Gergaji meja geser

Felder Kappa 400

Kondisi: sangat baik (bekas), Gergaji panel Felder kappa 400 format 4 Gerobak 320 cm, Kemiringan serta naik turun mata gergaji diatur secara elektrik Pagar kanan diatur manual hingga 1250 mm, Skor 1,1 KW, Motor utama 7,3 KW, 3 kecepatan pemotongan Pedpfx Abex Arv Hsuepl Maks. diameter mata gergaji 400 mm Skor: 120 mm, lubang 20 mm Mesin bekas, kondisi sangat baik.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Format Circular Saw Felder K 975 Pjdpfjxl Dw Usx Abujpl Panjang potong: 3200 mm. Lebar potong: 1350 mm Tinggi potong maksimum: 130 mm (diameter mata gergaji: 400 mm) Kemiringan mata gergaji dan scoring: 0-45° digital Penyesuaian tinggi mata gergaji dan scoring secara digital Pagar paralel dapat diatur secara manual Pengaktifan mata gergaji utama dan scoring dari panel kontrol dan/atau meja mesin Motor utama format circular saw: 5,5 kW (7,5 HP) (kecepatan putaran dapat diatur: 3500/4500/5500 rpm) Motor scoring untuk format circular saw

Kondisi: bekas, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx: 2500 kg Weinig Profimat 23 four-sided planer, window version with glass bead cutting, or can be used as a grooving spindle ATS control and program control --- Machine is currently being overhauled and function-tested Technical data summary (For any additionally included accessories, please enquire) --- General --- Podeu Su Huspfx Abujpl > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs > Surfacing table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx: 2500 kg Spindle configuration --- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically controlled up/down Spindle specifications --- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features --- > Glass bead separation or can be used as a grooving device > ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package - Shared control of the right spindle and glass bead removal via manual selector switch on the control panel > Spindles with mechanical digital readout Option: Used planing heads (Technical data according to manufacturer - no liability assumed!)

Kondisi: sangat baik (bekas), Mesin frais spindle bawah Panhans 240A Pjdoxg Iz Hepfx Abuopl Diameter spindle: 30 mm Panjang spindle: 130 mm Kecepatan spindle variabel: 3000/4500/6000/9000 rpm Penyetelan ketinggian spindle elektronik Penyetelan penggaris elektronik Penyetelan sudut elektronik Unit asupan 4 rol SCM

Kondisi: bekas, Tahun pembuatan: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (reference side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length in pendulum operation mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air velocity m/s 25 Extraction port diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with workpiece support table, suitable for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with disc cutter - General milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded reinforcements across the entire machine bed, ensuring extreme stability. The specially designed table form, with a broad base, is key to guaranteeing lasting precision and stability. The machine layout allows the operator an optimal workflow while keeping space requirements to a minimum. The mobile gantry carrier is constructed from a solid monoblock. It is positioned in the X-direction on prismatically ground guides with recirculating ball carriages. The machining unit on this mobile aggregate carrier is also guided on prismatically ground guides and recirculating ball carriages AXIS TRAVEL All axes move on large-section linear prism guides and recirculating ball shoes with a large support surface, ensuring optimal sliding even at maximum speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved by helical rack and pinion. Large-section recirculating ball screws ensure precise positioning of the working unit along the mobile gantry (Y- and Z-axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, dimensioned to allow speeds of up to 90 m/min while maintaining the best finishing quality CONTROL The control unit consists of a numerical controller for milling and drilling machines with the "Xilog Maestro" graphical user interface running on: - Office operating system Windows 7 - 17” color LCD screen - QWERTY keyboard - Swiveling control panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features Programming - Parametric graphical programming - Import of DXF files (2D; geometries "SPLINE", "POLYLINE 3D", line or circle interpolation in three axes, linear in space, spiral interpolation in the selected plane) - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Capability for panel zero-point shifting to execute drilling on inclined or curved panel edges Psdpfexnldbsx Abuopl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1974, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 74-4-10, ALTENDORF F90 panel saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer: Altendorf, Germany Saw length: 2600 mm Cutting width: 1,300 mm Max. cutting height: 130 mm Max. saw blade diameter: 400 mm Main motor: 5.5 kW With scoring unit Ppsdpfeipvrbsx Abujl 4 speed settings Saw blade height adjustment: manual Approximate weight: 780 kg Technical data subject to change

Kondisi: bekas, Tahun pembuatan: 1981, Jarak antara senter: 1300 mm Panjang penyalinan: 1250 mm Tinggi senter mesin: 250 mm Tinggi senter di atas support: 160 mm Kecepatan feeding carriage: 3 m/menit Berat: 630 kg Kecepatan putar: 500-1000-1500-3000-2100-4200 rpm Hidraulik Lokasi penyimpanan: Nattheim Ppjdpfjvvkt Iex Abusl

Kondisi: baru, Format circular saw ALTENDORF WA 6 - Demonstration machine - manual height adjustment, double roller carriage, scoring unit, tilt function, outrigger table, angle/miter fence, automatic brake, can be lowered below table height ----- Technical data ----- tilt range: 0 - 45°, cutting length: 2,500 mm, cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, tilt range of miter fence: up to 49°, speeds: 4,200 rpm, motor power main motor: 5.5 HP / 4.0 kW, motor power scoring unit: 0.5 HP / 0.37 kW, table height: 910 mm, extraction ports Ø: each 1 x 100 / 50 mm, Psdpfx Abou R Sx Eouopl weight: 450 kg - new demonstration machine -

Kondisi: baik (bekas), Tahun pembuatan: 1990, lebar pemotongan (maks.): 1.000 mm, ketinggian potong (maks.): 140 mm, panjang meja: 1.400 mm, daya: 5,5 kW (7,48 hp), Types: F 45, Machine no.: 90-8-86 Pjdpfx Astxh Nijbuopl

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Processing center Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-position tool changer. The NC410 control featured a floppy disk drive and a color monitor, as well as basic, graphically assisted programming options. Additionally, the Rover 20 already enabled pendulum (dual-zone) machining. Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Control cabinet: 950 x 700 x 1,300 mm Ppedpolc Dwnjfx Abujl Ex site