Mesin amplas belt lebar Felder FW 952

Felder FW 952

Kondisi: sangat baik (bekas), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (60 Sh roller, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Gedpfx Asxqggcsdtjbg Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extensions with 2 rollers, front and rear Sanding shoe inserts lined with new graphite cloth Including as-new sanding belts Incl. all documentation Note on used machinery: • Subject to errors in technical specifications and prior sale. • Quoted prices are ex-location – loaded free of charge! • The machines have been cleaned and functionality tested. • All machines are sold as inspected, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines on-site. • Special agreements are only valid if made in writing. (We only respond to inquiries stating your address and telephone number!)

Kondisi: baru, Jumlah spindel: 6 unit Lebar kerja: 250 mm Tinggi kerja: 150 mm Panjang meja jointer: 2500 mm Motor pengumpan: 4 kW Kecepatan pengumpan: 6-24 m/menit Berat: 4770 kg Dimensi (Panjang/Lebar/Tinggi): 4722x1860x1776 mm Mesin moulding empat sisi Kuper SWT XL-6 versi jendela dengan pengaturan aksial dan radial spindel secara elektronik. Bodi mesin berat, tidak mudah melintir dan minim getaran. Gsdpovnv Ubsfx Adtobg Jumlah spindel: 6 Lebar kerja: 250 mm Tinggi kerja: 150 mm Panjang meja jointer: 2500 mm Kecepatan spindel: dikontrol frekuensi, 4.000 - 8.000 rpm Kecepatan pengumpan: 6-24 m/menit Deskripsi lengkap tersedia pada file PDF terlampir! (Data teknis sesuai informasi produsen – tanpa jaminan!)

Kondisi: baru, Technical data: Gsdpfx Adeg A D Anjtsbg Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), For sale: Costa A1 ACT 1150 bottom sander, year 2001. Gjdpjgq U R Nefx Adtobg Configuration: soft drum with electronic segmented pad. Working width: 1150 mm Abrasive belt dimensions: 1180 x 2620 mm Infeed rollers for processing short workpieces. Vacuum fan included. Air blowers on both sanding units. Total weight: 2,500 kg 2 motors: 7.5 kW and 15 kW Total power: 27 kW Condition: very good, regularly serviced machine. Available immediately.

Kondisi: bekas, SCM Sandya 600 RCS 110 Otomatis Kalibrasi dan Penghalusan Amplas Pita Lebar Pusat pengamplasan berkinerja tinggi untuk kalibrasi, pengamplasan kayu solid, dan penghalusan veneer PERALATAN TOP 1. Unit amplas kalibrasi dengan rol kontak baja beralur miring RA 2. Unit amplas kombinasi dengan rol kontak diameter 140 mm, kekerasan 85 Shore, sepatu amplas segmentasi elastis dengan sektor dikendalikan secara elektronik Lebar kerja 1100 mm Daya motor utama 15 kW Desain "B" untuk RCS MESAR sepatu amplas segmentasi elastis Unit pemrograman elektronik "LOGIC SC kendali layar" Pengaturan ketinggian kerja elektronik dengan deteksi otomatis benda kerja Meja rol masuk dan keluar untuk benda kerja panjang Gbodpfextan Sox Adtjg Mesin dari bengkel kecil / TARIK LEASING Pengiriman pertama 2017 Stok di Lieboch / OPSI LEASING

Kondisi: baru, The ALTENDORF F 25 offers all essential features of a panel saw in a compact footprint. Whether for your first own workshop, daily use, industrial production, or as a powerful secondary machine—the F 25 is the space-saving all-rounder designed to boost your productivity. Materials such as wood-based panels, solid wood, wood-like substances, and extrusions can be processed with high precision, easy handling, and outstanding cut quality. The saw unit swivels on one side, enabling precise angle cuts. The smooth-running double roller carriage, designed according to the Altendorf system, comes as standard, as do the digital height and tilt displays. This is a machine suitable for both beginners and professionals alike. Gbsdpfx Adeu R S Hcetog Features: - Double roller carriage - Swivelling saw unit - Manual height and tilt adjustment - Parallel fence with manual fine adjustment - Crosscut/miter fence - Ready for optional scoring unit installation ----- Technical Specifications ----- - Swivel range: 0 - 46° - Carriage length: 3,200 mm - Cutting width: 1,000 mm - Cutting height: 100 mm - Max. saw blade Ø: 315 mm - Max. saw blade projection: 104 mm - (Non-CE version) Max. saw blade Ø: 350 mm, max. projection: 121.5 mm - Crosscut fence extendable up to: 3,450 mm - Speeds: 4,200 rpm - Motor power: 4.4 kW (5.5 HP) - Table height: 880 mm - Large extraction hood available as an option - - New showroom machine -

Kondisi: baru, Tahun pembuatan: 2025, For machining smaller parts, particularly solid wood - Simple and safe operation - Combination sanding unit with sanding shoe - For calibrating solid wood - Control panel on the front side - Standard equipment includes a ribbed steel roller Ø 120 mm and a hard sanding shoe with graphite coating on an interchangeable insert - Motorized height adjustment of the work table - Electronically controlled sanding belt oscillation - Manual star-delta start of the motor - Mechanical measurement of table position - Ammeter to display current consumption of the sanding unit - Two feed belt speeds - Electromagnetic brake Combination unit for calibrating and sanding - Ribbed steel roller Ø 120 mm with fine height adjustment - Hard sanding shoe with graphite pad - Universal version for calibration and sanding of solid wood Model: BBS 630 C Article No.: 5343065 Technical Data - Working width: 630 mm - Diameter of working roller: 120 mm - Sanding belt width: 650 mm - Sanding belt length: 1600 mm - Sanding belt speed: 18 m/s - Min./max. workpiece height: 3/160 mm Gsdpfx Aecnw U Rodtjbg - Feed speed: 4.5 / 9 m/min - Motor power: 5 kW / 400 V - Feed drive motor: 0.43 kW - Height adjustment motor: 0.18 kW - Compressed air consumption: 20 l/min - Operating pressure: 5.5 bar - Operating pressure for belt blower: 8 bar - Extraction duct diameter: 150 mm - Extraction capacity: 3,000 m³/h - Dimensions (mm): 600 x 1010 x 1500 - Weight: 770 kg Location: Coming into stock at 54634 Bitburg

Kondisi: bekas, Tahun pembuatan: 2021, Number of spindles: 5 pcs. Working width: 250 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Gbodpfswgwmnsx Adtog Control: K2 Basic 7" touchscreen KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm; spindle 4,500 up to 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed carriage motorized positioning - Additional motorized adjustments: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 - 230 mm Working height (with tool diameter 125 mm): 10 - 160 mm (tool diameter up to 163 mm) 10 - 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Workpiece machining depends on the following operating parameters: Material, wood moisture, tooling, cutting depth diameter, and feed speed. Parameter adjustments may be necessary as required. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rebate device: diameter difference 20 – 25 mm to planing head Important: unit cannot be operated without a jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick-release nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Tableplate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Tableplate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inv...

Kondisi: baik (bekas), Tahun pembuatan: 2003, berat keseluruhan: 1.900 kg, Paoloni Kalibra 30 - Maximum sanding width: 110 cm - 15 kW main motor - First unit equipped with a steel roller - Second unit with a pad shoe and a rubber-coated roller - Shoe control from the operator panel/table - Weight: 1,900 kg Gedpforumipsx Adtjbg The machine operates very well.

Kondisi: bekas, Tahun pembuatan: 2023, Used machine Year of manufacture: 2023 Condition: Absolutely as new, the machine is unused Equipment and technical specifications: - 2-belt machine; 1st belt roller, 2nd belt pad - Usable working width: 1100 mm - Abrasive belt dimensions: 1120 x 2150 mm - Maximum workpiece thickness: 160 mm - Steel calibration roller: 150 mm - Sanding pad width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Variable feed conveyor gearbox with steplessly adjustable speed: 4/20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation 'Eco Gear Patent System' Gsdjw E Ty Uepfx Adtjbg - 1 pc. drum brake for belt stop - Swiveling roller for belt tension - 3 pcs. pressure rollers; rubber coated - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 pcs. roller tables with 2 rollers each at infeed and outfeed - 1 extraction nozzle 160 mm Ø - Automatic table positioning - New patented belt oscillation system - no valves - no light barriers - not sensitive to dust - energy-efficient, environmentally friendly system - Since 2008, the machine model with this system has operated continuously without lateral belt drift! - Incl. Unitek belt motor, 14.7 kW instead of 11 kW (Promotor) - Incl. Unitek pneumatic sanding pad with feed-synchronized control Availability: short-term Storage location: Saxony-Anhalt