Tangki transportasi

G. Magyar SA

Tahun pembuatan: 2018, Kondisi: bekas, 2-vessel brewhouse mounted on a stainless steel frame as a brew block. This setup consists of the following components: - Mash/lauter tun made of stainless steel for mashing in, mashing, and draining the mash. Independent control of the thermo-oil heated jackets and bottom. The double-walled vessel is clad with insulation and features a polished interior surface. The top-mounted motor drives the cutting and stirring unit with stepless speed regulation. For lautering, there is a multi-piece perforated false bottom and a rectangular side manway for spent grain removal. Additionally, the vessel is equipped with a hinged lid, CIP spray head, temperature probe, and spraying unit. - Stainless steel wort kettle/whirlpool. The vessel is double-walled and features welded heating zones in both jacket and base, heated with thermo-oil. It is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable locking mechanism, and a tangential wort inlet for knockout. The inner surface is polished. - Single-stage plate heat exchanger for cooling wort from 100°C to 18°C while simultaneously heating water from 13°C to 77°C. The wort from one brew can thus be cooled within approximately one hour. Plates are made of stainless steel 1.4401 (AISI 316) and seals are EPDM. The wort chiller features a PT1000 temperature sensor. - Thermo-oil heater to heat the laser-welded heating zones of the brew vessels. Approximately 50-65 liters of oil are electrically heated in the thermo-oil tank to a maximum of 150°C. A safety switch automatically stops heating when 160°C is exceeded. The vessel is equipped with temperature and level sensors. A pump circulates the thermo-oil in a closed loop. - 12 hl hot water tank, standing separately on three legs, with a manway on top. The tank is heatable, insulated, and equipped with a hose level indicator, temperature probe, and hot water pump. - Centrifugal pump for product transfer between vessels and for CIP cleaning, with a motor power of 0.37 kW and stepless speed control. - Stainless steel piping and manual valves for redirecting product flows. Pipes are orbitally welded with polished inner surfaces. - Control unit with 10” touchscreen and PLC for brewhouse automation, housed in a stainless steel control cabinet. The following processes can be controlled and monitored: 1. On/off of agitator and cutting unit, and speed control. 2. Temperature control of mash/lauter tun. 3. Temperature control for kettle/whirlpool (separate for jacket and base). 4. On/off for product and CIP pump and speed control. 5. Display of inlet water temperature. 6. Display of wort temperature at outlet. 7. Temperature control of the thermo-oil tank. 8. Timer settings. 9. Mash program settings (multi-step mashing with up to 5 rests; adjustable times, temperatures, agitator and pump speeds). 10. Hot water tank temperature. Machine (additional): Compact brew block with hot water tank Max. wort output: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Fjdpfsw Tbmdsx Abhefu Operation / control: control cabinet with PLC and touchscreen Material: stainless steel 1.4301 (AISI 304) Base structure: brew block on stainless steel frame, hot water tank separate Equipment: mash/lauter tun; wort kettle/whirl...

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, Control: Mazatrol M Plus Travel paths: X-1660 Y-760 Z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle taper: SK 40 Tool changer: 24 stations Spindle speeds: 7,000 rpm Fjdsvrxd Hjpfx Abhefu Table usable area: 2000 x 760 mm Table load capacity: 1,000 kg Rapid traverse X, Y-axis: 24,000 mm/min Rapid traverse Z-axis: 20,000 mm/min Feed rate: 1 – 5,000 mm/min Machine weight: approx. 8,700 kg Including chip conveyor, coolant system. The machine can be inspected under power.

Kondisi: bekas, Brewhouse with a cast wort capacity of 20 hl, comprising the following components: 1. Milling system (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hopper, floor scale, grist transport, and control cabinet 2. 3-vessel compact brewhouse with insulated stainless steel vessels featuring copper covers, spindle station, and control cabinet 3. Fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tanks (Joh. Albrecht, 1999, 44 hl, 0.99 bar), and 6 x storage tanks (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4. Bright beer tank cellar with 2 x bright beer tanks (Speidel, 2021, 86 hl, 3 bar), 1 x bright beer tank (INOX, 2018, 67 hl, 3 bar), and 4 x bright beer tanks (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. Keg cleaning and filling system (BTB Multimat MT/2, 1997, 17–20 kegs/h) 6. Chiller unit as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) Ffodpfowgc Udjx Abhou 7. Steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-fired) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with control cabinet Need only part of the system? This unit is offered on a brokerage basis. Partial sale may be possible—just contact us and submit your offer. Machine (additional info): Cast wort capacity 20 hl, years built 1997–2021 Cast wort capacity: 20 hl Features: Milling system; 3-vessel compact brewhouse; fermentation vats; fermentation, storage and bright beer tanks; keg system; chiller unit; steam generator; hot water tank; CO2 liquid gas tank.

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), X/Y/Z travel: 2500mm/900mm/800mm, spindle speed: 18,000 rpm, spindle power: 35 kW, max. table load: 3,000 kg, tool stations: 30. Machine dimensions X/Y/Z: approx. 6,500mm/3,000mm/3,000mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840D, operating hours: 55,730h, spindle hours: 18,696h. Z-axis brake defective, machine enclosure shutter defective, monitor cable defective. Includes Knoll VRF 250/1250 coolant system. Documentation available. Inspection on site possible. Ffjdpfx Absvamqdsheu

Kondisi: bekas, Tahun pembuatan: 1995, Overview The bottle washing machine “Sirio 7” from the German manufacturer MAG was built in 1995. Maintenance has been carried out regularly by MAG. The machine can be inspected and tested in person. Technical details - Capacity: up to 7,000 bottles/hour - Bottle cells suitable for 1.0-litre bottles (smaller bottles can also be processed; additional insertion plates required) - Bottle diameter: 78 – 90 mm - Bottle height: 288 – 310 mm Fjdpfx Abetrbrqshjfu - Number of bottle cells per row: 10 - Dimensions (L x W x H): 7,880 mm x 3,045 mm x 3,325 mm - Empty weight: 14,300 kg - Full load weight: 25,600 kg - Installed power: 20.85 kW - Heating system: Steam, 3 bar

Kondisi: bekas, Tahun pembuatan: 1999, Overview The microbrewery was manufactured in 1999 by the German producer BERAPLAN. All equipment is in good condition. A new wort kettle was added in 2018. Equipment list: 1. Mash Tun Manufactured by Beraplan in 1999 Cylindrical design with conical bottom Material: stainless steel AISI 304 Internal diameter: 2000 mm Height: 1600 mm Height of conical section: 200 mm Capacity: max. 38 hl Double-walled insulation Steam-heated with adjustable control Hot and cold water inlets at the bottom Bottom outlet for complete drainage 4 CIP spray balls PT100 temperature sensor 2 agitators with variable speed control Mash pump with adjustable speed 2. Lauter Tun Manufactured by Beraplan in 1999 Cylindrical design with flat bottom Material: stainless steel AISI 304 Internal diameter: 2000 mm Height: 1200 mm Capacity: max. 37 hl Ffodpol Hxmdsfx Abheu False bottom with trapezoidal perforation High-precision valve for regulating flow rate Hot and cold water inlets at the bottom 4 CIP spray balls PT100 temperature sensor 3. Wort Kettle Manufactured by FRACCHIOLLA in 2018 Steam-heated CIP spray balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Manufactured by Beraplan in 1999 Cylindrical design with flat bottom Material: stainless steel AISI 304 Internal diameter: 2000 mm Height: 1250 mm Capacity: max. 40 hl Double-walled CIP spray balls Transfer pump from Alfa Laval Solid C-2 (2.2 kW) 5. Hot Water Tank Cylindrical design with flat bottom Material: stainless steel AISI 304 Internal diameter: 2000 mm Height: 2700 mm Capacity: max. 85 hl Double-walled CIP spray balls Transfer pump from Alfa Laval Solid C-2 (7.5 kW) Steam heated with temperature control 6. Heat Exchanger Manufactured by MDC (France) Plate heat exchanger, double-zone Model: RDC 307 Capacity: 30 hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump

Kondisi: bekas, Tahun pembuatan: 1987, Technical Details: Ffodpfx Aeu Idbyebhou X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Table tilting +/-: A-axis: 20° / 60° Table rotation: B-axis: 360° Control: Maho 432 (3D path control) Max. milling capacity: ST: 60 mm and GG: 22 mm Tool magazine with: 24 positions Spindle speed range: 20 - 6300 rpm Max. table load: 200 kg Spindle taper: ISO 40 (hydraulic clamping) Spindle head swivelling left and right: 90° (manual) Quill stroke: 80 mm Feed rate range: X/Z: 1 - 3000, Y: 1 - 4000, B: 0.1 - 3000°/min. mm/min Rapid traverse: X/Z: 10, Y: 8, B: 20 rpm, m/min Control voltage: 110/220 V Total power requirement: approx. 20 kVA Machine weight approx.: 5.5 t Machine dimensions approx. LxWxH: 3.0 x 2.4 x 2.25 m Space requirement approx.: 5.2 x 5.0 x H: 2.3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-speed gearbox Work spindle can be pivoted out for horizontal spindle use Equipment: -Handheld control unit -Coolant system -Machine lighting

Kondisi: sangat baik (bekas), - Atmospheric pressure Ffodsrigczspfx Abhou - Tanks for fermentation and storage of wine or beer - 400 mm dome made of stainless steel AISI 304 - Nitrogen inlet with 3/8" stainless steel ball valve - Cleaning line with DIN 32 connection - Cleaning ball made of stainless steel AISI 316, Ø 65 mm - Level indicator with return flow into the tank - Sampling valve - Conical bottom 30° - Residue drain with DIN 25 disk valve - Clear drain with DIN 25 disk valve - Bimetal thermometer made of stainless steel -20 °C/+80 °C with 200 mm shaft - 3 adjustable stainless steel feet - Dimensions: Ø 800 x 1950 mm (h) - Interior high-gloss polished, exterior marbled

Kondisi: sangat baik (bekas), Edelstahltank 2 m³ Ffodpfsq U Aufex Abhju

Kondisi: bekas, Tahun pembuatan: 2000, Overview The rinser is designed for cleaning and sterilising containers and was manufactured in 2000 by the German company Krones. The machine has already been dismantled and placed in storage. Technical Details • Capacity: up to 32,000 containers per hour • Number of rinsing stations: 50 (some stations are missing) • Direction of rotation: counterclockwise • Suitable for: glass and PET containers Fedpfsn S A R Sex Abhefu • Wetted parts made of stainless steel (V2A) • Centralised lubrication system • Comprehensive documentation available • Electropneumatic valve control • Siemens S7 control system • Voltage: 400 / 230 V • Frequency: 50 Hz • Control voltage: 24 V DC