Magnetgleitschleifmaschine

Forplan Ergomag PM 3000

Kondisi: baru, Tahun pembuatan: 2026, berat keseluruhan: 400 kg, * 250 L net volume * Dosing pump included * Highly wear-resistant polyurethane lining (90 Shore) * High-performance three-phase drive motor * Interchangeable valve for wastewater discharge * Main switch and emergency stop switch * Timer and operating hours counter * Specially designed control panel (EU standards) included Ijdpjh I N Udofx Aklsig

Kondisi: belum diuji (bekas), Tahun pembuatan: 1996, berat kosong: 800 kg, diameter 1.5 - 160 MM Iiedpfjwgm Saox Aklog stroke 400 MM weight 800 KGS tooling

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Kecepatan putaran hingga: 2250 rpm Kecepatan pemasukan: 0 - 300 mm/menit Daya penggerak per motor: 2,9 kW Koneksi listrik: 400 V Berat: 395 kg Kebutuhan ruang: 4100 x 1670 x 1450 mm Ijdpfx Akoyfgd Ejljig

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), jumlah sumbu: 2, This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated digital XY and angle readouts for precise measurements. The device is equipped with a 3-position objective turret for rapid magnification changes and high-quality halogen illumination for clear images. Ideal for production control and precision engineering. Please contact us for further information about this machine. • Laterally correct image (no mirror inversion) for straightforward evaluation • 3-position objective turret for quick magnification selection • Magnifications: 10×, 20×, 50×, 100× • Screen diameter: 305 mm • Measuring stage travel: 250 × 150 mm (8" × 6"); rotary table type 2 • Maximum workpiece height: 100 mm • Integrated XY and angle digital display for accurate readings • Illumination: combination of contour (transmitted light) and vertical light (incident light) • Light source: 24 V / 150 W halogen for high-quality projection Iijdpfxox D I Eto Akljg • 4-position condenser in transmitted light with automatic brightness adjustment according to magnification • Optics: semi-transparent mirror for clear incident light imaging; telecentric lenses for distortion-free imaging across the entire field • Focusing via movable optical head (table remains stable to avoid measurement deviations) • Measurement accuracy: contour illumination ±0.1%; inclination/surface illumination ±0.15% • Solid construction with precision-engineered guides; suitable for workshop use and easy to operate • Proven Nikon quality, made in Japan • Large projection area, suitable for medium-sized and complex workpieces • Fast magnification change via turret • Ideal for production inspection, toolmaking, precision mechanics, and sample testing • Upgradeable with digital interfaces or SPC connectivity

Kondisi: baik (bekas), Vibratory bowl, vibratory finishing system, vibratory finishing machine, vibratory round bowl, trowalizing system, continuous flow vibratory machine, vibratory feeder, oscillating conveyor Iiodpfx Aeiy Ef Aoklsg - Manufacturer: circlon, Round vibratory bowl type Trowal-vibrator with soundproof enclosure - Total volume: 230 liters - Model: CLS-230 - Work container: elastically mounted - Trough width: 250 mm - Outlet: approx. 200 x 260 mm - Trough height: 510 mm - Equipment: manual separation flap, infinitely variable motor speed via variator gearbox, liquid connection - Machine suitable for: deburring, polishing, edge rounding - Transport dimensions: 1700/1600/H2240 mm - Total weight: 1150 kg

Kondisi: bekas, Deburring and Finishing Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, deslagging, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt length: 2620 mm Standard with vacuum holding system, optionally with magnetic holding system By using 2620-mm-long abrasive belts, you achieve a uniformly smooth surface and reduce consumable costs, as these belts have a longer service life. Due to the modular design of the machine, it is possible to offer the optimal configuration for each customer’s processing needs. The machine structure can accommodate up to 3 internal processing units and one additional external processing unit. The high rigidity of the machine frame and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing tasks. Ijdpfx Ajm Rpy Rjklsig Please contact us for more information and pictures via mail(at) or

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 16.432 h, Fungsionalitas: berfungsi sepenuhnya, 𝗦𝘁𝗮𝗿 𝗦𝗥20 𝗝 tipe 𝗖 Ijdpfxezmw Dko Aklsig Tahun pembuatan 2015 Jam operasi: 16.432 jam Tangki oli Pemuat batang Iemca Ban berjalan untuk komponen Fanuc Command 31i Model B

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, lubang spindel: 19 mm, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Maximum workpiece length: 200 [mm] - Spindle speed: 15,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB-SPINDLE - Maximum bar diameter: 16 [mm] - Z-axis travel: 80 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 1.1 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL TURRET 1 - Number of positions: 10 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] FRONT TOOLING - Number of positions: 4 SECONDARY OPERATIONS - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 200 [V] - Total power consumption: 8 [kW] WEIGHT AND DIMENSIONS - Required floor space: 1850 x 1610 [mm] - Machine height: 1050 [mm] - Machine weight: 2050 [kg] Iijdpjw Rcamefx Akljg ACCESSORIES - Control: Fanuc 31i - Guided bush - Parts removal device - Parts ejector - Coolant tank - Bar feeder: IEMCA BOSS 332r - Electrical transformer

Kondisi: belum diuji (bekas), Number of sanding units: 4 units Sanding width: 190 mm Maximum sanding height: 4-180 mm Weight: 4,200 kg Hess Expert 4-Belt Single-Piece Wood Sanding Machine - Sanding from below/above - Each with two staggered sanding units (top and bottom) - Sanding units (top and bottom) arranged sequentially according to the planing principle - Pre-sanding with coarse grit (calibrating) - Fine sanding with fine grit (finishing) - Central motorized height adjustment of the lower sanding units - Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including upper transport units Isdpst Tqy Eofx Akloig - Oscillating belt use (during the sanding process) - Absolute power transmission through 5.5 kW motors and large-diameter drive drums - Oxide-ceramic sanding shoe for - Precise surface geometry - No re-adjustment required - Permanent dimensional accuracy - Completely maintenance and wear-free Basic design: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration dampening. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction system for direct and airborne dust with sealing brushes and integrated sanding belt blow-off device, extending the sanding belts' service life. Sanding units in heavy-duty steel plate construction as the basic foundation for vibration-dampened, smooth belt tracking. Absolutely backlash-free guides as ball linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded guide carriages. Permanent precision ensured by dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers as contact rollers. Contact rollers and sanding shoes in a balanced ratio to the sanding belt grain load. The large-diameter drive drums guarantee full transmission of the 5.5 kW drive power from the sanding motors to the sanding belt. Therefore, slip-free, stable operation and optimal heat dissipation. Enables the strongest stock removal possible. Automatic machine stop triggered in case of belt breakage. Optical display on the control panel and via flashing light on the machine. Finish sanding shoes are completely maintenance and wear-free, made from oxide-ceramic with optimal heat dissipation. Sanding belt tensioning via appropriately dimensioned pressure springs. Sanding belt release for belt changes via a pneumatic device for sensitive, distortion-free application of new belts. The upper sanding unit and brushing device are centrally motorized and height adjustable with digital display on the control panel for motorized sanding thickness adjustment. Brushing and finishing device, for improved surface finish, integrated into the main machine. Two special brush rollers, 150 mm diameter, arranged one above the other and operating in the direction of feed. Separate height adjustment of the brush rollers on precise guided carriages for wear compensation. Additional transport roller for removal or further transport of the workpiece from the sanding machine, coupled with the conveyor belt. Wood guide in the infeed area for hard, double-sided...

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 950 kg, Panjang sabuk amplas 2200 mm, lebar sabuk amplas 400 mm, panjang meja 1200 mm, tinggi kerja 120 mm, lebar pengamplasan 390 mm, kecepatan sabuk amplas sekitar 21 m/detik, kecepatan pemajuan 6 - 11 - 16 m/menit, motor penggerak 7,5 kW, motor pemajuan 0,26 - 0,55 - 1 kW, osilasi sabuk dan peniupan sabuk pneumatik, penopang rangka, sasis Isdpfx Akexq Ehxolsig