Laminator termal

Friz Optimat FKP 100/1/10/DH/R

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, *Mesin Wemhöner Variopress Model Basic 1000 Plus/Pin – Tahun Pembuatan 2008 *Kondisi sangat baik, jarang digunakan *Tipe KT-MB-28/15-240 *Dilengkapi dengan sistem pin otomatis dan pembalik gulungan inline Chodpfx Aqsxbcudeujb *2 meja dengan sistem Vario-Pin otomatis *Dilapisi Teflon untuk foil yang sudah diberi lem *Sistem penataan foil untuk meja pin (foil yang sudah diberi lem) *Ukuran pelat pemanas: 2800 x 1500 mm *Ukuran benda kerja maksimum: 2.540 x 1.250 mm *Membran: ya *Stasiun pemotongan *Rak penyimpanan foil setinggi 3,2 m dengan 14 batang penyangga *Pengontrol PLC Siemens S7 *Unit kontrol untuk pengontrol SPS SIEMENS TP 270 (layar sentuh) *Penegangan membran otomatis *Pasokan daya yang terpasang: 38,5 kW *Tekanan ruang maksimum: 6 bar *Bukaan pers maksimum: 150 mm *6 silinder dengan diameter 125 mm *Tegangan operasi: 400V 50/60Hz *Tinggi ruang pers: 40 / 60 mm *Tekanan pers maksimum: 2400 kN *Tekanan operasi sistem hidrolik: 320 bar

Kondisi: baru, Tahun pembuatan: 2026, Untuk penentuan jumlah lem yang profesional dan presisi pada lubang bor dowel dan alur dinding belakang. Ringkasan: • Jumlah lem yang selalu sama dan benar Chsdpfx Aedxz Tpoquob • Tidak memerlukan pembersihan sisa lem berlebih pada benda kerja • Pembersihan sistem lem yang paling mudah dan minimal (sekali seminggu melalui program bilas) • Penghematan biaya lem • Pistol lem ergonomis dan ringan dibandingkan dengan botol lem • Pekerjaan lebih cepat dan lebih akurat dibandingkan dengan botol lem

Kondisi: bekas, Valon Kone VK26M Mit Einlauf- und Auslauf-Förderbändern. Chsdpfx Aqovgtz Njujb

Kondisi: bekas, LOSER chamfering machine / dowel trimmer model AA220 - USED - Capacity: 7500/1500 dowels per hour - Dowel diameter capacity: 6-18 mm. Codsqpdkcopfx Aquehb

Tahun pembuatan: 2000, Kondisi: baik (bekas), Barberan Laminating Line For any inquiries, please contact: 790800714 The line is in continuous operation. Chodpfx Aqjilqvrsujb Maximum laminating width: 1300 mm Minimum workpiece thickness: 3 mm Maximum workpiece thickness: 40 mm Maximum workpiece length: 2800 mm Minimum workpiece length: approx. 600 mm Variable speed control from the brush cleaning station, maximum speed: 20 m/min. The line includes: - Tommassini automatic loading system (non-operational) - Top and bottom brushing machine - Pre-heating lamps before upper and lower glue rollers - PVAC glue applicator - Additional top and bottom drying lamps - Calender line with steel rollers for pressing - Additionally, the line is equipped with a purchased top-side corona treater (operational) – enables single-sided lamination with PP films

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: SÇ 502 S Alüminyum Pvc 3'lü kol yeri delme su tahliye makinesi yüksek frekans motorlu, • Complies with CE standards. • Capable of machining lock slots, hinge recesses, handle holes, and drainage channels on aluminum and PVC profiles. • Copy router head operates on the vertical axis. • Triple drilling unit operates on the horizontal axis. • Drainage system can work at an angled position. • Universal template allows for custom template creation upon request. • Each of the triple drilling, copy routing, or channeling units can operate independently. • High-frequency motor (18,000 rpm). Chsdpfx Asramz Hjqueb • Right conveyor system (1 meter).

Kondisi: baik (bekas), Tilting spindle moulder, table router, table milling machine - Spindle adjustment: height and angle - Tilting range: -3° to 45° - Motor power: 4.5/5.5 kW - Speeds: 3000/4500/6000/9000/12000 rpm - Power feed unit Holz-Her, 3 rollers - Usable shaft length: 100 mm - Spindle diameter: 30 mm - Max. cutter diameter: 220 mm Cjdpfx Aqeh Nvyzsuehb - Dimensions (L/W/H): 1540/1100/1520 mm - Weight: 962 kg

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers integrated into the table Codpshlp D Nefx Aqujhb - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead return rollers positioned in front of the lower head, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, with little use. Equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Kondisi: baru, 1 Chodpfx Aqoyrhtujujb

Kondisi: sangat baik (bekas), Direct drive Air flow: 12,000 m³/h Negative pressure: 4,880 Pa Motor power: 26 (30) kW Speed: 2,950 rpm Inlet diameter: 400 mm Outlet diameter: 400 mm Dimensions (L x W x H): 1,150 x 1,200 x 1,850 mm Note on used machines: Codpfx Aqoh Tfqheushb • Errors in technical specifications and prior sale reserved. • Stated prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen without any warranty claims. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries stating your address and telephone number!)