Strautmann PP 1207 tahun 2009-2011 harga 5.500 euro Juga tersedia baler Strautmann PP 1208 tahun 2014-2015 Strautmann AutoLoadBaler tahun 2018 harga 7.500 euro Dodpfx Aaev Aiymsqsut

Kondisi: bekas, PENGHANCUR POROS WEIMA POROS TUNGGAL MODEL WLK15 Dodotqd Ndspfx Aaqsut MOTOR UTAMA 90KW UKURAN PISAU ROTOR 50X50 (PISAU BARU) PANJANG ROTOR 1500MM DIAMETER ROTOR 370MM MESIN 100% BERFUNGSI SIAP DIGUNAKAN

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. Dujdpfxsvf E Avs Aaqet - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baru, Tahun pembuatan: 2025, DIE MASCHINE IST BRANDNEU Die Maschine eignet sich zum Verpressen von Aluminium- und Stahlblechdosen mit einer Materialstärke von bis zu 0,2 mm und einem Volumen von bis zu 3 Litern. Sämtliche Elektro- und Elektronikkomponenten stammen von Schneider und Siemens. Die Maschine ist vollautomatisch und verfügt über eine SPS-Steuerung sowie ein Siemens HMI Simatic Touchpanel mit Not-Aus-Tastern. Die Maschine wird mit einer Garantie von AYMAS Makina San. Ve Tic. A. S. für ein (1) Jahr oder zweitausendfünfhundert (2.500) Betriebsstunden – je nachdem, was zuerst eintritt – ausgeliefert. Je nach Einsatzgebiet ist eine Öl-Kühl-/Heizanlage vorhanden. Optional ist ein MB 500 Magnetabscheider sowie ein VH (120-250) Vibrationsdosierer erhältlich. Diese ermöglichen die Separierung von Aluminium- und Stahldosen sowie die Abscheidung von Staub- und Schmutzpartikeln im Schrott. Technische Daten: Ballengröße: 500 mm x 330 mm x ... Behältermaß (B x L x H): 500 mm x 1.000 mm x 330 mm Leistung: Bis zu 1.000 kg/h (Aluminium) Bis zu 2.000 kg/h (Stahl) Ballengewicht (mechanische Waage): 10–20 kg Taktzeit: 30 Sekunden Dujdpfxsrc Dkqs Aaqjt Deckelzylinderkraft: 25 Tonnen Hauptpresszylinderkraft: 100 Tonnen Arbeitsdruck: 225 bar Maschinenabmessungen (B x L x H): 1.100 mm x 4.200 mm x 2.600 mm Elektromotor: 18,5 kW Maschinengewicht: 5.000 kg

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Rated power: 77kW, PCU power: 30kW, extruder power: 18.5kW, motor power: 10.7kW, heating zones: 1, heating power: 12kW. Documentation available. An on-site inspection is possible. Dodpfjwty Hkox Aaqeut

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, For sale is a welding robot system with the following components: Elite Robot CS620 (1750mm reach) with programming flange and software Fronius TPSi 500 rotateZERO 500 positioner with 1800mm x 800mm intermediate frame Machine base frame Dedpfev Dvllsx Aaqjut The system is immediately ready for welding.