Pneumatik Zylinder FESTO DNU-40-125-PPV-A 14137

FESTO DNU-40-125-PPV-A 14137

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D12L/8263, Nomor penawaran: D12L/8263 Jenis mesin: Mesin Press Paku Kawat Merek: WAFIOS Tipe: N90 Tahun pembuatan: 1997 Rentang diameter: 2,0-4,0 mm Lodpjwi Tg Asfx Apnoag Panjang paku: 50-100 mm Kapasitas - buah/menit: 800 Lokasi: Di gudang kami

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Passage width: 170 mm Speed: approx. 25 m/min Direction of operation: optional Ljdpfxsp E Eglj Apnjag Working roller diameter: 120 mm Bale length: 150 mm Support rollers: support block/chain

Kondisi: baik (bekas), Tilting spindle moulder, table router, table milling machine - Spindle adjustment: height and angle - Tilting range: -3° to 45° - Motor power: 4.5/5.5 kW Lsdpfxsh Nvyze Apneag - Speeds: 3000/4500/6000/9000/12000 rpm - Power feed unit Holz-Her, 3 rollers - Usable shaft length: 100 mm - Spindle diameter: 30 mm - Max. cutter diameter: 220 mm - Dimensions (L/W/H): 1540/1100/1520 mm - Weight: 962 kg

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers integrated into the table - Chrome-plated table - Infinitely variable feed speed adjustment Lasdpfshlp D Njx Apnsg - 2 overhead return rollers positioned in front of the lower head, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, with little use. Equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. Ljdpeng Amkofx Apnjag POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Kondisi: baik (bekas), Tahun pembuatan: 2004, Universal milling machine with HEIDENHAIN TNC 124 traverse control - Mechanical handwheels - Swiveling tilting table ± 45° - Hydraulic tool clamping - Half enclosure - Coolant tank - Manual Technical details: - X travel: 600 mm - Y travel: 400 mm - Z travel: 400 mm Laedpfx Apeigm Tcenjg - Spindle speed range: 63 – 3,150 rpm - Infinitely variable feed: 12–3,000 / 6–1,500 (Z) mm/min - Quill stroke: 100 mm - Head swiveling: ± 90° - Spindle taper: ISO SK 40 - Clamping surface: 630 x 400 mm - Total power requirement: 8 kW - Machine weight approx. 2.2 t - Space requirements approx. 2 x 1.9 x 1.95 m

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), DE-SMS MEER CNC-DOPPELSEITIGE ANFASMASCHINE Hersteller: SMS MEER Typ: RFA 14 Baujahr: 2000 Laedpfoghrgujx Apnsg Arbeitsbereich: Rohr-Ø 21,3 – 114,3 mm Wandstärke: 2,3 - 11 mm Länge: 6-12 m Bestehend aus zwei RFA14-Angleautomaten mit Fördereinrichtungen zwischen den Maschinen. Die Aufgabe der Maschinen ist das Anfasen der Innen- und Außenseite beider Rohrenden. Der Durchmesserbereich der angefasten Rohre beträgt 21,3-114,3 mm bei einer Wandstärke von 2,3-11 mm und einer Länge von 6-12 m. Die Aufgabe des Transports im Bereich der Anfasmaschinen besteht darin, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu bewegen.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 1988, nomor mesin/kendaraan: 1116/87, MANUFACTURER: ELTERMA / IPSEN Lsdsm E Tvhspfx Apnsag MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR: 1988 CONDITION: New, unused; requires a new control cabinet Charge dimensions: 610x900x500 mm Maximum load: 500 kg Working temperature: 150-750ºC Approximate chamber heating time up to 550ºC: 30 minutes

Kondisi: bekas, Adhesive application Glue application Adhesive dispensing - Glue application for package heights up to 300 mm using 1 applicator roller - Drive via 0.37 kW worm gear motor - 1 pc left - 1 pc right - suitable for DIMTER HK 200 and HK 400 Dimter spare parts Lsdpjcht Nyefx Apnjag Dimter accessories

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 4, This 4-axis HAAS VF-4SS was manufactured in 2019. It offers an X-axis travel of 1270 mm, a Y-axis travel of 508 mm, and a Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and features a chip conveyor, a coolant filtration system, and a fourth axis drive. If you are looking for high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center that we are offering for sale. Please contact us for further details. • Spindle nose to table (max): 742 mm • Spindle nose to table (min): 107 mm • Through-spindle coolant: Yes • Programmable coolant nozzle: Yes • Rigid tapping: Yes • Visual part programming system: Yes • Ethernet interface: Yes • Remote monitoring: HaasConnect + HaasDrop • Electronic handwheel with touchscreen: Included • Coolant filtration system: Included • Fourth axis drive and wiring: Included • Spindle air blast: Included • Coordinate rotation and scaling: Included • Tool presetting arm: Included • Work light: Included • Standard memory: 1 GB • Machine orientation: Vertical • Installation and basic training: Included • Warranty: 12 months Additional Equipment Laedpfsza A Ensx Apnjg • Chip conveyor: Auger type • HRT210 rotary table (CNC rotary table) • Servo drive: Sigma 5 • Manual tailstock: 6" • Compatibility note: VF-4SS