CNC press brake, mesin tekuk die, press brake, mesin tekuk pelat, mesin tekuk bangku, mesin tekuk di

FASTI 904-125/30

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Pressure: 125 t Bending length: 3050 mm Frame gap: 2550 mm Approach speed: 90.0 mm/sec Working speed: 10.0 mm/sec Return speed: 75.0 mm/sec Stroke: 140 mm Open height: 375 mm Throat depth: 250 mm Table width: 90.0 mm Working height: approx. 950 mm Operating hours: 14,100 h Total power requirement: 13.5 kW Weight: 8,500 kg Dimensions (L x W x H): 3630 x 2300 x 2505 mm Fgsdpfx Alsxabk Isysf From a maintenance workshop Good / well-maintained condition With only approx. 14,100 operating hours (!!) - Machine in inspected condition - machine video - ?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control – model “DA 58” * Swiveling control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorised back gauge (X axes) * Backgauge system with 2x CNC controlled portals - CNC electro-motorised height adjustment for back gauge (R axes) - CNC electro-motorised adjustment of stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various segmented upper and lower tools - 2x sturdy, movable front support arms - 1x freely positionable two-hand/foot operation - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - Original operating manual + control - Manufacturer’s CE declaration

Kondisi: baik (bekas), NHH lathe Swing over bed: 260 mm Swing over cross slide: 160 mm Fodpomw Ukcsfx Alyjgf Spindle bore: 26 mm Turning length: 600 mm Heidenhain digital readout Chuck diameter: 155 mm Spindle speed: 2,000 rpm Dimensions: 150x85x155 cm (LxWxH)

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, de Fjdpfx Alorq D Nieyjgf

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Fgjderigxyjpfx Alysf Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition

Kondisi: baik (bekas), Tahun pembuatan: 1962, Radial arm drilling machine, pillar radial drilling machine, bench drilling machine, radial arm drill, high-speed radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Spindle taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm Fedpfxoirax Ue Alyegf - Weight: 1500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 40.255 h, Fungsionalitas: berfungsi sepenuhnya, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in traveling column design. The machine was built in 2008 and underwent a full retrofit in 2022 with modernization to Siemens Sinumerik 840D Solution Line. Equipped with a 5-axis simultaneous operation license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel, and electronic handwheel. Technical Data: Manufacturer: DMG DECKEL MAHO Model: DMF 220 linear Machine type: 5-axis universal machining center / traveling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Full retrofit: Siemens CNC / Drive upgrade 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool holder: SK 40 Fgsdpfx Asyuzg Hjlyjf Table load capacity: 2,500 kg Main spindle speed range: 20 – 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V On hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Control panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: 5-axis simultaneous operation license Axis licenses Operator software license Equipment: Integrated swivel table / swivel bridge design Paper band filtration unit Coolant / filter unit Control cabinet Full enclosure Work area lighting Siemens operator panel Condition: Machine in well-maintained condition Upgraded Siemens control and drive technology 5-axis simultaneous operation available

Kondisi: baik (bekas), GENERAL SPECIFICATIONS Fedpfx Aljrpnf Aeyogf Max. grinding diameter: 120 mm Grinding wheel width: 250 mm Min. grinding diameter: 1 mm Regulating wheel diameter: 304 mm Grinding wheel diameter: 508 mm DIMENSIONS AND WEIGHT Height: 1,700 mm Width: 1,500 mm Length: 2,750 mm Weight: 4,000 kg ELECTRICAL SPECIFICATIONS Grinding wheel spindle motor power: 15 kW Workhead spindle motor power: 1.8 kW Hydraulic motor power: 1.1 kW Total power: 20 kW Voltage: 220/380 V

Kondisi: bekas, Tahun pembuatan: 1997, Hydraulic press brake manufactured in 1997 in England, at the EDWARDS PEARSON factory. The press brake is in good condition and is sold complete with tooling. It has always been serviced and maintained on schedule. The machine is currently connected and can be tested or inspected on site. Fgodpfx Aerfx Utolysf Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Pressing force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: automatic X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other details: Recently fitted with a new screen and keyboard for more convenient operation. If you have any further questions, we would be happy to answer them.

Tahun pembuatan: 2016, Kondisi: diremaj di bengkel (bekas), For sale is 1 hood-type dishwasher from Meiko, model DV 80.2, year of manufacture 2015/16. Condition: good, partially operated with softened water. No dosing unit included! These machines are ex-lease units. Various configurations available, potentially with internal salt softener, GIO module, or completely without softener. Let us know how you would like your package to be configured. Price is a basic price depending on configuration—request your individual offer! Comes with 6 months spare parts warranty. Preventive maintenance with replacement of some wear parts was always carried out. Fgodpsp Ebn Dsfx Alyef Inspection and test run on site possible and encouraged. Technical data: Capacity: up to 60/40/17 racks (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program cycle times: 60/90/210 sec Rack size (mm): 500 x 500 Clear entry height: 440 mm Tank capacity: 22 l Water consumption per rack: 2.6 l Tank heating: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: Stainless steel Connection rating: 400 V / 11.2 kW (cold water), 9.7 kW (hot water) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: 3-phase, 3 NPE, 400 V, 50 Hz. The wiring complies with VDE regulations. Water installation: Dishwashers can be connected directly to the mains water supply without the need for additional safety fittings. Minimum flow pressure: 0.6 bar, maximum pressure: 5 bar. Installation standard EN 1717 must be observed. Drain: ¾". Customer-provided wall drain max. 700 mm high. Connection hoses approx. 1.8 m from dishwasher. Collection of machines preferred. Shipping by freight carrier possible if costs are covered.

Kondisi: bekas, Tahun pembuatan: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm steel Bending capacity: 8.0 mm steel Top roll diameter: approx. 205 mm Side roll diameter: approx. 195 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll plate bending machine - 3-roll concept offers a wide range of bending and rolling options Fedpfx Aljxacdveyjgf - Swivelling control unit at the front * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters up to 1.1 times the top roll diameter achievable - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy steel welded construction - Electro-hydraulic drop-end for easy removal of pipes - Manometer / pressure indicator for the rolls - Safety device (safety cable with switch unit) - Operating instructions (PDF)