Aksesoris lainnya untuk peralatan mesin

FETTE T42

Kondisi: hampir baru (bekas), Mesin gerinda tanpa pusat ESTARTA 301 CNC Lhsdpjxfqzmefx Aiaol

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace Lhsdpfxjiryyaj Aiajl - As new: barely used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in vacuum Temperature control accuracy: ± 2 K Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of stabilization period Control voltage: 230 VAC / 24 VDC Usable chamber dimensions: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold furnace): < 5 * 10-5 mbar with clean, dry furnace Footprint: 900 x 1900 x 3000 mm Total weight: approx. 1500 kg Sound pressure level: < 70 dB We do not guarantee the accuracy, completeness, or currentness of the provided information.

Kondisi: baru, Saw blade diameter: 370 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) Lhjdpfjd Iin Hex Aiael - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Kondisi: bekas, Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.800 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 2.000 mm, beban meja: 5.000 kg, diameter spindel: 110 mm, tinggi total: 3.800 mm, panjang total: 5.000 mm, lebar total: 3.000 mm, panjang meja: 1.520 mm, lebar meja: 1.225 mm, panjang pemakanan sumbu X: 1.800 mm, panjang umpan sumbu Y: 1.500 mm, panjang umpan sumbu Z: 2.000 mm, Pemegang alat SK50, kontrol Heidenhain, mesin siap diambil dan siap pakai segera. Ledpfxexga Tns Aiaehl

Tahun pembuatan: 2016, Kondisi: seperti baru (mesin pameran), Axial fan condenser, air cooler Manufacturer: Güntner Model: GCVC RD 035.1/12-42-0007305P Year of manufacture: 2016 Condition: new Number of fans: 2 Lhodpsnbff Aefx Aiaol Capacity: 4.6 l Compressed air: 32.5 bar

Kondisi: sangat baik (bekas), Dijual mesin ini, sudah terpasang dan dapat diuji coba. Diameter benda kerja maks: 1600 mm Modul: 16 Daya motor utama: 12 kW Dimensi (P x L x T): 4300 x 2000 x 3170 mm Lhodpfx Aisv Nqppeael Berat mesin: 18.500 kg Video mesin dapat dikirim melalui aplikasi WhatsApp.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Lhjdpfx Aeuz If Noiajl Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Lsdpfx Asmf Aw Aeiashl Number of spindles: 8

Kondisi: bekas, Tahun pembuatan: 1990, drehparam-001 Ledpfsygx D Hsx Aiashl

Kondisi: bekas, Tahun pembuatan: 2005, Turning diameter 275 mm Turning length 900 mm Control system: TRAUB TX8i Spindle bore 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Lsdjw E Nnbopfx Aiaehl Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds – stepless: 1 – 5,000 rpm Spindle diameter (front bearing): 110 mm C-axis: 1 – 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret – number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 – 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar feeder DNH61 / 3000 Bar lengths: 1,000 – 3,200 mm Bar diameter: 18 – 63 mm Max. hexagon across flats: 45 mm Total power requirement: 95.00 kW Machine weight approx. 16.00 t Space required approx. 10.00 x 3.50 x H3.00 m Equipped with control system TRAUB TX 8i, main and counter spindle with C-axis, 3 pcs. turret tool holders, 1 pc. vertical tool holder with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various tool holders, non-driven 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.