Pusat pemesinan berkelanjutan

Gannomat GANNOMAT "PROTEC 571" (Bohren, Nuten, Fr

Kondisi: bekas, Tahun pembuatan: 2024, Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW, fully equipped in standard configuration with: - Fully automatic electronic control with pulse operation via foot valve: clamping – drilling – releasing, plus electrical skip cycle function. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth when drilling from the edge. This eliminates the need to adjust the drilling depth when switching from face to edge drilling (+10 mm, e.g. for dowel length 35 mm, face drilling depth 14 mm and edge drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system) for easy bit change. - Simple swivel motion of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier, movable along the Y-axis, with 3 pneumatic clamps for workpiece height up to max. 80 mm. Ideal stop system including: Nwjdpfoxnlflsx Abwjh - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 flip stops, - Quick-change system, easily switchable from right to left stops for mirror-image drilling of shelves in carcass construction; also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height positioning over the support table with mechanical digital counters. - Side stops can be easily swung away for quick conversion between carcass, frame, and line boring. - Clamping arms for clamp carrier suitable for line boring positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of dowel drill bits: - 5 carbide dowel drill bits, Ø 8x77 mm, right - 4 carbide dowel drill bits, Ø 8x77 mm, left Basic machine Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW completely in standard version with: - Fully automatic electronic control with pulse operation via foot valve for clamping – drilling – releasing, with electrical skip cycle. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for edge drilling (as above). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system). - Simple swivel of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier movable on Y-axis with 3 pneumatic cylinders for workpiece up to max. 80 mm height. - Ideal stop system as above (1800 mm stop rail, 40x40 mm aluminum profile, 3 flip stops, quick change from right to left for mirrored shelf drilling; also usable for 32 mm system line boring). - Side stops and position adjustments, and drilling height setting above the support table via mechanical digital counters. - Side stops easily swiveling away for fast changeover between carcass, frame, and line boring. - Clamping arms on clamp carrier for row positions up to max. 300 mm. - Ideally structured three-stage tool system. - Extraction funnel, dust-tested, ø 120 mm - 1 set for line boring in 32 mm system

Kondisi: baru, Tahun pembuatan: 2026, Mesin bor deret ganda dan aksesori, SISTEM 32. Mesin bor deret dengan 2 balok bor masing-masing 25 spindel bor presisi. Gambaran singkat: • Pemboran deret lubang dalam SISTEM 32 mm • 50 (2 x 25) lubang bor dalam satu siklus bor • Penyeimbang kedalaman lubang untuk kedalaman bor yang berbeda • Gearbox bor presisi solid dari GANNOMAT Nedpfx Aodxz Ntsbwswh • Pemboran konektor furnitur deret dan engsel cangkir (opsional) • Unit bor ketiga opsional

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 50 kg, tinggi benda kerja (maks.): 900 mm, panjang benda kerja (maks.): 2.600 mm, kedalaman pengeboran: 25 mm, kecepatan spindel (maks.): 24.000 rpm, TECHNICAL DETAILS Workpiece Dimensions Length min: 200 mm Length max: 2,600 mm Height min: 35 mm Height max: 900 mm Thickness min: 8 mm Thickness max: 60 mm Maximum panel weight: 50 kg Length with extension: max. 3,200 mm Drilling Head Unit BH17 Vertical chucks: 10 Horizontal double chucks: 3 Circular saw blade diameter: 120 mm Max. working depth: 25 mm Saw blade thickness: 4 mm Rotation: clockwise Electrospindle Power at 12,000 – 15,000 rpm (S1): 5.5 kW Speed range: 1,000 – 24,000 rpm Rotation: clockwise EQUIPMENT BSolid Software – 3D CAD-CAM design software (simulation and management of processes for machining and drilling centers, option to select additional modules for extended functions according to production requirements) Note: Disassembly and loading can be offered by a Biesse service partner for €2,000. Nwodsw Hqrkjpfx Abwsh