Kompresor / Kompresor

Gardner Denver SKG-275.2V.02 (60)

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (LxWxH): 1,414 x 503 x 1,350 mm (without connections in continuous bypass) Weight: approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control and regulation unit: Smart Controller (7" touch display) - Heater control via solid state relays - Control cabinet IP54 - Cooling controlled by solenoid valve - Flow measurement by differential pressure method - Bypass between supply and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by detection of heater surface temperature and flow rate - Dirt filter in cooling water inlet and in return of circulation system - Monitoring of supply temperature by electronic safety temperature limiter - External oil filler neck - DILO-type fittings on internal piping connections (except pump connections) - At 350°C: Continuous bypass, including bellows valves - Connection for nitrogen blanket with manometer and safety valve set to 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are specified in quotations or order confirmations. Ndsdpfjg Ey Rfjx Ab Eed

Tahun pembuatan: 1990, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 647-230, Hamba die-cutting machine without tool Type 647-230 Film width: 230 mm Very good condition Made in Germany - Supplied with used embossing calendar for worm pattern - Power connection: 220/380V – three-phase - Additional punching tools available – e.g.: Nodjnr Ex Tspfx Ab Ejdd 2x double tool – diameter 75.50 mm 1x double tool – diameter 59.54 mm 1x double tool – diameter 80.50 mm 1x double tool – diameter 93.80 x 120.90 mm

Kondisi: baru, Tahun pembuatan: 2025, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade bore: 50 mm Blade speed: 2800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled on one side up to approx. 25° for acute angles and tilted to the left up to 30° TCT circular saw blade 520x4.0/2.8 x 50 mm, 60 ATB teeth, negative hook angle, for wood RLH-ST60 measuring length 6.0 m, mounting side: left Length stop / roller conveyor, heavy-duty version, Ndedpfxsk H Ic Uo Ab Esd Stop carriage adjustable from operator position via handwheel, electronic-digital measuring display, stop carriage pneumatically clamped, stop flap folds away to the rear, with steel rollers, 60 mm diameter, roller pitch 200 mm, 400 mm roller width, with 4 support legs and connector, total length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230-volt mains operation, with electric ON/OFF switch and socket. Powerful dark red LED display. Higher precision than the battery-powered crystal display RO-ST60 4.0 m long infeed roller conveyor Mounting side: right Heavy-duty version, steel rollers: 60 mm diameter, roller pitch: 200 mm 400 mm roller width, 3 support legs and connector Location: Ex stock 54634 Bitburg - Immediately available - Image: similar. Machine still in original packaging

Tahun pembuatan: 1996, Kondisi: baik (bekas), nomor mesin/kendaraan: 01049, Angebot 22461 Technical Data: - Rated power at 50% duty cycle: 35 kVA - Maximum welding power: 75 kVA - Throat depth adjustable: 280 to 600 mm - Stroke: 5 to 50 mm - Welding capacity (mild steel sheets): approx. 4 + 4 mm - Electrode force adjustable up to: 44.5 daN - Cooling water flow rate: 4 l/min Nedpfx Absimbmrj Ejdd - Connection: 400 V - Dimensions (approx.): W 800 x H 1700 x D 1050 mm - Weight (approx.): 220 kg - Equipped with: - Single-phase control T 90 Mark II - Foot switch

Kondisi: baru, Sheet width: 2050 mm Sheet thickness: 3 mm Frame gap: 2100 mm Back gauge - adjustable: 600 mm Connected load: kW Machine weight approx.: 1.1 t Dimensions (L x W x H): 2.7 x 2.1 x 1.4 m The machine operates quietly and is energy-efficient thanks to its gear motor with brake system. Our machine is manufactured as a monoblock frame, welded from ST42 quality material. The machine blades are made of 2379 quality steel, brand name BOHLER. These high-grade blades ensure precise cutting. Emergency stop button, foot switch, and finger guard are included as standard equipment. (Documentation available in English only) Nsdpfx Absfv H Dkj Eedd

Kondisi: bekas, Mount: MK 4 Ndjdpfob N Ezrox Ab Eed

Kondisi: bekas, nomor mesin/kendaraan: 007829, Posisi 1: Gergaji Panel – Pengisian dari depan SCHELLING-FH 4 430/220-P Ndodpowu Ahgofx Ab Eod Posisi 2: Gudang Otomatis SCHELLING-FH 4 430/220-P

Kondisi: bekas, Tahun pembuatan: 1995, diameter pembubutan di atas alas geser: 500 mm, Universal lathe Manufacturer: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Type: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Ndedpfowudhusx Ab Eed Swing diameter over bed: 500 mm Spindle bore: 73 mm Dimensions: L 2.7 x W 1.2 x H 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change tool holder • Rotating centre • Coolant pump • Machine lamp All details without guarantee. A demonstration under power is possible at any time in our showroom.

Tahun pembuatan: 2002, Kondisi: bekas, Press force 63 t Throat depth 315 mm Ndodelp U D Topfx Ab Esd Stroke 8–100 mm Strokes per minute 140 spm Ram adjustment 63 mm Table size 1200 x 630 mm Ram surface 800 x 315 mm Passage opening in table Ø 110 mm Table height 820 mm Ram bore Ø 50 mm Shut height 335 mm Total power requirement 7.5 kW Machine weight approx. 5 t Pneumatic clutch/brake combination Central oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand control Foot control Roller block rails in table Hydraulic clamp on ram Compensating cylinder Approved for manual loading operations

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, jam operasional: 158 h, jangkauan lengan: 1.300 mm, Halo, Ndedjp E T N Aopfx Ab Esd kami menjual robot demonstrasi UR10e, yang digunakan untuk studi konsep yang akhirnya dibatalkan.