Berbeda

Gallus TCS 250

The Gallus TCS 250, manufactured by Gallus in 2016, is a high-performance label printing machine engineered for efficiency and precision. With a web width of 265 mm and a print count of two million, this press is currently in stock and located in Germany.

This machine is equipped with a wide range of advanced features to accommodate diverse printing requirements. It operates at a speed of 11,000 impressions per hour and features a cylinder circumference of 254 mm, matching a web width of 265 mm. The hot-foil stamping unit runs at up to 8,000 cycles per hour, with a maximum print width of 265 mm and a minimum width of 130 mm, allowing for precise format adjustments in 0.01 mm increments. The main unit operates at 400 V, with peripheral equipment at 230 V, at a frequency of 50 Hz.

Key features include a web cleaning feed unit, corona pre-treatment for enhanced adhesion, as well as trim and suction systems. The press can handle paper weights from 80 to 180 gsm and cardboard up to 300 gsm at a maximum thickness of 0.3 mm. The machine is compatible with commercially available adhesives and supports UV offset printing. The configuration includes 4 printing units, 1 coating unit, 1 rotary die-cutting unit, and a rotary hot-foil stamping unit.

Additional features comprise web inspection via the manual Powerscope 4000 system, a water-cooled Uviterno Coldstar UV drying model, 4 slitting knives, web tension monitoring, and an IR dryer. The maximum web diameter is 800 mm. The press is equipped with remote maintenance capability, a plate tool, and maintenance tools for straightforward operation and service.

Format: 265 mm
Bedpfx Afevfx A Ao Sscu

Specifications:
- Speed: 11,000 sheets/hour
- Cylinder circumference: 254 mm
- Web width: 265 mm
- Hot-foil stamping speed: 8,000 cycles/hour
- Maximum print width: 265 mm
- Minimum print width: 130 mm
- Format length pitch: 0.01 mm
- Machine voltage: 400 V
- Peripherals voltage: 230 V
- Mains frequency: 50 Hz
- Web cleaning on infeed
- Corona pre-treatment
- Trimming and suction system
- Paper: 80 to 180 gsm
- Cardboard: up to 300 gsm at max. 0.3 mm
- Commercially available adhesive systems
- UV offset
- 4 printing units
- 1 coating unit
- 1 rotary die-cutting unit
- Rotary hot-foil stamping unit
- Web inspection
- Web inspection system: Powerscope 4000 (manual)
- Drying model: Uviterno Coldstar (water-cooled)
- Drying type: UV
- Slitting knives: 4
- Web tension monitoring
- IR dryer
- Max. web diameter: 800 mm
- Remote maintenance
- Plate tool
- Maintenance tools

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.