Pers pengosongan halus

FEINTOOL GKP F 160

Kondisi: baik (bekas), diameter penggilingan: 1.600 mm, panjang penggilingan: 6.000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 steady rests hydrostatic Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Center height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Klodpfx Ajvvvw Esa Nel Approximate dimensions: Length: 15,100 mm Width: 5,500 mm Height: 3,550 mm Weight: 120,000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, no representation or contractual terms will be constituted. We recommend verifying all critical details independently.

Kondisi: bekas, Tahun pembuatan: 1996, nomor mesin/kendaraan: 7/4986, Total pressing force: 250 - 400 t Hydraulic ring tooth force (lower table): 20 - 200 t Hydraulic counterforce (upper table): 10 - 100 t Ram stroke: 30 - 200 mm Ring tooth stroke: 40 mm Counterholder stroke: 40 mm Ksdpouqdxiofx Aa Nell Max. tool dimensions: 765 x 760 x 610 mm Number of strokes: 40 min-1 Rapid traverse down: 120 mm/s Rapid traverse up: 135 mm/s Working speed: 5 - 50 mm/s Total tool weight: 2400 kg Standard equipment Automation Run-off trough with straightening machine

Kondisi: hampir baru (bekas), diameter pembubutan: 1.500 mm, MAXIMUM MACHINING DIAMETER: 1600 mm. MAXIMUM MACHINING LENGTH: 3000 mm. SPINDLE BORE DIAMETER: 83 mm. OUR MACHINE IS FULLY OPERATIONAL AND PROBLEM-FREE. ALL SPEEDS AND FEEDS ARE IN EXCELLENT WORKING CONDITION. Kjdpfx Aor Ui R Nea Nell

Tahun pembuatan: 1990, Kondisi: hampir baru (bekas), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Modell: Schuler EB 2-500-2,75-0,85 H-Rahmen-Hydraulikpresse Kedpfjhcnxrsx Aa Noll Presskraft: 500 Tonnen Tischabmessungen (x-y/mm): 3000 × 1800 Stößelabmessungen (x-y/mm): 3000 × 1800 Hub (x/mm): 850 Hübe pro Minute: von 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen verfügbar

Kondisi: baik (bekas), Tahun pembuatan: 1963, Vertical turning lathe Kjdpfxsvi Hrye Aa Nell Manufacturer: JUNGENTHAL Type: DK 1400 Year: 1963 with 1-axis digital readout. Max. turning diameter: 1400 mm Faceplate: 1250 mm Automatic turret head Spindle speeds: 3.5 - 180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For further specifications, see data sheet. Machine documentation available. Machine dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t Good overall condition.

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m As a world leader in the field of Kellenberger overhauling/retrofit, we are not only able to deliver machines in new-machine quality and with warranty, but can also provide service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA round grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales on x and z axes - New absolute rotary encoder (for B axis) Standard equipment: - Tailstock with Morse taper MK5, optionally with MK5/short taper adapter - Steady rest with MK4 taper, optionally with fine adjustment - Grinding spindle stock T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding device belt-driven via grinding spindle motor Kjdpfx Aouwv H Tea Nsll - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle stock) ELASO integrated into control interface - Semi-automatic balancing from ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - High-precision, highly tilt-resistant workpiece spindle stock - Measurement control - Extraction system - Paper band filter Control: Grinding basic cycles: - Zero the workpiece with Z-position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamonds - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Kljdpferz Nflex Aa Nsl Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: Klsdjcc D Ddspfx Aa Nol The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Module size: 5 mm, max. workpiece diameter: 180 mm, axial travel: 400 mm, shank travel: 200 mm, cutter diameter: 150 mm, tool speed: 2250 rpm, table speed: 250 rpm, max. clamping length for boring cutter/shank cutter: 236 mm/360 mm, control: Liebherr PC-NC. Documentation available. On-site inspection possible. Ksdpfxovpvius Aa Nsll

Kondisi: baik (bekas), Tahun pembuatan: 2000, tinggi total: 47.000 mm, lebar total: 27.000 mm, panjang total: 25.000 mm, lebar meja: 1.000 mm, panjang meja: 1.800 mm, berat keseluruhan: 43.000 kg, lebar pelat tuas: 600 mm, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Sick photoelectric sensor Separate Rittal control cabinet Side walkways Floor-level installation Klsdpfotiwgisx Aa Nel