Pengangkat vakum

FINKEN VH 8-1000

EN: Load capacity 1,000 kg
Number of suction pads: 8
Suction pad diameter: 280 mm

Vacuum Lifter VH 8-1000
For horizontal transport of smooth, dry, and airtight panels.
Robust load-bearing frame made from steel, painted in RAL 2000, with low dead weight.

Consisting of:
- 1x Galvanized longitudinal beam, length 2,400 mm
- 4x Galvanized cross beams, each 1,000 mm long
- 8x Spring-loaded, articulated, and adjustable suction pad holders
- 8x Suction pads, Ø 280 mm; in case of wear, the seal can be replaced separately from the metal carrier, affordably and without tools
- 8x Ball valves to deactivate individual pads, enabling lifting of smaller formats without the need to move suction pads or cross beams
- 1x Coiled connector cable (short spiral):
* Extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling
* Routed alongside the load chain to the lifting device

- Low-maintenance, high-quality, oil-lubricated rotary vane vacuum pump with a suction capacity of 21 m³/h and an ultimate vacuum of 98% (20 mbar)
- Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control panel (required if lifter is connected via the crane trolley and no neutral conductor is present).
- Operator handle extendable to 1,000 mm from beam center. Sturdy sheet metal holder for your crane controls included at no extra cost.
- Operation “Suction / Release” via hand slide valve:
The wear-free, highly robust slide valve ensures secure attachment and release after the unlock button is pressed (double release according to EN 13155).
- Controls and safety features for vacuum lifter:
* Rugged control box
* Contactor control for vacuum pump
* Safety alarm with acoustic signal
* Vacuum gauge with danger zone indicator
* Large vacuum reservoir with safety check valve
* Double-acting release function
- Fine dust filter to protect the vacuum pump
- Comprehensive and easy-to-understand documentation.
- Warranty: One year for material and manufacturing defects under single-shift operation (excluding wear parts). Initial inspection UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155
- Packaging suitable for truck transport.

FR: Capacité de charge 1.000 kg
Bjdpenlb Rzjfx Apcjdd
Nombre de ventouses : 8
Diamètre des ventouses : 280 mm

Élévateur à vide VH 8-1000
Pour le transport horizontal de panneaux lisses, secs et étanches à l’air.
Construction robuste en acier, peint en RAL 2000, avec faible poids propre.

Composé de :
- 1x Traverse longitudinale galvanisée, longueur 2.400 mm
- 4x Traverses transversales galvanisées, chacune de 1.000 mm
- 8x Supports de ventouse ressortis, articulés et réglables
- 8x Ventouses Ø 280 mm ; le joint peut être remplacé séparément du support métallique, sans outil et à moindre coût, en cas d'usure
- 8x Vannes à bille pour couper individuellement des ventouses, permettent aussi de soulever des formats plus petits sans déplacer les ventouses ou traverses
- 1x Câble spiralé petite spirale :
* Extensible jusqu’à 3.500 mm, fourni avec fiche et prise CEE
* Guidé le long de la chaîne de charge jusqu’à l’appareil de levage

- Pompe à vide à palettes rotatives lubrifiée à l’huile, très haute qualité et faible entretien, débit d’aspiration 21 m³/h, vide final 98 % (20 mbar)
- Alimentation électrique : triphasé 230/400 V + PE, 50 Hz, avec câble (env. 0,5 m) et fiche CEE (16 A). Transformateur d’isolement intégré au

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.