Pengeboran dan penggilingan mesin

FEHLMANN PICOMAX 100 CNC

Kondisi: bekas, CNC universal coordinate drilling and milling machine FEHLMANN model PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 Serial no. 16186651 Year of manufacture: 1986 Spindle taper FEHLMANN SF32 Drilling capacity Ø 30 mm in steel Tapping up to M20 in steel Travel distances X: 850 mm, Y: 435 mm Quill stroke Z: 210 mm Vertical head movement 580 mm Feed rate X and Y 1 to 8000 mm/min Feed rate Z 1 to 4000 mm/min Rapid traverse X and Y 8 m/min Rapid traverse Z 4 m/min Clamping surface of table 1570 x 500 mm Distance spindle nose – table 130 - 720 mm Spindle overhang – column 450 mm Spindle speed 50 - 7100 rpm, infinitely variable Spindle drive 10 kW Total connected load 20 kW Power supply 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3-axis control: X, Y and Z (quill adjustment) - hydro-mechanical tool clamping FEHLMANN SF32 - tapping device - cable remote control for machine operation and axis movement - motorized vertical movement of milling head with cutoff via adjustable limit switches - 3D probe RENISHAW, type MP 11F with Fehlmann SF32 holder - 20 tool holders FEHLMANN SF32 - swing tool rack with 21 tool positions - coolant system integrated in machine base - control cabinet fixed to the machine - documentation: operating instructions, control manual, and electrical diagrams Gjdpfx Aohik Ezsaxjbw Space requirement (L x W x H): 2350 x 2000 x 2300 mm Weight: 3.2 tons Very good condition

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.500 mm, diameter pembubutan: 550 mm, daya motor spindle: 22.000 W, kecepatan spindel (min.): 3.800 rpm, lubang spindel: 80 mm, daya: 22 kW (29,91 hp), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Okuma Macturn 350 2SW-1500 Big Bore Main Spindle, Machine Type: CNC Turning-Milling Center Make / Manufacturer: Okuma Model / Type: MacTurn 350 2SW1500 BigBore Year of Manufacture: 2008 / 2009 Control System: OSP P 200 L IGF One Touch Advanced + CAS Spindle Operating Hours: 6437 h Technical Data Maximum turning diameter: 550 mm Maximum turning length: 1,500 mm Travel paths upper turret (milling spindle): X-Axis: 505 mm / 190 mm / 1670 mm Y-Axis: 190 mm (+95 / -95) Z-Axis: 1670 mm W-Axis: 1680 mm Travel paths lower turret: X/Z 210 mm / 1670 mm Main spindle “Big Bore” version Main spindle motor: 22 kW, 412 Nm Maximum speed main spindle: 3800 rpm Main spindle nose: JIS A2-8 Spindle bore: 80 mm Maximum bar diameter: 71 mm C-Axis: 0.001° Sub spindle “Super Big Bore” version Sub spindle motor: 22 kW, 412 Nm Maximum speed sub spindle: 3300 rpm Sub spindle nose: JIS A2-8 Spindle bore: 80 mm Maximum bar diameter: 71 mm Milling spindle Milling spindle motor: 11 kW Maximum speed milling spindle: 12,000 rpm Tool holder: HSK 63 B-Axis: 0.001° Tool magazine: 44 stations Lower turret Tool positions: 12 Tool holder: VDI-40 Driven tool stations: 12 positions Max. output driven tools: 7.5 kW Max. speed driven tools: 4500 rpm Machine weight: approx. 15,000 kg Space requirements: 6000 x 3500 x 3000 cm Further equipment features - High-pressure coolant 40 bar - Chip conveyor Interlit ISF 614 - Heavy-duty crane filter Interlit SBP 4 - Touch setter - Helical cutting – 4 extra M-code set - 2x hydraulic power chucks SMW BH-D 315-95, dia. 250 mm - DNC-T1 interface - RS232C interface - Chuck air blast function main/sub spindle - TAS-S + TAC-C Condition report after commissioning in Bergisch Gladbach Measuring results geometry Backlash XA-Axis: 0.015 mm Backlash XB-Axis: 0.015 mm Backlash ZA-Axis: 0.020 mm Backlash ZB-Axis: 0.020 mm Backlash Y-Axis: 0.010 mm XA-Axis measured with test mandrel at 300 mm: 0.02 YA at 300 mm: 0.007 in T1, T2, T3 B-Axis: Alignment and function good M-drive lower turret: tested and good Milling spindle: tested up to 6000 rpm, no anomalies Main/sub spindle: tested, no anomalies High-pressure pumps function: good, no anomalies Accessories - 2 x hydraulic crane chucks SMW - Pallet with 16 powered tool holders, 10 HSK 63 holders, 3 VDI 40 holders - Lifting hook front side - all original axis safety locks Gedpfxevta Rde Aaxsbw Neff – The Okuma Specialist and NeffBuy In addition, we are happy to provide the all-in-one worry-free package, including inspection in our showroom with demonstration and acceptance, loading, transport, installation, commissioning of the machine, as well as training and subsequent service. We offer Okuma CNC service across Europe, both electronic and mechanical, and on top, we have a 1,200 m² inventory of all Okuma spare parts. Please visit our homepage for more information.

Kondisi: baik (bekas), Tahun pembuatan: 2010, Heidenhain 530 Steuerung, Verfahrwege X/Y/Z: 1050 x 510 x 510 mm, Tischgröße: 1300 x 550 mm, Abstand Spindelnase-Tisch: 150 – 660 mm, Maximales Werkstückgewicht: 1200 kg, Spindeldrehzahl: 0 – 12.000 U/min, Spindelaufnahme: DIN 40, Spindelmotor: 11 kW, 30-fach Werkzeugwechsler (ATC), Späneförderer, Kühlmittelanlage, Niedervoltbeleuchtung, Gbsdpsucdvqefx Aaxjw

Tahun pembuatan: 2007, Kondisi: baik (bekas), ■ V600-Bohrmaschine (fahrbarer Bohrschrank, ausgestattet mit 1 Horizontal-Bohraggregat und automatischem Werkzeugwechsler) ■ Bohrtisch mit Stromschiene, Länge 15 Meter, effektive Bearbeitungslänge 12 Meter ■ Hard- und Software (inklusive VACON 110 Maschinensteuerung) ■ Sicherheitseinrichtungen (Sicherheitsstoßfänger) Gedpfxsq Hgg Us Aaxebw ■ Baujahr 2007

Kondisi: bekas, Tahun pembuatan: 2014, Milling machines Travel X: 1067 mm Travel Y: 610 mm Travel Z: 610 mm HSC (High-Speed Cutting) machine Gbodpfjw H Awlsx Aaxow Number of axes: 3 Milling machine / machining center Spindle speed: 12,000 rpm Table size X: 1270 mm Table size Y: 610 mm Drive power: 12 kW Torque: 237 Nm

Kondisi: baik (bekas), Tahun pembuatan: 2003, Control unit: Heidenhain TNC 426/430 Table size: 800 x 500 mm Table load: 500 kg X travel: 630 mm Y travel: 500 mm Z travel: 500 mm Gjdpfx Aeuiif Doaxebw Spindle speed: 8,000 rpm Taper: SK40 ATC magazine: 24 positions Rapid traverse: 30 m/min Weight: 4,500 kg Dimensions (LxWxH): 3,100 x 2,100 x 2,400 mm Equipment/Features: - Coolant system - 4th axis with rotary table - Electronic handwheel - Documentation The machine has seen little use.

Tahun pembuatan: 2024, Kondisi: baru, de Gsdpfx Aoh Imyaoaxsbw

Kondisi: bekas, Tahun pembuatan: 2019, Travel path - X axis: 1,525 mm Travel path - Y axis: 770 mm Travel path - Z axis: 625 mm Control: HEIDENHAIN TNC 620 Table dimensions (L x W): 1,600 x 750 mm Number of tool changer positions: 24 Tool holder: SK50 Vertical machining center | DOOSAN MYNX 7500/50 II equipped with 24-position tool changer, internal coolant system (IKZ), and chip conveyor. Gjdpfx Aaswq S Axoxsbw The machine has only 3,165 spindle hours. The machine is in well-maintained condition. A video of the machine at the factory site is available on request. Detailed technical data of the machine will follow shortly. #Tags: MYNX7500/50II | MYNX 7500 | MYNX7500 | MYNX-7500 | MYNX750050II

Kondisi: baru, new completely stainless steel diameter 1,250 mm adjustable height 820 – 910 mm with 10 mm high railing 1 speed (3 revolutions per minute) 0.12 kW Gbedpfx Aajufxa Aexjw

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Gedpfsfz I Ehsx Aaxobw Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.