A pneumatikus eszköz tompahegesztéshez

EVV SV-63P

The pneumatic butt-welding machine type Sv‑63P features a robust vertical design, including vertical clamping jaws and a sliding movable plate. Clamping is accomplished via tandem cylinders, while the support plate on the static side is isolated from the main frame, which also carries the movable carriages connected to a horizontal cylinder for compressing the workpiece. The carriage movement is restricted in both directions—for compressing and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with a preset jaw distance is controlled by foot pedals. An additional control cabinet with switches and buttons allows either single or simultaneous clamping, and supports both manual and automatic welding. After welding, the clamping jaws are raised, and the carriages return to their home position. Welding parameters are set via a controller mounted laterally on the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, an energy board with a thyristor and a main control board ensure smooth operation. A compressed air maintenance unit with a pressure regulator for adjusting clamping force is mounted on the device cover. The main power switch for activating the device is located on the controller for welding parameter adjustment.
Fedpoyqr Sxefx Agdjpp

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.