Press spindel manual

Fritz Werner TC 800

Kondisi: bekas, Tahun pembuatan: 1986, Mesin: TC800 Nomor seri: 25132 Tahun pembuatan: 1986 Pengendali: Sinumerik System 8. Spindel alat: SK50 Perjalanan sumbu X: 1600 Y: 1000 Z: 1100 Isdpfx Agsx Eyt Us Rstd Sistem pengukuran optik pada sumbu X, Y, Z 2 palet, luas meja: 800x800 Sistem pergantian palet Majalah alat: 60 alat Catu daya: 380V 50Hz 55kW.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 5.000 h, Fungsionalitas: berfungsi sepenuhnya, de-hu-steuerung-haas-2024 Iedpfxsxva Ahe Ag Retd

Kondisi: bekas, en_001_TechnicalDetails_2024-06-18 Itodevr S Uljpfx Ag Red

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Iedpfoxwdygsx Ag Rjtd Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 3.000 mm, - CNC control Heidenhain TNC 415B - Programmable 2-axis NC milling head, 2.5° - Coolant system The machine is sold without the platen table Accessories: Isdpfx Aowrzkzeg Retd Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Various spare parts such as bevel gears for the milling head and a ball screw for the X-axis. Technical data: X-axis travel (longitudinal): 10,000 mm Y-axis travel (cross): 1,500 mm Z-axis travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed range (2-step): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main drive power (100% duty cycle): 37 kW Machine weight approx.: 39,300 kg Technical data, accessories, and machine description are not binding.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control: SIEMENS 840 D w-axis 1500 mm Column clearance: 2500 mm Clamping surface: 3000 x 2000 mm Workpiece weight capacity: 10,000 kg Spindle speeds: 5-6,000 rpm Gear stages: 2 Drive power - milling spindle: 45 kW Distance spindle to clamping spindle: 3500 mm Spindle torque: 1,250 Nm Tool changer capacity: 200 positions Tool diameter: 135 / 250 mm Max. tool weight: 50 kg Max. tool length: 400 mm Isdpjvwgmmjfx Ag Rotd Tool holder: ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angle milling head yes Automatic tool clamping yes Ball screw drives yes Guideway covers yes Coolant system yes High pressure cooling system (internal coolant supply) yes Fully enclosed work area yes Portal machining center with tool changing system and second table plate.

Kondisi: bekas, Tahun pembuatan: 2013, nomor mesin/kendaraan: 5279, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.600 mm, jarak gerak sumbu Z: 1.300 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 22 rpm, Year of manufacture: 2013 Control system: SIEMENS Sinumerik 840D pl Tool holder: HSK 100-A TRAVEL PATHS Horizontal (X-axis): 8,000 mm Vertical spindle slide (Y-axis): 1,600 mm Horizontal/Traverse spindle (Z-axis): 1,300 mm WIRELESS PROBE: m&h HSK 100 SIEMENS OPERATOR HANDHELD UNIT B-MPI RIDE-ALONG WORK PLATFORM 3-SIDED SPLASH AND CHIP GUARD WALL CHIP CONVEYOR CLAMPING PLATE Dimensions: Length: 10,000 mm, Width: 2,500 mm WASHING GUN IN THE WORK AREA REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2,000 l 2-CHANNEL COLLISION MONITORING SYSTEM 2 monitoring channels: – 1. Collision monitoring for orthogonal milling head (Channel 1) – 2. Collision monitoring for fork milling head (Channel 2) PENDULUM OPERATION, 3 WORKING AREAS MULTI-AXIS INTERPOLATION FOR FREE-FORM SURFACES (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATIONS For fork head, mounted on clamping plate – 10 tool positions – Maximum tool weight: 12.5 kg – Maximum tool length: 200 mm – Maximum tool diameter: 63 mm – Maximum tool diameter with free adjacent slot: 250 mm – Tool holder HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine: 48 Itsdpfeu Sppwjx Ag Rsd Maximum tool diameter (full magazine): 125 mm Maximum tool diameter (with free adjacent slots): 250 mm Maximum tool length: 500 mm Maximum tool weight: 25 kg Maximum tool load torque: 40 Nm Tool holder: HSK 100-A HEAD CHANGE MAGAZINE 1 PIECE FORK HEAD WITH HIGH-FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE – High-frequency milling spindle – Integrated high-frequency spindle – Tool holder HSK – A 63 DIN 69893 – Main drive power: 20 kW at 100% duty cycle or 25 kW at 40% duty cycle – Speed range up to 20,000 rpm – Motor spindle bearings with lifetime grease lubrication – Sealed with air purge – Torque: 40 Nm at 100% duty cycle, 50 Nm at 40% duty cycle – Automatic tool clamping – Power transmission according to RPM-power diagram GMN HCS 170 – Technical data per datasheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN – Liquid-cooled milling head – Cast construction from GGG 60 – Milling head, automatically swiveling, 180 x 1 degree – The resulting positions can be accessed via CNC control, programmed, and executed – Repeatability at spindle nose: ±0.002 mm, positioning accuracy ±3 seconds – Tool holder: HSK 100-A – The milling spindle is equipped with a hydromechanical quick-change system – Tool clamping force: 45 kN – Internal coolant supply Form A-D – External coolant supply via shower ring – Speed range: 22-4,000 rpm MAIN DRIVE Through a frequency-controlled liquid-cooled AC motor with 32 kW drive power at 100% duty cycle and 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. – 637 Nm torque at 100% duty cycle, 875 Nm at 40% duty cycle.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, de Itsdpfx Agoylmc Is Rjd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 508 mm, produsen pengendali: HAAS, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.400 W, jumlah sumbu: 5, This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Take the opportunity to purchase this HAAS UMC-750SS vertical machining center. Contact us for further information. Additional Equipment • Coolant tank – 208 liters with mobile trolley • Programmable coolant pump (M-code controlled) // Programmable coolant nozzle (P-COOL) • Safe Run – Crash and overload detection system • Surge protection in the control cabinet • Voltage fault detection module (EPFDM) • Second button for home position • Remote jog handle with 2m cable (RJH-XL) • Memory lock key switch • Scales for rotary axes • Top cover Machine Advantages Technical machine advantages • Side-mounted tool changer with 30+1 tools • Wireless Intuitive Probing System (WIPS) • Broken tool detection (BTD) Iedsx U Tizepfx Ag Retd Additional Information Media display via M130 (images, videos, PDFs on screen) Standard machine memory: 1 GB Control Unit 15" color LCD monitor with USB port Touchscreen control interface Ethernet interface HaasConnect remote monitoring HaasDrop wireless file transfer WiFi connectivity Control High-speed machining (HSM) Rigid tapping Dynamic Work Offset / Tool Center Point Control (DWO/TCPC) Macro programming, coordinate rotation and scaling

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, CNC HAAS VF-2SS 2011 2 UNIT CNC HAAS VF-2SS Iedpfxsyh Rwxs Ag Rotd 2011 FUNGSIONAL