Tekan rem - hidrolik

FASTI 904-125/30

Kondisi: bekas, CNC press brake FASTI type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Pressing force: 125 tons Working length: 3050 mm Stroke: approx. 335 mm Frame throat: 300 mm Clearance between side frames: 2550 mm Max. tool installation height: 465 mm (maximum opening width between tool holders) Table width: 90 mm (clamping system mounted on table) Table height above floor: 875 mm (910 mm with clamping system) Backgauge X-axis: 500 mm Backgauge R-axis: 115 mm Backgauge Z-axis: approx. 1950 mm Y-axis approach speed (rapid traverse): 90 mm/s Y-axis working speed: 8.9 mm/s Y-axis return speed: 75 mm/s Oil capacity: approx. 160 liters Motor power: 18.5 kW Power supply: 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for backgauge - backgauge depth (X-axis) - 2 axes for backgauge - stop height (Finger R1 + Finger R2) - 2 axes for backgauge - stop fingers, laterally movable (Finger Z1 + Finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electrical foot switch and two-hand control panel or two-hand control panel only - Hydraulic tool clamping system for upper tool (TRUMPF system), with 20 mm clamping groove - Hydraulic tool clamping for lower tool with 13 mm table slot, depth 21 mm (tool shank 13 x 20 mm) - FIESSLER safety light curtain, type AKAS - 2 material support arms at front, manually adjustable laterally and in height Iiedshmmfkepfx Aavsg - Electrical diagram, hydraulic diagram, and control user manual included - Control cabinet attached to machine - Sold without tooling Space requirement (L x W x H): 5000 x 2500 x 3050 mm Transport dimensions (L x W x H): 5200 x 1900 x 2950 mm Weight: 8.5 tons In good condition

Tahun pembuatan: 1999, Kondisi: baik (bekas), Driver / Plate Brake / Flying Shear for Slitting Line Strip width: 500 – 1,650 mm Iisdpfx Aogryl Ajavsg Strip thickness: 0.4 – 4 mm Number of driver rollers: 2

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Press force: 85.0 t Bending length: 2050 mm Frame gap: 1750 mm Throat depth: 410 mm Stroke: 365 mm Installation height: 535 mm Approach speed: 200 mm/sec Working speed: 1.0 - 10.0 mm/sec Return speed: 135 mm/sec Backgauge – adjustable up to max. 600 mm Table width: 120 mm Working height: 1050 mm Operating hours: 28,500 h Oil capacity: 200 l Operating pressure: 340 bar Total power requirement: 14.0 kVA Iedpfxexaa Ure Aavoig Machine weight approx.: 9,050 kg Dimensions (LxWxH): 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) only approx. 28,500 operating hours - Inspected condition - Machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - Including DELEM CNC control * Swiveling operator panel on front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized backgauge (X axis) - CNC electro-motorized height adjustment of the backgauge (R axis) - CNC electro-motorized adjustment of backgauge fingers (Z axes) - CNC pneumatic die shift (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic lower tool clamping - 1x movable two-hand/foot control - 2x front, robust support arms including “Sliding System” - Side safety devices (swiveling doors) - Rear safety devices (swiveling doors) - Bending tool storage cabinet (front right side) - Original operating manual + circuit diagram, etc. Further technical data: - Approach speed X axis: 500 mm/sec - Approach speed R axis: 300 mm/sec - Approach speed Z axis: 1000 mm/sec - Travel range X axis: max. 600 mm - Travel range R axis: max. 250 mm

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Tekanan 85 t, Panjang tekuk 2050 mm, Jarak antar tiang 1750 mm, Kontrol DELEM, Langkah 215 mm, Kedalaman leher 410 mm, Daya total 13 kW, Berat 8.750 kg, Dimensi mesin 3190 x 2100 x 2375 mm Iiodew Imq Rjpfx Aavsg

Kondisi: baik (bekas), Tahun pembuatan: 2008, used-6m-cnc-bending-press-amada Iodpsy T Hltsfx Aavsig

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, nomor mesin/kendaraan: 0304/5599, Fungsionalitas: berfungsi sepenuhnya, produsen pengendali: Delem, model controller: DA-65, lebar kerja: 3.000 mm, gaya tekuk (maks.): 105 t, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jumlah sumbu: 4, jenis mahkota: dikendalikan CNC, jenis aktuasi: hidrolik, Perlengkapan: Penandaan CE, dokumentasi / manual, sistem penjepitan alat Eropa, Crowning: Reflex - ACSG1 Daya terpasang: 11 kW Peralatan: Bisa sesuai kesepakatan. PENAHAN ALAT ATAS BARU. Ijdpfx Asxv Eafeavjig Servis terakhir: 05/2025.

Tahun pembuatan: 1992, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.323.36002, 22621 Technical Specifications: - Maximum working length: 3500 mm - Frame gap/Distance between uprights: 3050 mm - Maximum pressing force: 2000 kN - Distance table/ram (max.): 480 mm - Throat depth: 260 mm - Ram stroke approx.: 300 mm - Stroke speeds: - Downward rapid traverse (max.): 100 mm/sec - Upward speed: 80 mm/sec - Pressing speed (downward, max.): 10 mm/sec - Total drive power: 25 kW - Installation dimensions (approx.): W 4500 x H 3150 x D 2100 mm - Weight (approx.): 16,000 kg Includes: - CNC control (CYBELEC), renewed in 2008 - CNC-controlled crowning system - CNC-controlled backgauge with height adjustment, 5 - 1000 mm Iiodpfxjip Nike Aavsg - Hydraulic tool clamping - Top tool and universal die - Sheet supports - Two-hand control console

Kondisi: bekas, Tahun pembuatan: 2007, Dijual mesin punch Amada EMK 3610NT termasuk unit pemuat MP300. Mesin ingin kami jual lengkap beserta tool dan mesin pengasah Wilson X-Sharp. Tool standar tercantum dalam daftar terlampir. Dapat saya kirimkan melalui email. Ijdpfxow Hww Ho Aavjig

Kondisi: baik (bekas), Tahun pembuatan: 1998, gaya penekanan: 150 t, panjang langkah: 215 mm, panjang kerja: 3.100 mm, Machine fully rebuilt. Iisdpfx Aasuc Txzsvog New CNC: Step Automation Rock 15 (Touchscreen and 2D) Bending length: 3100 mm Force: 150 t 6 axes (Y1, Y2, X, R, Z1, Z2) Stroke: 215 mm Delivered with a complete set of 3-meter punches and dies. *Machine currently undergoing retrofit, CNC installation pending completion.

Kondisi: bekas, druck-50t-1500mm-cybelec-de-specs Iedpfx Asra Rrhjavsig