Pengangkat vakum

FINKEN VH 6-500

Kondisi: baru, Load capacity 500 kg Number of suction pads: 6 Diameter of suction pads: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing steel construction, painted in RAL 2000, with low dead weight. Consisting of: - 1x Galvanised longitudinal beam, length 2,400 mm - 3x Galvanised crossbeams, length 1,000 mm - 6x Spring-mounted, articulated, and adjustable suction pad holders - 6x Suction pads Ø 215 mm; in case of wear, seals can be inexpensively replaced without tools, separate from their metal carrier - 6x Ball valves to individually shut off suction pads, allowing smaller formats to be lifted without having to move the pads or beams - 1x Spiral connection cable, small coil: * Extension length 3,500 mm, designed as extension cable with CEE plug and socket * Routed alongside the load chain to the lifting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with suction capacity of 8 m³/h and final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and no neutral conductor is present) Rodpfjq Sc Auex Ahwep - Operating handle extendable up to 1,000 mm from the centre of the beam - Stable sheet metal pocket for your crane controls included, at no extra charge - Operation "Suction / Release" via hand slide valve: Wear-free and very robust hand slide valve ensures secure suction and release following actuation of the release button (double release according to EN 13155) - Control and safety device for vacuum lifter: * Sturdy control box * Contactor circuit for the vacuum pump * Safety warning device with acoustic alarm * Vacuum gauge with danger zone indicator * Large vacuum accumulator tank with safety non-return valve * Double release operation when unloading - Fine dust filter to protect the vacuum pump - Comprehensive and easily understood documentation Guarantee against material and manufacturing defects for one year under single-shift operation (excluding wear parts). Initial safety inspection UVV 18, VBG 9a, with CE declaration of conformity – according to EN 13155 - Packaging for truck transport.

Kondisi: bekas, Tahun pembuatan: 1999, Payload: 19,990 kg Redpfxstr H Ens Ahwjp Gross vehicle weight: 8,010 kg Tyre condition front: 70% Tyre condition rear: 70% Front tyres: 245/70 R 17.5 Rear tyres: 245/70 R 17.5 Please contact PFEIFER GROUP for further information.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: listrik, berat keseluruhan: 2.500 kg, berat muatan maksimum: 2.500 kg, tipe tiang: telescopik, Self-propelled battery-powered crane from the renowned Italian manufacturer JMG, model MC25S with radio control, offering a lifting capacity of 2,500 kg. Brand new unit, available for viewing. Official distributor, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. WHEEL DRIVE: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAXIMUM LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM LIFT ANGLE UP: 60° BOOM LIFT ANGLE DOWN: -15° FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant frame constructed from high-strength structural steel. BOOM: Made from high-quality steel plate, formed and welded. Consists of the base section, hydraulic telescopic system, and a mechanical extension. Boom tilt and extension are hydraulically controlled by telescopic cylinders. DRIVE MOTOR: 2 electric motors, 2 kW, 24 V AC, insulation class H PUMP MOTOR: Electric motor 3 kW, 24 V DC, insulation class H PROPULSION: Electronic speed control, MOSFET type BATTERY: 24 V 420 Ah, with charge indicator POWER TRANSMISSION: Front axle driven by 2 gearboxes Rodjwtppzspfx Ahwjp WHEELS: Front: super-elastic, 18x7-8", 2 units; Rear: super-elastic, 15x4 ½-8", 2 units BRAKES: Automatic brakes on front wheels STEERING: Rear wheel steering via electric motor. Max. steering angle ± 90° CONTROLS: Operated via radio remote control HYDRAULIC SYSTEM: Driven by low-noise 3 kW gear pump. Cylinders operated by electro-proportional valve block with radio remote control. Filter and safety valve. Max. working pressure 22 MPa. SAFETY DEVICES: Electronic load moment indicator and limiter STANDARD EQUIPMENT: • Maximum capacity 2.5 t • Front-wheel drive via 2 reducers (one per wheel) • Hydraulic telescopic boom (1 fixed section, 2 telescoping sections) • Manual mechanical boom extension • Battery set 24 V 420 Ah • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio remote control for boom and drive wheels • Electronic CE-compliant load indicator and limiter • Boom tilt angle +60° / -15° • CE conformity declaration • Operating manual, technical documentation, declarations INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tyres • Battery water replenishment system • On-board mobile charger • Manual 3-position jib (1.0 t)

Kondisi: baik (bekas), Plant: REWA Chamber Filter Press Used Model: 470-15-25K-HP Design: Side beam guided Filter plate size: 470 x 470 mm Number of plates: 15 Rodeqakbrjpfx Ahwjp Filter plates: PP Filter cloths: optionally available, tailored to the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (wetted parts): flanges and thru-rods stainless steel, PP or rubber-coated Material (non-wetted parts): stainless steel Purchase or Rental: Systems can be inspected at our facility by appointment. Miscellaneous: We supply the plant either used and operational, or refurbished and customized according to your requirements. Interested in buying or renting this unit? Please contact us – we will be happy to assist you.

Tahun pembuatan: 2009, Kondisi: diremaj di bengkel (bekas), The roller stand is also available for rental (including trial rental). Maximum load: 100 t per set, consisting of 1x drive unit and 1x idler unit Workpiece diameter: 500 – 7,500 mm Rotational speed: approx. 130 – 1,250 mm/min Roller material: polyurethane Control: wired hand pendant Rjdpfxsmk Ikte Ahwop Additional available options, e.g.: additional idler units, foot switch

Tahun pembuatan: 2022, Kondisi: baru, Payload capacity: 10,000 kg Rotational speed: 0.03 - 1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transfer: 800 A Redpfxofxgp Uj Ahwop

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, kapasitas angkut: 5.000 kg, tinggi angkat: 25.000 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, panjang garpu: 1.200 mm, jenis penggerak: Diesel, Rotating telehandler Mast type: Quattro Condition: New machine Technical condition: New Front tyres type: Pneumatic Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres condition: 80 - 100% Redpfew Eqdksx Ahwep Description: The vehicle undergoes UVV (accident prevention regulation) inspection. A&M pallet fork carrier set including 1200mm pallet forks, 1500mm pallet fork carriage, and 5t load hook included. 3rd valve, 4th valve, heater, German road approval (STVZO), full cab, CE certificate, 3rd valve, 4th valve, heater, STVZO, full cab, CE certificate, TÜV/Dekra homologation, 20 km/h, 45% locking differential on second axle, two front swiveling LED lights on cab, two rear swiveling LED lights on cab, set of additional stabilizer platforms, 455/70 Michelin wheel set, standard carriage plate, remote control with 2 joysticks, automatic wheel alignment, kit for driving with upper carriage rotated by 180 degrees, wired reversing camera, 3-sided personnel basket 120 x 240 cm, 5.0 t winch to be mounted on the carriage. Including work basket and winch.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 610 mm, berat benda kerja (maks.): 1.500 kg, tinggi total: 24.920 mm, panjang total: 43.670 mm, lebar total: 30.700 mm, panjang meja: 1.600 mm, lebar meja: 700 mm, daya motor spindle: 11 W, pergerakan cepat sumbu Z: 24 m/menit, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, hidung spindel: Iso 40, kecepatan spindel (maks.): 8.000 rpm, kecepatan spindel (min.): 40 rpm, diameter alat: 75 mm, panjang alat: 250 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, NEW Vertical Machining Center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Included accessories: - Rotary table preparation - External spindle air blast - Left-side auger-type chip conveyors - Automatic high-pressure coolant system through the spindle at 20 bar - Workpiece washdown gun - Enclosure base wash system - 390-liter coolant collection tank Rsdpfx Aerkn Iishwjp - 3-color end-of-cycle signal lamp - Full auto power-off system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Winch incl. Maximum lifting capacity: 2 tons at 2.7 meters Maximum lifting capacity: 1 ton at 5.3 meters Rsdpfxeq N E U Ao Ahwep Operating hours: 270 h Electric: yes

Kondisi: baru, Saw blade diameter 420 x Ø 40 mm Cutting diameter 170 mm Cutting length 410 mm Saw blade dimensions 420x3.2/2.4x40 mm Speed 3,500 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 120 kg Space requirement approx. 1300 x 800 x 1600 mm - Cross-cut and mitre circular saw for cross-cutting applications * Drive motor 3.0 kW - 400 Volt - Double-sided mitre adjustment (60° / 45°) with fixed stops - Compound mitre cuts on both sides at 45°, with fixed stops - Robust cast iron construction - Precision recirculating ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Continuously height-adjustable saw blade - Port for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Rsdjxabztopfx Ahwep Special accessories included: - Compound mitre adjustment via handwheel, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative, for aluminium and plastics - Continuously adjustable hydraulic feed brake - Pneumatic material clamping from above, standard equipment: * 2 vertical clamping cylinders, adjustable, with manual lever valve - 1x machine stand - More powerful drive motor (3.0 kW)