De

FORMAT4 Profit H500S 16.56

Kondisi: bekas, nomor mesin/kendaraan: 008167, arbeitsbereich_achse_x_y_spindel Dkedpfsx A Hczjx Aaqsl

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Djdexy Tmnjpfx Aaqjkl Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, Tahun pembuatan: 2011, Besar area kerja pada arah X: 2770 mm Besar area kerja pada arah Y: 1220 mm Ketebalan pemrosesan (ukuran Z): 80 mm Konstruksi mesin: mesin portal Daya spindle utama: 11,0 kW Kecepatan spindle utama: 1500 - 24000 rpm Spindle dengan kontrol vektor: Ya Sistem penjepitan: HSK 63 F Pendingin spindle: Pendingin udara Jumlah sumbu: 3 Penukar alat: Ya Tempat alat: 10 unit Keyboard mesin tik: Ya Mouse: Ya Sistem program: Xilog Plus DXF Interface: Ya Koneksi online memungkinkan: Ya CD Rom Drive: Ya Tipe meja: meja grid Sistem pemberhentian: silinder pemberhenti Jumlah pompa vakum: 1 Kapasitas pompa vakum: 250 m³/h Pengaman: alas pijakan keselamatan Lokasi gudang: Sonnefeld Dkodpfx Aajvvi Htjqol

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.670 mm, jarak gerak sumbu Z: 500 mm, jumlah sumbu: 4, This 4-axis CNC machining center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1,000–24,000 rpm and a C-axis rotation of 0–360°. The machine is equipped with a 12-position linear tool changer and a comprehensive drilling head with 16 spindles. Additionally, it offers a robust safety system with a light barrier. Take advantage of this opportunity and purchase this Felder Format 4 Profit H 200 CNC machining center. Contact us for further details on this machine. • Automatic central lubrication • Working area: X 3,300 mm / Y 1,280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operator terminal on the left side of the machine • Hand-held terminal with axis speed control and emergency stop • Software: Woodflash (CNC panel, tool database, program editor) • Position display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction capacity 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1,000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-position linear on the left side of the machine frame, including holder for aggregates; max. tool diameter 250 mm; max. tool length 240 mm • Drilling head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); advance stroke 70 mm; drilling depth 70 mm; shank Ø 10 mm • Grooving saws: 2 (one X, one Y); max. blade Ø 120 mm; max. thickness 5 mm; infinitely variable speed up to 7,500 rpm • Safety: Front-side light curtain system Dkedpfx Aaex D D Hmsqjl

Kondisi: baik (bekas), BIESSE ARROW ATS 5-AXIS CNC MACHINING CENTRE NC1000 Dksdeukcy Eopfx Aaqol Machining head with revolver-type automatic tool changer BH39 drilling unit, 250m³/h vacuum pump (This machine was in operation for 10 years in a woodworking school)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine, which we are offering for sale. Contact us for further information. Worktable and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of the panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), pneumatic system Dksdpfxsx D H Hce Aaqjl • 4 removable central stops, stroke 140 mm (2 left + 2 right), pneumatic system • Sensor for detection of lowered stops • Pneumatic system for lifting rod supports • 6 lifting rod supports for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum system Processing Units and Configuration • Configuration C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis processing unit • Flange for mounting units on a 5-axis interpolating machining head (units can only be used when the electric spindle is vertical) • Configuration C3-P2: • Additional Z-slide for rear processing units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for removing chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: bekas, nomor mesin/kendaraan: 008319, Arbeitsbereich Achse X: 6380 mm Djdpfxjx A Tc Ij Aaqekl Arbeitsbereich Achse Y: 1380 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Leistung Haupt-Spindel: 11 KW Anz. kontrollierte Achsen: 5 Achsen Anzahl Werkzeugplätze: 32

Kondisi: bekas, Working width: 410 mm Joiner table length: 1450 mm Number of planer knives: 4 pcs Motor power: 4 kW Dimensions (L/W/H): 2650 x 850 x 1100 mm Machine weight approx.: 750 kg Surface Planer F 410 N ----- Technical manufacturer description: Dodpjwzmu Djfx Aaqokl Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Infeed table length: 1450 mm Aluminum fence tiltable up to 45° Planer fence dimensions: 1100 x 170 mm 4-knife cutterblock, diameter: 120 mm Cutterblock speed: 5000 rpm Motor power: 4 kW TERSA monoblock reversible knife cutterblock (disposable knives) SCM planing guard integrated in machine base Extraction port: 120 mm diameter Manual star-delta switch Motor protection switch with undervoltage release Main switch, lockable Automatic motor brake Tiltable auxiliary fence ----- Price of the above-mentioned machine on request! ----- (Technical data according to manufacturer – no liability assumed!) All prices quoted net, plus statutory VAT.

Kondisi: bekas, Tahun pembuatan: 2018, Price: On request CNC Machining Center SCM ACCORD 25 FX Brand: SCM Model: ACCORD 25 FX Year of manufacture: 2018 Machine no.: AA10000992 Machining table dimensions: 5020 x 1380 mm (L x W) Worktable equipped with 2 vacuum zones Worktable equipped with 2 reference stops Includes 8 positioning pins and 8 supports XY Vector Speed: 35 m/min Axis movements Max. X-axis speed (per zone): 25 m/min Max. X-axis speed (traverse): 90 m/min Dedpfjycwupox Aaqjkl Max. Y-axis speed: 90 m/min Max. Z-axis speed: 30 m/min Control system Machine control: KVARA Control Windows Embedded Standard 7-64bit Hard drive capacity: 500 GB - 7200 rpm Microprocessor: Intel Pentium 2.9GHz RAM: 8GB DDR4 XILOG-MAESTRO software package Including vacuum pump Motor power: 5.5 kW Pump capacity: 250 m³/h Max. vacuum: 0.9 bar Overall dimensions: 9000 x 4500 x 3000 mm (L x W x H) Total weight: 7,500 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: AA10000992 - Number of milling spindles: 2 └ Milling spindle 1: - Number of controlled axes: 3 - Min. spindle speed: 6,000 rpm - Max. spindle speed: 18,000 rpm - Main motor power: 15 kW └ Milling spindle 2: - Number of controlled axes: 3 - Min. spindle speed: 600 rpm - Max. spindle speed: 24,000 rpm - Main motor power: 12 kW - Type of routing table: Beam table - Tool holding system: HSK-F63 - Tool changer positions: 12 - System/software: SCM Maestro - Safety feature: Bumper - Vacuum pump available: Yes └ Quantity: 1 └ Brand: Becker └ Main motor power: 5.5 kW └ Capacity: 250 m³/h - CNC options: Waste conveyor - Table length: 5,020 mm - Table width: 1,380 mm - Y working area: 1,300 mm Financial information VAT: The indicated price is exclusive of VAT VAT/differential taxation: VAT is deductible for business customers Delivery and trade-in possible at any time for all types of industrial equipment Glenn Smeets

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, This 4-axis BIESSE Rover S FT 1536 was manufactured in 2018. It features a rigid gantry design, a working area of 3765 × 1560 mm, and a main spindle power of 13.2 kW. The machine is equipped with an HSK-F63 tool holder system, a 12-position rotary tool changer, and a BIESSE BH 10 boring unit offering extensive vertical and horizontal drilling options. Additional features include a grid vacuum table, two 500 m³/h vacuum pumps, and compatibility with DXF files. Contact us for more information about this machine. Dkjdpfxjx D Iqve Aaqel • Weight (kg): 3000 • Main spindle: 1 spindle, 13.2 kW • Axes: 4 • Working area (X × Y): 3765 × 1560 mm • Torque support: 4th axis (C-axis rotation) • Tool holder system: HSK-F63 • Tool changer positions: 12 (rotary changer) • Tool length measurement: Yes • Boring unit: Vertical drills: 10, Horizontal drills: 4 (X-direction), 2 (Y-direction) • Grooving saw: In X-direction • Vacuum table: Grid table • Vacuum pumps: 2 × 500 m³/h • Extraction system: Cleaning-arm discharge unit • Lubrication: Automatic • Air blow device: Yes • Control system: Interface with DXF file compatibility • CE marked: Yes • Tools, tool holders, aggregates, and mechanical clamps shown in the photos or videos are not included in the scope of delivery.