Tekan membran

FRIZ MFP 15/27

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Codpfx Aog Ezarohrerf Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.

Kondisi: baru, Tahun pembuatan: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Codscqvhwjpfx Ahrsrf Pipe diameter: 180 mm Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.670 mm, jarak gerak sumbu Z: 500 mm, jumlah sumbu: 4, This 4-axis CNC machining center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1,000–24,000 rpm and a C-axis rotation of 0–360°. The machine is equipped with a 12-position linear tool changer and a comprehensive drilling head with 16 spindles. Additionally, it offers a robust safety system with a light barrier. Take advantage of this opportunity and purchase this Felder Format 4 Profit H 200 CNC machining center. Contact us for further details on this machine. • Automatic central lubrication Credpfx Ahox D D Hmsrjf • Working area: X 3,300 mm / Y 1,280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operator terminal on the left side of the machine • Hand-held terminal with axis speed control and emergency stop • Software: Woodflash (CNC panel, tool database, program editor) • Position display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction capacity 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1,000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-position linear on the left side of the machine frame, including holder for aggregates; max. tool diameter 250 mm; max. tool length 240 mm • Drilling head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); advance stroke 70 mm; drilling depth 70 mm; shank Ø 10 mm • Grooving saws: 2 (one X, one Y); max. blade Ø 120 mm; max. thickness 5 mm; infinitely variable speed up to 7,500 rpm • Safety: Front-side light curtain system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, frekuensi input: 50 Hz, tegangan masuk: 400 V, tekanan: 6 batang, LiSEC, KSR-25, right-left operation, year of manufacture 2010 Vertical glass seaming line, height=2.50 m In fully automatic operation, the compact grinding machine seams the edges of glass panes on all four sides. Inspection during production possible by appointment. In very good working condition. Available: March / April 2025 Cedjv Eguyepfx Ahrorf

Kondisi: baik (bekas), Tahun pembuatan: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel dimensions (20 mm thickness): 2340 x 1240 mm Working chamber height: 60 mm Total thrust: 300 t Maximum working specific pressure: 5 kg/cm² Crjdpfxotwba Ss Ahrjf Pressing cylinders: No. 6, diameter 140 mm, stroke 250 mm Lower movable platen (closing movement from bottom to top) Opening between press platens: 230 mm Loading side: 1400 mm PVC roll unwinder Double loading table

Tahun pembuatan: 2000, Kondisi: baik (bekas), Barberan Laminating Line For any inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum workpiece thickness: 3 mm Maximum workpiece thickness: 40 mm Maximum workpiece length: 2800 mm Minimum workpiece length: approx. 600 mm Crodeilqvrepfx Ahref Variable speed control from the brush cleaning station, maximum speed: 20 m/min. The line includes: - Tommassini automatic loading system (non-operational) - Top and bottom brushing machine - Pre-heating lamps before upper and lower glue rollers - PVAC glue applicator - Additional top and bottom drying lamps - Calender line with steel rollers for pressing - Additionally, the line is equipped with a purchased top-side corona treater (operational) – enables single-sided lamination with PP films

Kondisi: baru, BARBARIC B3 Vacuum Lifter, Pivotable, incl. Crane - Exhibition Unit - Crsdpsu R Szaefx Ahref Includes: - BARBARIC uniWood UWL 3 Vacuum Lifter, 150 kg capacity Vertical and horizontal transport of flat, standard commercial panels (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - 90° tilting range with pneumatic tilting mechanism - Complete configuration with hoist and corresponding safety features (vacuum gauge and hand slide valve with mechanical lock) - uniWood traverse with 2 suction cups Ø 270 mm on an adjustable beam (Beam length: 1,500 mm) Includes: - Reinforced version option BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction cups 500 x 250 mm on an adjustable beam (Beam length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version enables lifting materials up to 250 kg. Includes: - Comfort operation option BARBARIC uniWood All controls for the hoisting gear and vacuum lifter are integrated into a single control unit – our special handling grip. This allows single-handed operating of the system and guiding of the load. The lifting process can be infinitely controlled by frequency inverter. In the comfort configuration, complete with hoist and corresponding safety systems (vacuum gauge and 2-button safety operation for load release). Includes: - BARBARIC Column-Mounted Pivot Crane Load capacity at lifting device: 250 kg The stated capacity refers to the working load at the lifting device. Barbaric pivot cranes are designed for handling tasks in all application areas and are extremely lightweight. The kit consists of column, console, and low-friction jib. Pivoting and trolley traverse are done manually. Prerequisite for installation is a suitably rated concrete floor (C20/R5, at least 20 cm thick). Structural verification of the floor is the responsibility of the customer and must be documented accordingly. For installation on cracked concrete or weak subsoil, we can provide larger base plates on request. Fixing: Supplied with adhesive anchor for concrete floor. If ordered without lifting device, please specify cable or hose feed requirements! Delivery includes: trolley, energy supply system, and compressed air connection. - New exhibition machine -

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Crsdpfx Ahjfpb Nmsref Speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle shaft 30 mm, non-interchangeable CE compliant GS tested

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, wemhoehner_basic_1000_plus_en Crjdpsxbcudjfx Ahrjf

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: 02919475, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2004 - Working width: 1,200 mm - Working height: 900 mm +/- 20 mm - Operator side: left - Spray gun drive: single version - Dry extraction - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: 6,500 m³/h - Paper belt conveyor system - Feed speed steplessly adjustable: 1.5 – 7 m/min - PLC control with touchscreen - Number of installed spray units: 0 pcs - Height-adjustable spray units - Number of paint pumps: 0 pcs - Suitable for solvent-based paints Cedpfx Ahjv N D Ewjrjrf - Suitable for water-based paints - Length: 4,450 mm - Width: 3,360 mm + 1,000 mm - Height: 2,600 mm - Total connected load: approx. 7.1 kW / 28.6 A - Voltage, frequency: 400 V / 50 Hz - Location: in stock - Voltage fluctuations max. +/- 5 % ----- Optionally, we can also provide you with a separate quote for installation and commissioning of the system, as well as training of your personnel. Upon request, we also offer regular maintenance and servicing of the machine. For more information, please do not hesitate to contact us!