Mesin penggiling profil optik

Fritz Werner SP

Kondisi: baik (bekas), diameter penggilingan: 1.600 mm, panjang penggilingan: 6.000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 steady rests hydrostatic Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Center height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Approximate dimensions: Length: 15,100 mm Width: 5,500 mm Height: 3,550 mm Bedpfx Aevvvw Ejf Sslc Weight: 120,000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, no representation or contractual terms will be constituted. We recommend verifying all critical details independently.

Kondisi: baik (bekas), Tahun pembuatan: 1988, Operating voltage: 380 V Bljdpfjw Dvkaox Af Sec Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main data: Table surface: 605 x 300 mm Max. longitudinal table travel (manual): 750 mm Cross table travel: 340 mm Grinding height (min./max., table to new grinding wheel): 22.5 / 322.5 mm Standard magnetic chuck size: 600 x 300 mm Workpiece weight incl. magnet: 420 kg X-Axis / Longitudinal Travel: T-slots (number x width): 3 x 17 mm Table feed, hydraulic: 0.3 – 25 m/min Travel per handwheel revolution: 47 mm Y-Axis / Vertical Feed: Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm Graduation per handwheel division (x1/x10): 0.001 / 0.1 mm Spark-out strokes: 0 – 5 Rapid traverse: 400 mm/min Z-Axis / Cross Travel: Automatic cross feed, intermittent: 0.5 – 20 mm Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min Travel per handwheel revolution: 5.0 mm Graduation per handwheel division: 0.02 mm Standard grinding wheel: Diameter x width: Ø 355 x 38 (50) mm Bore: Ø 127 mm Speed: 1500 rpm Accessories: various grinding wheels Documentation

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 655 mm, diameter pembubutan di atas alas geser: 655 mm, panjang pembubutan: 5.000 mm, Diameter ayun di atas alas 655 mm Diameter ayun di atas penyangga 390 mm Panjang pembubutan 5000 mm Lubang spindle 82 mm Bsdpfx Aew N D T Sef Solc Kecepatan spindle 9-1120 rpm Kecepatan pemakanan 0,049-3 mm/putaran Daya terpasang total 12 kW

Kondisi: baik (bekas), Tahun pembuatan: 1963, Vertical turning lathe Manufacturer: JUNGENTHAL Type: DK 1400 Year: 1963 with 1-axis digital readout. Max. turning diameter: 1400 mm Bjdovi Hryjpfx Af Selc Faceplate: 1250 mm Automatic turret head Spindle speeds: 3.5 - 180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For further specifications, see data sheet. Machine documentation available. Machine dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t Good overall condition.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Electronics: Blederz Nflspfx Af Ssc The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Kondisi: bekas, Tahun pembuatan: 1977, Surface grinding machine, manufacturer: Okamoto, model: PSG-63UA, year of manufacture: 1977 Magnetic chuck: 600 mm x 300 mm. Bljdpfx Asiz Tmkef Soc Grinding capacity: longitudinal 630 mm, cross 310 mm, height 350 mm. Ready for operation.

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Blodpfocc D Ddsx Af Sjc Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Kondisi: bekas, Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C3300, panjang penggilingan: 4.500 mm, lebar penggilingan: 300 mm, panjang meja: 4.500 mm, lebar meja: 300 mm, kebutuhan tinggi: 2.500 mm, persyaratan ruang panjang: 13.700 mm, lebar yang dibutuhkan: 2.500 mm, Reform AR45 T9 ZU C3300/86 Year of manufacture: 1986 Grinding length: 4500 mm Grinding width: 300 mm Workpiece height: 250 mm Table or grinding arm swivel range: ±90 degrees Bledpfxetqtn Ds Af Ssc Segment head diameter: 560 mm Spindle diameter in front bearing: 120 mm Swivelable: 2° Max. torque: 719.5 Nm Motor: B280, 55 kW Grinding spindle speed range: 0–730 rpm Control: BBC Baumüller drives Marposs measuring system Hydraulic clamping Grinding mist extraction unit: Hydrocyclone cleaning system Additional grinding unit ZU Feed rate: 2000–35000 mm/min Space requirement approx. 13.7 x 2.5 x 2.5 m

Tahun pembuatan: 2001, Kondisi: bekas, Detail Teknis: Perjalanan-x: 400 mm Perjalanan-y: 300 mm Perjalanan-z: 500 mm Luas bidang penjepit meja: 400 x 300 mm Bodpfx Afeikbtno Sjlc Kapasitas beban meja: 50 kg Kontrol - semi otomatis: LASERSOFT 3D Daya laser: 100 W Total kebutuhan daya: 27 kVA Berat mesin kira-kira: 2,5 t Kebutuhan ruang kira-kira: 3 x 3,5 x 2,8 m Mesin Laser CNC untuk Gravir/Penandaan/Kontur Sekitar 9.000 jam menyala, sekitar 5.500 jam kerja

Kondisi: bekas, Tahun pembuatan: 1992, en-GB:Technical Details: Spindle diameter: 100 mm X-axis travel: 1,500 mm Y-axis travel: 1,450 mm Z-axis travel: 930 mm W-axis travel: 506 mm B-axis (table): 360° Control system for programming: HdH TNC 407 Tool holder: SK50 Spindle speed: 5 – 1,600 rpm, stepless Table load capacity: 4.0 t Table size: 1,100 x 1,400 mm Table rotatable: 360° Feed rates (X/Y/W/Z axis): 2 – 2,000 mm/min Rapid traverse (X/Y/W/Z axis): 5,000 mm/min Total connected load: 40 kW Electrical cabinet dimensions: 2,000 x 600 x 2,000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Approx. machine weight: 14 t Blodpfxeu Idqbs Af Sjc CNC drilling and milling machine with hydraulic unit Equipment: - Touch probe - Electronic handwheel - Hydraulic weight compensation for Y-axis - Universal milling head - Various accessories available—please enquire! Subject to prior sale.